turn on video & images
10
System Settings
Here you can perform the main settings.
Languages: Choose between German, English, French, Spanish, Italian, Dutch,
Norwegian or Russian
Date: Year-Month-Day. Switch through menu using the M-Button
Time: Hour:Minute. Switch through menu using the M-Button
Auto Screen Off: Screen will be switched off to save battery: Off, 30, 60 or 120 Sec.
Auto Power Off: Select the Auto off function: Off, 60 Sec., 120 Sec. or 300 Sec.
Motion detection: Off, low, medium or high
Flip picture: Off or ipped by 180°
Image mirroring: Off or mirrored
Light Frequency: Before you start recording indoors, make sure to set the correct
Hz-frequency of your electricity grid:
Europe, Asia and Australia – 50 Hz
America – 60 Hz
Japan – 50 or 60 Hz (depending on the area)
Video System: NTSC or PAL
OSD: Display icons ON or OFF
Status LED: Switch front LEDs On or Off
Card formatting: Slot 1 or Slot 2 (All recorded data will be deleted!)
Factory setting: Resets the camera
Firmware: Information about current rmware and update
! Please note that some functions are only available after a rmware/software update.
Using the DiveBox and different Mounts
Put the camera into the front side of the DiveBox at rst and lock it. Please make sure that the
fastener of the box is properly locked. The cam can still be operated though the buttons. The
rubber seal has to be clean and undamaged. Please also make sure that the camera lens and
the interior of the DiveBox are clean as well. A high air moisture can condense on the interior
side of the lens. Use anti-mist pads to reduce or avoid that.
! When using the bike or helmet mount, please make sure that the adjusting screws are
xed tightly. Mounts that use the adhesive pads must have a clean and non- lipid surface.
