Campbell CM106K Manuel utilisateur
CM106K Tripod
Revision: 3/12
Copyright © 2011-2012
Campbell Scientific, Inc.
Warranty
“PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are
warranted by Campbell Scientific, Inc. (“Campbell”) to be free from defects in
materials and workmanship under normal use and service for twelve (12)
months from date of shipment unless otherwise specified in the corresponding
Campbell pricelist or product manual. Products not manufactured, but that are
re-sold by Campbell, are warranted only to the limits extended by the original
manufacturer. Batteries, fine-wire thermocouples, desiccant, and other
consumables have no warranty. Campbell's obligation under this warranty is
limited to repairing or replacing (at Campbell's option) defective products,
which shall be the sole and exclusive remedy under this warranty. The
customer shall assume all costs of removing, reinstalling, and shipping
defective products to Campbell. Campbell will return such products by surface
carrier prepaid within the continental United States of America. To all other
locations, Campbell will return such products best way CIP (Port of Entry)
INCOTERM® 2010, prepaid. This warranty shall not apply to any products
which have been subjected to modification, misuse, neglect, improper service,
accidents of nature, or shipping damage. This warranty is in lieu of all other
warranties, expressed or implied. The warranty for installation services
performed by Campbell such as programming to customer specifications,
electrical connections to products manufactured by Campbell, and product
specific training, is part of Campbell’s product warranty. CAMPBELL
EXPRESSLY DISCLAIMS AND EXCLUDES ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. Campbell is not liable for any special, indirect,
incidental, and/or consequential damages.”
Assistance
Products may not be returned without prior authorization. The following
contact information is for US and international customers residing in countries
served by Campbell Scientific, Inc. directly. Affiliate companies handle
repairs for customers within their territories. Please visit
www.campbellsci.com to determine which Campbell Scientific company serves
your country.
To obtain a Returned Materials Authorization (RMA), contact CAMPBELL
SCIENTIFIC, INC., phone (435) 227-9000. After an applications engineer
determines the nature of the problem, an RMA number will be issued. Please
write this number clearly on the outside of the shipping container. Campbell
Scientific's shipping address is:
CAMPBELL SCIENTIFIC, INC.
RMA#_____
815 West 1800 North
Logan, Utah 84321-1784
For all returns, the customer must fill out a "Statement of Product Cleanliness
and Decontamination" form and comply with the requirements specified in it.
The form is available from our web site at www.campbellsci.com/repair. A
completed form must be either emailed to repair@campbellsci.com or faxed to
(435) 227-9106. Campbell Scientific is unable to process any returns until we
receive this form. If the form is not received within three days of product
receipt or is incomplete, the product will be returned to the customer at the
customer's expense. Campbell Scientific reserves the right to refuse service on
products that were exposed to contaminants that may cause health or safety
concerns for our employees.
CM106K Table of Contents
PDF viewers: These page numbers refer to the printed version of this document. Use the
PDF reader bookmarks tab for links to specific sections.
1. Cautionary Statements................................................1
1.1 Site Selection ............................................................................................1
1.2 Tripod Mounting.......................................................................................1
1.3 Tripod Installation ....................................................................................1
2. Tripod Installation........................................................2
2.1 Tripod Base Assembly..............................................................................2
2.1.1 Parts List .........................................................................................2
2.1.2 Leg Assembly .................................................................................3
2.2 Tripod Base Positioning ...........................................................................6
2.2.1 Mounting on a Relatively Flat Area................................................7
2.2.2 Mounting on an Incline...................................................................7
2.3 Mast ..........................................................................................................8
2.4 Installing the Optional Guy Kit ................................................................9
2.5 Staking the Tripod Feet ..........................................................................11
2.6 Tripod Grounding ...................................................................................12
2.7 Crossarm Attachment .............................................................................14
2.8 Enclosure Attachment.............................................................................14
2.8.1 Enclosure Mounting to Tripod Mast.............................................14
2.8.2 Enclosure Mounting to Tripod Leg...............................................15
3. General .......................................................................17
4. Specifications ............................................................18
5. Tools List (for tripod, mast, enclosures, and
crossarms) ...............................................................18
6. Tripod Components...................................................19
7. Mounting Brackets ....................................................19
7.1 CM210 Crossarm Mounting Kit.............................................................19
7.2 CM216 Mast Mounting Kit ....................................................................20
7.3 CM220 Right Angle Mounting Kit.........................................................21
7.4 CM225 and 18098 Pyranometer Mounting Stand ..................................22
7.5 CM230 Adjustable Angle Mounting Kit ................................................23
7.6 CM235 Magnetic Mounting Stand .........................................................24
7.7 RM Young Gill Radiation Shields..........................................................25
i
CM106K Table of Contents
ii
Figures
2-1. Tripod component dimensions ............................................................... 3
2-2. Comparison of one leg pointing downhill (right) versus two legs
pointing downhill ................................................................................ 7
2-3. Guy collar ............................................................................................... 9
2-4. Anchor attachment................................................................................ 10
2-5. Staking the tripod feet........................................................................... 11
2-6. Ground rod and clamp .......................................................................... 12
2-7. Lightning rod and tripod grounding lug ............................................... 13
2-8. CM204 Crossarm.................................................................................. 14
2-9. Enclosure with the –MM Bracket......................................................... 15
2-10. Enclosure with the –LM Bracket........................................................ 16
3-1. Typical tripod-based weather station.................................................... 17
7-1. CM210 Crossarm Mounting Kit (shown with user-supplied pipe) ...... 19
7-2. CM216 Mast Mounting Kit .................................................................. 20
7-3. CM220 Right Angle Mounting Kit....................................................... 21
7-4. CM225 Pyranometer Mounting Stand.................................................. 22
7-5. CM230 Adjustable Angle Mounting Kit .............................................. 23
7-6. CM235 Magnetic Mounting Stand ....................................................... 24
7-7. RM Young Gill Radiation Shield ......................................................... 25
CM106K Tripod
1. Cautionary Statements
1.1 Site Selection
•Select a safe site to install the tripod.
•The distance between any power lines and the installation site should be at
least one and one-half times the height of the tripod. Make the distance
even greater, if at all possible. Since all overhead power lines look
somewhat alike, consider them all dangerous and stay well away from
them.
•If you have power lines or buried utilities in the area, call your local utility
providers for assistance.
1.2 Tripod Mounting
•NEVER work alone; always have someone near who can summon help.
•Certain clothing may provide a degree of safety, but don't depend on it for
your life (rubber boots or shoes, industrial rubber gloves and a long sleeve
shirt or jacket).
•Check weather conditions. Be sure that it hasn't rained recently and that
the ground is not wet or muddy. Make sure that rain or thunderstorms are
not predicted for the day you decide to install the tripod.
•The wind can blow the tripod into a nearby power line. Don't install or
remove tripods in moderate or heavy winds.
•If you need to use a ladder, make sure it is made of non-conductive (non-
metallic) material. (This is a safety rule that you should follow whenever
you're working with electrical equipment.)
•If possible, have someone present who has been trained in electric shock
first aid.
1.3 Tripod Installation
•Properly assemble the tripod according to instructions (do this where the
tripod is to be put up).
•Once the tripod is up in full vertical position, securely fasten it to the
ground using ground spikes. For situations where soil structure is
questionable or the tripod may experience high wind loads, concrete
footings for the tripod feet and guy anchors should be considered.
•Ground the tripod according to the National Electrical Code.
1
CM106K Tripod
2. Tripod Installation
2.1 Tripod Base Assembly
2.1.1 Parts List
Part # Description Qty
10838 Tripod Foot 3
27392 CM106K Body 3
19308 Spacer 6
4366 5/16” Lock Washer 6
19175 5/16-18x2.25” Bolt 6
18126 5/16-18 Bronze Nut 6
19031 Grounding Clamp 2
27113 #10-32 x 0.75” Bolt 4
1201 Clamp Bracket 3
75 5/16-18 x 0.75” Bolt 3
795 ¼-20 Nylock Nut 6
794 ¼-20 x 1.75” Bolt 12
850 CM10 Lightning Rod 1
17589 Lightning Rod Clamp Assembly 1
2
CM106K Tripod
2.1.2 Leg Assembly
1. Refer to Figure 2-1 to create the following parts:
•Three (3) Leg Braces
•Three (3) Legs
•One (1) Mast
Leg B
r
ace (3
r
equi
r
ed)
Mast (1 required)
Leg (3 required)
Leg Brace
Leg
Mast
Material
3/4 NPS SCH40
[DN 20 mm]
3/4 NPS SCH40
[DN 20 mm]
11/2NPSSCH40
[DN 40 mm]
Wall Thickness
0.113”
[2.87 mm]
0.113”
[2.87 mm]
0.145”
[3.683 mm]
Length
48.0”
[121.9 cm]
72.0”
[182.9 cm]
100.0”
[254 cm]
QTY
3
3
1
20.00 [50.8 cm]
Optional for Guy Kit
Mast and mast legs must be made of Steel
(Minimum yield Strength of 36 ksi [248 MPa])
FIGURE 2-1. Tripod component dimensions
3
CM106K Tripod
2. Using a ¼-20 x 1.75” bolt and ½-20 nylock nut, attach a foot to each
tripod leg (Figure 2-2).
Leg
1/4-20 x 1.75” Bolt 1/4-20 Nylock Nut
Foot
3. Slide a clamp bracket onto each leg. Thread a 5/16-18 x 0.75” bolt into the
bracket, leaving the bracket free to move. Attach a leg brace to each clamp
bracket using a ¼-20 x 1.75” bolt and nylock nut.
5/16-18 x 0.75” Bolt
1/4-20 x 1.75” Bolt
1/4-20 Nylock Nut
Clamp Bracket
Leg
Leg Brace
4
Table des matières
Autres manuels Campbell Accessoires pour appareils photo
Campbell
Campbell CM110 Manuel utilisateur
Campbell
Campbell 30066 Manuel du propriétaire
Campbell
Campbell CM110 Manuel utilisateur
Campbell
Campbell CM110 Manuel utilisateur
Campbell
Campbell CM106B Manuel utilisateur
Campbell
Campbell CM10K Manuel utilisateur
Campbell
Campbell CM110 Manuel utilisateur
Campbell
Campbell CM110 Manuel utilisateur
Campbell
Campbell CM106B Manuel utilisateur
Campbell
Campbell CM106 Manuel utilisateur
