Canon Color imageCLASS MF8180c Guide de sécurité

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

CANON U.S.A., INC.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

CANON CANADA INC.

6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada

CANON EUROPA N.V.

Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands

CANON FRANCE S.A.S.

17, quai du Président Paul Doumer 92414 Courbevoie Cedex, France

CANON COMMUNICATION & IMAGE FRANCE S.A.S.

12, rue de l’Industrie 92414 Courbevoie Cedex, France

CANON (U.K.) LTD.

Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom

CANON DEUTSCHLAND GmbH

Europark Fichtenhain A10, 47807 Krefeld, Germany

CANON ITALIA S.p.A.

Via Milano, 8 20097 San Donato Milanese (MI) Italy

CANON ESPAÑA, S.A.

c/ Joaquín Costa 41, 28002 Madrid, Spain

CANON LATIN AMERICA, INC.

703 Waterford Way Suite 400, Miami, Florida 33126 U.S.A.

CANON AUSTRALIA PTY. LTD

1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia

CANON CHINA CO.,LTD

15F, North Tower, Beijing Kerry Centre, 1 Guang Hua Road, Chao Yang District, 100020, Beijing, China

CANON SINGAPORE PTE. LTD.

1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632

FA7-9216 (000) XXXXXXXX © CANON INC. 2006 PRINTED IN JAPAN OR CHINA

ENG

Starter Guide

Please read this guide before operating this equipment.

After you finish reading this guide, store it in a safe place for future reference.

Setting the Machine

Remove the Shipping Materials

1Remove all shipping tapes, styrofoam, and small black pad from the machine. 2Lift the document feeder slightly and pull

out the protective sheet straight to

remove.

3Lift the platen glass cover and remove

the tapes and protective sheets on the

platen glass.

4Remove the clear protective sheet on the

LCD display.

5Lift the scanning platform and remove the

tapes under it. Lower the platform

carefully.

Caution

Be careful not to catch your hand when lowering the

scanning platform as it may lead to personal injury.

6Attach the document feeder tray (A) on

the document feeder.

Do You Have Everything?

Before Setting Up the Machine Manuals for the Machine

●When carrying the machine, be sure to hold it

in the designated places as shown in the

illustration. Dropping the machine can cause

personal injury.

●The machine illustration may differ slightly from

your machine.

●Starter Guide (this document):

– Setting Up the Machine

– Software Installation and Network

Settings

●User’s Guide:

– Copying and Printing Instructions

– Troubleshooting

●Facsimile Guide:

– Fax Instructions

– Troubleshooting

●Software Guide:

– Software Installation and Instructions

– Printing and Scanning Instructions

– Troubleshooting

●Remote UI Guide:

– Remote User Interface Instructions

●Network Guide:

– Network Connectivity and Setup

Instructions

●Machine ●Drum Cartridge

(packed with a black plastic bag)

●Toner Cartridges

(Yellow, Magenta, Cyan, Black)

●Document Feeder Tray

●Starter Guide

●Facsimile Guide

●User Software CD

●Telephone Cable ●USB Cable

●Destination Labels (Fax Labels) ●Power Cord

Connect Telephone Cables

1Connect the supplied cable to the L (LINE) jack. Then connect the other end to the telephone line jack

on your wall.

2Connect an optional extension telephone or answering machine to the (EXT.) jack.

LINEEXT.

•Telephone or answering machine

•Telephone and answering machine

Connect external devices as follows:

Telephone

line

Telephone or

answering machine

Telephone

line

Answering

machine

LINE TEL Telephone

Machine

•Built-in computer modem and telephone

Telephone

line

Computer

LINE TEL Telephone

Machine

= Telephone line jack

= External device jack

Connect Power Cord and Select Language and Country

Connect the power cord into the rear socket and

the wall outlet (230V) to turn on the machine.

If the message <DISPLAY LANGUAGE>

appears, use [ ] or [ ] to select the language

for the LCD, then press [OK].

If the message <COUNTRY SELECT> appears,

use [ ] or [ ] to select the country, then press

[OK].

The machine enters the standby mode.

NOTE

• This machine has no power switch.

• <SUPPLY REC. PAPER CASSETTE:A4>, <INSERT ∗CARTRIDGE>, <INSERT DRUM> is displayed:

After installing the drum cartridge, toner cartridges and loading paper, the standby display appears.

∗Indicates either "C", "M", "Y", or "K".

WARNING

This product emits low level magnetic flux. If you use a

cardiac pacemaker and feel abnormalities, please move

away from this product and consult your doctor.

NOTE

– During electrical storms, disconnect the power cord

from the power outlet. (Please note that received

documents stored in the machine’s memory may be

lost when you unplug the machine.)

– Whenever you unplug the machine, wait at least five

seconds before you plug it in again.

– Do not plug the machine into an uninterruptible power

supply (UPS).

230V

Install the Drum Cartridge

Lift the scanning platform (A), and open the

cartridge cover (B) when the whirring sound

stops.

Remove the drum cartridge from the bag. Keep

the bag for storing the cartridge when the

machine needs maintenance.

Remove the shipping materials.

Remove the protective cover.

INPORTANT

Do not open the protective shutter (A) or touch the

sensors (B), electrical contacts (C), cartridge memory

(D) or imaging transfer belt (E) on the drum cartridge.

Hold the cartridge with the green handle.

Position the triangular mark on the drum

cartridge (A) with the triangular mark on the

machine (B) and install the drum cartridge.

Pull down the handle to set the cartridge in

place.

Install the Toner Cartridges

Close the cartridge cover (B) and lower the

scanning platform (A). Please wait until the

whirring sound stops.

NOTE

The carousel rotates into a new position for each

toner to be loaded.

The LCD alternates between the standby display

and the message to insert toner cartridges (Y/M/

C/K).

Press [Menu] on the operation panel.

Press [ ] or [ ] to select

<10.MAINTENANCE>, then press [OK].

Press [ ] or [ ] to select <1.CHANGE

CARTRIDGE> on the LCD, then press [OK].

Press [ ] or [ ] to select <5.ALL COLORS> on

the LCD, then press [OK].

NOTE

• If you replace an individual color, select either

YELLOW, CYAN, MAGENTA or BLACK instead of

<ALL COLORS>, then press [OK].

• If you select <5. ALL COLORS>, change the

cartridge one by one instead of removing all

cartridges.

Lift the scanning platform (A) and open the

cartridge cover until it is locked (B) when the

whirring sound stops.

Check the color marking on the cartridge

receptacle in the machine. Remove the toner

cartridge of the same color from the bag.

Keep the back for future use.

INPORTANT

To avoid damage, do not touch the development roller

(A), sensors (B), electrical contacts (C) or toner

cartridge memory (D) on a toner cartridge.

Hold the cartridge and gently shake it several

times in all directions to evenly distribute the

toner inside.

Remove the protective cover (A) by pulling on

the tab. Keep the cover for future use.

MenuMenu

[Menu]

[(/)][OK]

Hold the cartridge on a flat stable surface with

one hand, and pull out the seal completely with

the other hand.

CAUTION

If the sealing tape is pulled out forcefully or stopped at

midpoint, toner may spill. If toner gets into your eyes

or mouth, wash it away immediately and consult a

physician.

NOTE

When handling a toner cartridge, press and hold the

blue buttons properly as shown in the figure. Do not

set it vertically or upside-down.

Insert the cartridge in the machine as far as it will

go. Keep the guides (A), (B) on both sides

aligned with the grooves (C), (D) (triangular

mark) on the machine. Please note that these

arrows are just for alignment purpose and do not

represent the color of the toner.

Close the cartridge cover and wait for the

cartridge cradle to rotate and stop, and then

open the cover again. Allow approximately two

seconds for the cartridge cradle to rotate to the

next receptacle.

The receptacles appear in this order: Yellow >

Magenta > Cyan > BlacK.

Repeat steps 8 to 13 until all four toner cartridges are

installed.

NOTE

If the cartridge cover is closed during those steps and

an empty cartridge receptacle does not appear, close

the cartridge cover and lower the scanning platform.

When the whirring sound stops, try the procedure

again from step 3.

Close the cartridge cover and lower the scanning

platform. The LCD flashes <PLEASE WAIT>

until calibration is complete. Please allow a few

minutes for the machine to calibrate itself.

Load Paper

Grasp paper cassette, pull it out completely, and

set it aside.

Turn and pull out the shipping material a, and

press the inner plate bto set it on the bottom.

Pinch and slide the blue rear paper end guide to

match the size of paper.

Pinch and slide the blue side paper end guides

by both hands to match the size of paper.

Load the paper with the print side facing down

and the top of the paper to the front of the

cassette. Make sure the stack height does not

exceed the limit mark (A).

Press down the paper stack to the bottom and

make sure the side edges of the stack sit below

the hooks (A).

Insert the paper cassette back into the machine

as far as it will go.

NOTE

• If you do not completely insert the cassette into the

machine, paper jams may occur.

• If loading paper other than A4, make sure to set the

correct paper size in the machine. (See Chapter 2,

“Paper Handling,” in the User’s Guide.)

Paper limit

mark

Setting the Machine for Sending Faxes

Sender Information

The sender information you register in the machine appears in the header of each page received by

your recipient.

Entering Information

Use the following keys to enter information in the machine.

You can enter the following characters in each input mode:

●Use the numeric keys to enter characters.

Press the numeric key repeatedly until the

required character appears.

●Press [#] to enter symbols.

●Press [ ] to switch between input modes:

– [A]/[a]: Letter mode

– [1]: Number mode

●Press [ ] or [ ] to move the cursor.

●Press [OK] to confirm the entry.

●Press [Clear] to delete the character at the

cursor position, or the entire entry if held for

more than one second.

This key is attached with One-Touch Speed

Dialing keys.

31/12 2005 P.001/003

THE SLEREXE COMPANY LIMITED

SAPORS LANE•BOOLE•DORSET•BH25 8ER

TELEPHONE BOOLE (945 13) 51617 – FAX 1234567

Our Ref. 350/PJC/EAC

#0001YOUR NAME012345678917:30

Date Time User

Fax Number

User Name Session

Number

Page Number

:A :a

[1] @.-_/ @.-_/ 1

[2] ABC abc 2

[3] DEF def 3

[4] GHI ghi 4

[5] JKL jkl 5

[6] MNO mno 6

[7] PQRS pqrs 7

[8] TUV tuv 8

[9] WXYZ wxyz 9

[0] 0

[ ]

[#] – . # ! " , ; : ^ _ = / | ’ ? $ @ % & + \ ( ) [ ] { } < >

:A :a :1

MenuMenu

312

456

ABC DEF

GHI JKL MNO

PQRS TUV WXYZ

[(/)]

[OK]

[ ][ ]

Numeric keys

[Clear]

11 12 13 14 15

16 17 18

Autres manuels pour Color imageCLASS MF8180c

Table des matières

Autres manuels Canon Imprimante tout-en-un

Canon

Canon PIXMA MX392 Manuel utilisateur

Canon

Canon PIXMA MX410 Series Manuel

Canon

Canon PIXMA MG6450 Manuel utilisateur

Canon

Canon imageCLASS MF3010 VP Manuel utilisateur

Canon

Canon imagePROGRAF W6200 Manuel utilisateur

Canon

Canon PIXMA MP750 Manuel utilisateur

Canon

Canon Color imageCLASS MF8350Cdn Guide de sécurité

Canon

Canon Pixma MG2400 Series Guide de configuration

Canon

Canon PIXMA MG3220 series Manuel utilisateur

Canon

Canon imageRUNNER 2016 Series Manuel utilisateur

Canon

Canon PIXMA MP810 Manuel utilisateur

Canon

Canon Laser Class 700 Series Manuel utilisateur

Canon

Canon imageRunner 3300E Manuel utilisateur

Canon

Canon PIXMA MP970 Manuel

Canon

Canon imageRUNNER 6000 Manuel utilisateur

Canon

Canon MultiPASS F30 Manuel utilisateur

Canon

Canon PIXMA PRO-100 Series Manuel utilisateur

Canon

Canon imageRunner C5051i Manuel utilisateur

Canon

Canon PIXMA MP610 Series Manuel utilisateur

Canon

Canon MX520 series Guide de configuration

Canon

Canon MultiPASS MP360 Manuel utilisateur

Canon

Canon ImageRunner 5050 Manuel utilisateur

Canon

Canon imageCLASS D660 Manuel utilisateur

Canon

Canon PIXMA MP600 Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur