Cannon MiniPV Manuel utilisateur

CANNON® miniPV Installation Guide

Cannon Instrument Company

2139 High Tech Road • State College, PA • 16803 • USA

CANNON® miniPV Installation Guide

Cannon Instrument Company

2139 High Tech Road • State College, PA • 16803 • USA

miniPV viscometer

Installation Guide

Purpose THANK YOU for your purchase of the miniPV automatic viscometer

from Cannon Instrument Company. This guide is designed to

provide information about the installation of the miniPV. Refer to

the miniPV Instruction & Operation Manual for more information.

1.Unpack the miniPV viscometer

CAUTION Remove all components from the shipping container(s).

Do NOT lift the miniPV instrument by the modular side panels (“ears”). Always

support the weight of the unit from the BASE.

- 4 - - 1 -

•Remove all packing material from the components.

•Verify reception of shipped materials by comparing equipment items with packing/

parts lists. Report any missing items to Cannon Instrument Company

immediately.

•Inspect each component for signs of damage. Report damages to the shipper and

Cannon Instrument Company immediately.

•Retain all packing materials until the instrument is connected and functioning

properly.

•If any components must be returned to CANNON, the damaged items must be

packaged in the original shipping container. Refer to the Warranty section of the

Instruction & Operation manual for instructions on returning defective equipment.

Customers outside the United States should contact their local CANNON dealer

for return procedures.

•Review the operator safety information in the beginning of the miniPV Instruction

& Operation Manual.

•Verify electrical specifications for MAINS power in the miniPV Instruction &

Operation Manual.

2139 High Tech Road | State College, PA 16803 | USA

814-353-8000 | 800-676-6232

[email protected] | cannoninstrument.com

- 2 - - 3 -

Waste Receiver

Power Supply

Solvent

Vessel

Connect tubing and cables as indicated in the image. Cut tubing

to length as necessary.

Set the desired control

temperature.

Calibrate the instrument per

manual instructions or conrm

calibration data included with your

installation CD.

Enter sample ID information

into VISCPRO and begin running

samples.

Tubing Detail

A = 6 mm transperant tubing

B = 1/8” transperant tubing

miniPV Installation Guide | Cannon Instrument Company® | 2139 High Tech Rd | State College, PA | 16803 | USA | 814-353-8007 | fax 814-353-8007 | cannoninstrument.com

Above: Filling the miniPV series

bath vessel with bath fluid

using the provided glass funnel.

3. Fill bath vessel to the fill line with silicone fluid.

Install VISCPRO Software on the controlling PC using

the installation CD or thumb drive.

Supply power to the miniAV instrument.

Load VISCPRO software.

miniPV

Power Supply

Waste Vessel

Solvent

Vessel

Autres manuels Cannon Instrument de mesure

Cannon

Cannon Ravenfield BS/C+ Manuel utilisateur

Cannon

Cannon UltraVIS 192 Manuel utilisateur

Cannon

Cannon miniPV-X Manuel utilisateur

Cannon

Cannon CAV 4.1 Manuel d'instructions d'installation

Cannon

Cannon miniPV-HX Manuel utilisateur

Cannon

Cannon CAV-2100 Manuel utilisateur

Cannon

Cannon Densi-H Manuel utilisateur

Cannon

Cannon miniAV Series Manuel utilisateur

Cannon

Cannon SimpleVIS Manuel utilisateur

Cannon

Cannon CAV-2100 Manuel d'instructions d'installation

Cannon

Cannon D155 Manuel d'instructions d'installation

Cannon

Cannon PolyVISC SPS Manuel utilisateur

Cannon

Cannon Ravenfield BS/C+ Manuel utilisateur

Cannon

Cannon Densi-H Manuel utilisateur

Cannon

Cannon SimpleVIS Manuel utilisateur

Cannon

Cannon MiniQV-X Manuel utilisateur

Cannon

Cannon CAV 4.1 Manuel utilisateur

Cannon

Cannon CAV 4.2 Manuel utilisateur

Cannon

Cannon TE-DPV Asphalt Manuel utilisateur

Cannon

Cannon HTHS Series II Manuel d'instructions d'installation

Cannon

Cannon CAV 4.2 Manuel utilisateur

Cannon

Cannon IntelliTroll Manuel utilisateur

Cannon

Cannon CMRV-5000 Manuel d'instructions d'installation

Cannon

Cannon miniAV-LT Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

Cannon miniPV Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques