Canon ImagePRESS C800 Series Manuel utilisateur

Read this guide rst.

Please read this guide before operating this product. After you ﬁnish reading the guide, store it in

a safe place for future reference.

Quick Guide

imagePRESS C800/C700/C60

Practical Features

Auto Gradation Adjustment for Various

Paper Types

The Auto Adjust Gradation function adjusts the gradation, density,

and color tone of images, and only requires you to scan the test

page. This function can be used for various weights of paper so that

a high quality print result can be obtained in different paper types.

"Adjustment for Image Quality and Finishing (Calibration)" in the

e-Manual

Achieve High Quality Color Reproduction

with Auto Color Tone Correction

Compared to the Auto Adjust Gradation function, which adjusts

CMYK, the Auto Correct Color Tone function adjusts mixed colors

that are expressed with multiple toner. By using these functions

together, you can perform the precise color adjustment.

"Adjustment for Image Quality and Finishing (Calibration)" in the

e-Manual

Optimum Print Result for Each Paper Type

Paper information, which includes the basis weight, finish, fixing, and

curl correction level, can be registered as the paper characteristics.

As the detailed information can be specified for each different paper

type, you can obtain the fine print result with considering the paper

characteristics. This function is also effective for improving paper

conveyance and print quality.

"Paper Type Management" in the e-Manual

Curl Correction for Stable Paper Conveyance

The machine constantly corrects the paper curl which occurs due

to the pressure applied when toner is fixed. Moreover, by correcting

the paper curl during outputting, the machine reduces the risk of

a paper jam, and achieves the stable paper conveyance. The curl

correction can be specified for each paper type you want to use.

"Adjustment for Image Quality and Finishing (Calibration)" in the

e-Manual

"Paper Type Management" in the e-Manual

Easy Operation for Adjusting Image Position

You can adjust the image positions easily with this machine. All you

need is measuring marks on the test page and then entering the

measured values on the touch panel display. After that, the machine

will automatically adjust the image positions. You can make the

complicated adjustment easily by entering values for each edge of

front and back sides on a single screen.

"Paper Type Management" in the e-Manual

Quick Access to Frequently Used Settings

Different settings are required, depending on the printing purpose

or paper types, but accessing setting items located in various menus

every time is a quite complicated operation. In this case, register

frequently used settings in "Settings/Registration Shortcut" button.

You can directly access to the setting screen with this button and

save the effort to search necessary setting items.

"Settings/Registration" in the e-Manual

Alternative Settings for Your Needs,

"Productivity" or "Quality"

You can set a priority to either print productivity or image quality. For

instance, select "Productivity Priority" when printing a large number

of documents to achieve speedy printing. On the other hands, select

"Quality Priority" when printing documents which contain many

pictures to obtain precisely printed images. This function can be set

for each paper type to suit your various needs for printing.

"Settings/Registration" in the e-Manual

Contents

Thank you for purchasing this Canon product. Please read this manual thoroughly before operating the machine

to familiarize yourself with its capabilities, and to make the most of its many functions. For more information on

the detailed settings for the functions, see the e-Manual. After reading this manual, store it in a safe place for future

reference.

Symbols Used in This Manual

WARNING

Indicates a warning concerning operations that may lead to death or injury to persons if not

performed correctly. To use the machine safely, always pay attention to these warnings.

CAUTION

Indicates a caution concerning operations that may lead to injury to persons if not performed

correctly. To use the machine safely, always pay attention to these cautions.

IMP

RTANT Indicates operational requirements and restrictions. Be sure to read these items carefully to

operate the machine correctly, and avoid damage to the machine or property.

TE Indicates a clarification of an operation, or contains additional explanations for a procedure.

Reading these notes is highly recommended.

OPTION Indicates an optional product which can be used with this machine.

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . 6

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Maintenance and Inspections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Consumables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Parts and Their Functions. . . . . . . . . . . . . . . . . . . . . . . . . 13

Front View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Back View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Control Panel (Upright Control Panel-D1) . . . . . . . . . . . . . . . . . . .16

Status Monitor/Cancel Screen . . . . . . . . . . . . . . . . . . . . 18

How to Turn ON the Main Power. . . . . . . . . . . . . . . . . . 19

Turning ON the Main Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Shutting Down the Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Available Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Registering Paper Types in the Paper Database. . . . . . . . . . . . . .22

Loading Paper into the Paper Drawer . . . . . . . . . . . . . . . . . . . . . . .23

Selecting Paper Types from the Paper Database. . . . . . . . . . . . .24

Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . . 25

Cleaning the Platen Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Cleaning the Original Scanning Area. . . . . . . . . . . . . . . . . . . . . . . .25

Cleaning the Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Automatic Feeder Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Cleaning the Inside of the Main Unit . . . . . . . . . . . . . . . . . . . . . . . .27

Refreshing the Fixing Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Cleaning the Touch Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Inspection of the Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Clearing Paper Jams and Staple Jams . . . . . . . . . . . . . . . . . . . . . . .32

Reducing the Frequency of Paper Jams . . . . . . . . . . . . . . . . . . . . .32

When an Error Message Is Displayed . . . . . . . . . . . . . . . . . . . . . . . .33

Contacting Your Local Authorized Canon Dealer . . . . . . . . . . . .34

If Memory Becomes Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

If the Main Power Does Not Turn ON. . . . . . . . . . . . . . . . . . . . . . . .35

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Keys and Buttons Used in This Manual

The followings are examples of how keys and

buttons are expressed in this manual.

• Touch Panel Display Keys: [Key Name]

 [Copy] [Close]

• Control Panel Keys: Key Icon (Key Name)

(Start) (Stop)

• Buttons on Computer Operation Screens: [Button

Name]

[OK], [Add], [Cancel]

Illustrations Used in This Manual

Illustrations used in this manual are those displayed when

the imagePRESS C800 has the following optional equipment

attached to it: the Duplex Color Image Reader Unit-H1, Upright

Control Panel-D1, and Output Tray-A1.

Manuals for the Machine

The manuals for this machine are divided as follows. Please refer to them for detailed information.

Printed manuals Manuals included in the accompanying CD-ROM

* The CD-ROM/DVD-ROM provided for this product may include manuals in PDF format. If you do not have access to Adobe Reader to

view the manuals in PDF format, try other programs such as PDF Preview developed by Vivid Document Imaging Technologies.

Quick Guide (This manual)

Describes the precautions for using the machine, parts names and functions, basic operations, and

specifications of the machine.

e-Manual

Describes all the functions of the machine. Also provided with a search function that is useful for finding

information.

Driver Installation Guide

Provides instructions on installing the drivers. The following installation guides are included in the same

CD-ROM as each driver.

Windows: Printer Driver Installation Guide, Color Network ScanGear 2 Installation Guide

Macintosh: Canon Printer Driver Guide

Important Safety Instructions

These "Important Safety Instructions" are intended to prevent injury to user or other persons or destruction of

property. Please read these instructions thoroughly before operating the machine. Also, since it may result in

unexpected accidents or injuries, do not perform any operation unless otherwise specified in the manual. Improper

operation or use of this machine could result in personal injury and/or damage requiring extensive repair that may not

be covered under your Limited Warranty.

▀

Installation

Read the following installation precautions thoroughly to maintain a comfortable and safe working environment, in

areas of machine operation.

Do not install the machine in locations where there

are risks of a fire or electrical shock

•

A location where the ventilation slots are blocked

(i.e. by the walls, on the soft surface such as a bed,

sofa, or rug)

• A damp or dusty location

• A location exposed to direct sunlight

• A location subject to high temperatures

• A location near open flames

• A location near alcohol, paint thinner, or other

flammable substances

Other Warnings

• Do not place jewelry and other metal objects,

or containers filled with water or liquids on the

machine. If these items come into contact with a

high-voltage area inside the machine, it may result in

a fire or electrical shock.

• Do not use the machine near any medical

equipment. Electric waves emitted from the machine

may interfere with medical equipment, which may

result in a malfunction or personal injury.

• If objects are dropped or spilled inside the machine,

immediately turn OFF the main power switch, and

disconnect the power cord from the power outlet.

Then, contact your local authorized Canon dealer.

WARNING

CAUTION

Do not install the machine in unstable locations

Installing the machine in the following locations

my cause the machine to fall or tip over, resulting in

personal injury.

• An unsteady platform

• A location subject to excessive vibrations

Do not remove the leveling feet

Do not remove the machine’s leveling feet after the

machine has been installed, as this may cause the

machine to fall or tip over, resulting in personal injury.

Avoid installing the machine at high altitudes of

about 3,000 meters above sea level, or higher.

Machines with a hard disk may not operate properly

when used at high altitudes of about 3,000 meters

above sea level, or higher.

Important Safety Instructions

IMP

RTANT

Do not install the machine in the following locations

• A location subject to rapid changes in temperature

and humidity

• A location near equipment that generates magnetic

waves or electromagnetic waves

• A location where chemical reactions occur, such as a

laboratory

• A location exposed to corrosive gas or toxic gas

• A location where the floor may be warped due to

the weight of the machine, such as on a carpet

Avoid poorly ventilated locations

This machine generates a slight amount of ozone

etc. during normal use. Although sensitivity to ozone

etc. may vary, this amount is not harmful. Ozone etc.

may be more noticeable during extended use or long

production runs, especially in poorly ventilated rooms.

It is recommended that the room be appropriately

ventilated, sufficient to maintain a comfortable

working environment, in areas of machine operation.

In addition, do not install this machine where it

exhausts directly onto a person.

Do not install the machine in a location where

condensation occurs

If the room where the machine is installed is heated

rapidly, or the machine is moved from a cool, dry

location to a hot, humid location, water droplets

(condensation) may form inside the machine. This

may result in paper jams, poor print quality, or a

malfunction. To prevent these problems, wait at

least two hours before using the machine in order to

adapt the machine to the ambient temperature and

humidity.

Provide Adequate Installation Space

Provide enough space on each side of the machine for unrestricted operation.

76 7/8" (1,952 mm)

60" (1,524 mm)

4" (100 mm) or more*1

289 3/8" (7,349 mm)

311/2"(800 mm) or more*2

69 1/2"(1,765 mm)

When the Output Tray-A1, Duplex Color

Image Reader Unit-H1, and Upright

Control Panel-D1 are attached.

When the Two-Knife Booklet Trimmer-A1, Booklet Trimmer-D1, Saddle

Finisher-AM2, Paper Folding Unit-F1, High Capacity Stacker-G1, Perfect

Binder-D1, Professional Puncher Integration Unit-C1, Professional

Puncher-B1, Document Insertion Unit-M1, Duplex Color Image Reader

Unit-H1, Upright Control Panel-D1, and Multi-drawer Paper Deck-B1 are

attached.

*1 Make sure to provide at least 31 1/2" (800 mm) of space if you attach one or more of the following: Paper Folding Unit-F1, Professional

Puncher-B1, Document Insertion Unit-M1, Multi-drawer Paper Deck-B1, Perfect Binder-D1, or High Capacity Stacker-G1.

*2 Make sure to provide at least 4" (100 mm) of space if none of the Paper Folding Unit-F1, Professional Puncher-B1, Document Insertion

Unit-M1, Multi-drawer Paper Deck-B1, Perfect Binder-D1, or High Capacity Stacker-G1 is attached.

▀

Power Supply

Plug the machine into an outlet that is 208 V AC 20 A or greater.

WARNING

• Do not use power supplies with voltages other than

those specified herein, as this may result in a fire or

electrical shock.

• Do not use power cords other than the provided

power cord, as this may result in a fire or electrical

shock.

• The provided power cord is intended for use with

this machine. Do not connect the power cord to

other devices.

• Do not damage, modify, pull on, or excessively bend

the power cord. Also do not place heavy objects

on the power cord, as this could cause electrical

damage and result in a fire or electrical shock.

• Do not connect or disconnect the power plug with

wet hands, as this may result in electrical shock.

• Do not connect the power cord to a multiplug

power strip, or do not use extension cords, as this

may cause a fire or electrical shock.

• Do not bundle up or tie the power cord in a knot, as

this may result in a fire or electrical shock.

• Insert the power plug completely into the power

outlet, as failure to do so may result in a fire or

electrical shock.

• When there is thunder and lightning, disconnect the

power plug from the power outlet, as failure to do so

may result in a fire, malfunction, or electrical shock.

CAUTION

• Do not connect any unauthorized optional products

to the outlet for connecting optional products, as

this could result in a fire or smoke.

• Install this machine near the power outlet and leave

sufficient space around the power plug so that it can

be unplugged easily in an emergency.

IMP

RTANT

Power supply connection

• Do not connect the power cord to an uninterruptible

power source.

• If the machine is connected to the power outlet with

multiple sockets, do not use the remaining sockets

to connect other devices.

• It is recommended that the power outlet wired to an

indoor circuit breaker is used.

• When disconnecting the power cord, wait at least 5

seconds before connecting the power cord again.

Other Precautions

Electrical noise and excessive voltage drop may cause

a malfunction or loss of data in the machine and

computers.

Important Safety Instructions

▀

Handling

WARNING

• If the machine makes strange noises, or gives off

smoke, heat, or strange smells, immediately turn

OFF the main power switch, and disconnect the

power cord from the power outlet. Then, contact

your local authorized Canon dealer. Continued use of

the machine in this condition may result in a fire or

electrical shock.

• Do not attempt to disassemble or modify the

machine. There are high-temperature and high-

voltage components inside the machine, and

contact with those components may result in a fire

or electrical shock.

• If you are using a cardiac pacemaker and feel

abnormalities, please move away from the product

immediately. This product emits low level magnetic

flux.

• Do not use highly flammable sprays near the

machine. If gas from these sprays comes into contact

with the electrical components inside the machine,

it may result in a fire or electrical shock.

• When moving the machine, always turn OFF the

main power switch, disconnect the power plug from

the power outlet, and then unplug the interface

cable. Otherwise, the power cord or interface cable

may be damaged, resulting in a fire or electrical

shock.

CAUTION

• Do not place heavy objects on the machine, as they

may fall or tip over, resulting in personal injury.

• For your safety, disconnect the power cord when the

machine will not be used for an extended period of

time.

• When opening and closing covers, be careful not to

get your hands caught, as this may result in personal

injury.

• Keep your hands, hair, clothing, etc. away from

the rollers in the output area, as your hand, hair, or

clothing may get caught in the rollers which may

result in personal injury.

• In order to prevent burns, do not touch the fixing

transport unit and its surroundings and output area

when using the machine, as these areas are very hot

during use. Also, be careful when handling printed

paper as it may be hot especially during continuous

printing.

• Paper that has just been output from the machine

may be hot. Be careful when removing or aligning

paper from the output tray. Touching paper right after

it is output may result in low-temperature burns.

• Do not press down the feeder forcefully when using

the platen glass to make copies of thick books.

Doing so may damage the platen glass and result in

personal injury.

• Be careful not to drop heavy object, such as a

dictionary, on the platen glass. Doing so may

damage the platen glass and result in personal injury.

• There are high-voltage components inside the

machine. Do not touch the labeled component and

its surroundings when removing jammed paper or

inspecting the inside of the machine, as doing so

may result in an electrical shock.

• Do not touch the finisher and its trays while the

machine is operating, when the optional finisher

is attached to the machine. Do not place your

hands near the rollers of the tray where stapling is

performed. Doing so may result in personal injury.

Laser beam

The laser beam can be harmful to human bodies. Since

radiation emitted inside the product is completely

confined within protective housings and external

covers, the laser beam cannot escape from the

machine during any phase of user operation. Read the

following remarks and instructions for safety.

• Never open covers other than those instructed in the

manuals for this machine.

• Do not remove the caution label which is attached

to the machine.

Controlling, adjusting, or operating the machine in

ways not mentioned in the manuals for this machine

may cause dangerous radiation to escape from the

machine. If the laser beam escapes from the machine,

exposure may cause serious damage to your eyes.

IMP

RTANT

• Follow the instructions in the caution label attached

to the machine.

• Do not shake the machine or do not apply shock to

the machine.

• Do not forcibly open and close covers and other

parts of the machine. Doing so may result in damage

to the machine.

• During printing, do not turn OFF the main power,

open and close covers, or load and remove paper, in

order to prevent a paper jam.

• Do not use this product for uses other than as a color

digital multitasking machine.

Transporting the machine

If you intend to move the machine over a long

distance, contact your local authorized Canon dealer

beforehand. Do not attempt to move the machine

yourself.

Autres manuels pour imagePRESS C800 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Imprimante tout-en-un

Canon

Canon ImageRunner Advance 6575i III Guide d'installation

Canon

Canon imageRUNNER 1750iF Guide de sécurité

Canon

Canon imageCLASS MF6500 Series Guide de sécurité

Canon

Canon ImageRUNNER 1022iF Manuel utilisateur

Canon

Canon iR3245 Manuel utilisateur

Canon

Canon ImageCLASS MF3240 Series Guide de l'utilisateur

Canon

Canon MF7280 - ImageCLASS B/W Laser Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE C3325i Manuel utilisateur

Canon

Canon MultiPASS F50 Guide de sécurité

Canon

Canon imageRUNNER ADVANCE C5255 Instructions de montage

Canon

Canon PIXMA MX394 Guide de configuration

Canon

Canon imageRUNNER 2545i Fiche d'information produit

Canon

Canon IMAGERUNNER 2530 Manuel utilisateur

Canon

Canon MF542 Series Manuel utilisateur

Canon

Canon IR5000 - iR B/W Laser Manuel d'installation et d'exploitation

Canon

Canon PIXMA MX7600 Manuel

Canon

Canon GP160F Manuel utilisateur

Canon

Canon imageCLASS D760 Manuel utilisateur

Canon

Canon imageCLASS MF6500 Series Guide de l'utilisateur

Canon

Canon PIXMA MG8220 Series Manuel utilisateur

Canon

Canon imageRUNNER 2320 Manuel utilisateur

Canon

Canon MF267dw II Manuel utilisateur

Canon

Canon PIXMA MG7500 Series Manuel utilisateur

Canon

Canon FaxPhone L120 Guide de sécurité

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur

Canon imagePRESS C800 Series Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques