CammSys BlackSys CW-100 Manuel utilisateur
User’s Manual
2Notice
This product helps you to use the recorded video as a reference in case of car accident.
The recorded video by this product carries no legal binding force. CammSys will not be responsible for any legal conict and damage caused by
recorded or non-recorded video.
fFor the safety, do not operate the product during driving or stare at the product. Such action may result a car accident.
fOn an accident with the impact lower than certain degree of acceleration, please be aware that the event data may
not be recorded in the product.(however it is recorded as a Normal le)
fRecording may not be executed in case the product is defect caused by car accident or other reason.
fRecording can be distorted under the condition where brightness suddenly changes like passing through a tunnel,
Direct sunlight reection during the day time or where light is not available at night time.
fAll right to hardware, software and relevant data are reserved by CammSys Corp. and protected under copyright
Law. In case of illegal copy and process, not only civil compensation but criminal punishment based on protection of
intellectual property rights can be engaged.
fDo not use the product for other purpose rather than Car Black box. CammSys will not be held responsible for
damage caused by negligence, careless and improper management of user.
Recommended System for PCViewer
● OS: Window XP(32bit), Windows Vista(32bit), Windows7(32/64bit)
● CPU: Pentium 4/ 2,8Ghz or higher
● Memory: RAM 1G or higher
● HDD: 4GB / Directx 9.0 or higher
● Microsoft Intenet Explorer 7 or higher
Notice
3
Caution
Before use the product, check if operation and video recording goes well.
Installation and Management
fKeep clean the camera lens by preventing dust or foreign substance from getting in the lens part. Otherwise, it
may result in video distortion. If another object is placed around, it can be reected from the window. So do not put
another object around the installed product.
fIf installation location of the product is changed, it may not record properly even if it worked after initial installation.
Therefore, install the product rmly and do not give an excessive shock or force to move the product.
fLong time use of product or in case of severe vibration by driving unpaved road, changed angle or location of
product may cause malfunctioning. Correct the angle or location of product properly in a at road after pull over to
the side of the road.
fDo not disassemble or remodel this product as it can cause an accident due to malfunctioning and such action will
Result in the product being unt for use and void all warranty/service provisions.
fDo not use chemicals or detergents to clean the product. This can result in malfunctioning of the product.
fNever give an excessive shock to or inject a foreign substance into the product. Give an excessive force or shock or
injecting a foreign substance into this product can cause a trouble.
Caution
4Caution
SD Card Use
Be sure to turn OFF the power and LED is OFF before removing or
inserting the SD card. Removing the SD card while product is in use,
it can cause malfunctioning.
fUse the authorized SD card which a manufacturer/
distributor provided. If authorized SD card is not used,
it can cause malfunctioning and loss of recorded Data.
fDo not disassemble or remodel this product. It can
cause malfunctioning and service is not available.
fSD card is expendable supply. After long period of use,
it may not able to record data correctly. Please change
the SD card To the new one.
fBack up the important data in other storage devices
such as HDD,CD, USB. Data can be lost and damaged
if data is kept in SD card for a long time.
fCheck the recorded data of SD card in a regular basis
to make sure the recording is working well.
Power
fThis product is designed to use cigar jack power. In
case of using the power from the vehicle, consult it with
dealer in shop and any damage caused by the user’s
misuse, be noted that it’s user’s fault and manufacturer
is not responsible for any case.
fUse the authorized cigar cable contained in the product
box. Avoid connection of power supply without
knowledge and experience. Any damage caused by
user’s misuse, be noted that it’s user’s fault and
manufacturer is not responsible for any case
fDo not remove or insert SD card while power is turned
on, it can cause serious error of the product. Make
sure to turn OFF the power and LED is OFF before
removing or inserting the SD card. Removing the SD
card while product is in use it can cause damage of
video le.
5
How to format
PC format
Check the virus and format the SD card in a regular basis (twice a
month at least ) to avoid disadvantage caused by storage error such
as non-recording and abnormal recording.
How to format
1. Insert or connect SD card to PC.
2. Click [Start] ➝[My Computer].
3. Place mouse pointer in [Portable USB drive] SD card and
click the right button of mouse. then click the [Format].
4. Once click the [Start] button, format is started.
Notice
● AT16/32 format is required if SD card recognition and record
error happen.
● Change SD card if PC doesn’t recognize SD card or format is not
able to be completed.
●If SD card contains other data, it can cause malfunctioning.
Therefore, please remove it.
Caution
ÚAs SD card is expendable supply, manufacturer is not responsible
for any data loss and damage. Also, manufacturer cannot
guarantee the recorded Normal/EVENT data on SD card.
Manual format
Manual format is available without PC.
How to format
1. Turn off the power.
2. Press Event [▲] button deeply and turn on the power
simultaneously.
3. Format is started after 5 sec. with buzzer sound and
LED off.
4. Once format is completed, it starts rebutting
automatically.
Caution
ÚKeep press the event button until format is started.
How to format
6Table of contents
Table of contents
Notice 2
Caution 3
Installation and Management 3
SD Card Use 4
Power 4
How to format 5
PC format 5
Manual format 5
Details on Video Record 7
Main features 8
Name of the components 9
Main components 9
Optional components 9
Front 10
Rear 10
Left Side 11
Right Side 11
Installation 12
LED and Buzzer 14
Function 14
Error 15
PC Viewer Installation 16
How to install PC Viewer 16
How to uninstall PC Viewer 17
PC Viewer Layout 18
PC Viewer Conguration 20
How to update rmware 21
Technical Specication 22
Customer Service 23
Before applying for Service 24
Product Warranty 25
7
Details on Video Record
Normal Recording
Video Record starts when vehicle power is turned on and
recorded data are stored in SD card(“REC” folder).
Parking Mode Recording
f10 minutes after parking or stopping the car, if no
motion is detected, it converts to Parking mode
recording automatically.(In case of product is con-
nected with a car battery or extra power supply)
fIf motion is detected consistently and driving is
resuming, it converts Normal recording again.
fWhen it detects impact during Parking mode, the video
le is stored in “EVENT” folder.(Long period of
parking may cause discharge of a car battery.)
Last Scene Recording
Though power supply is disconnected caused by accident
or manually, last scene is recorded and stored in EVENT
folder by using built-in super capacity battery.
EVENT Recording
If Acceleration sensor(G-Sensor) detects impact, sudden
unintended acceleration and quick braking or manually
pressing the event button during the car runs, it records 20
sec. of video to the “EVENT” folder(10 sec. before and
after the EVENT).
Notice
● The less G-Sensor gure, the less shock sensitivity.
(Initial settings come with 3 level. 1 is insensitive, 3 is medium,
6 is sensitive)
Details on Video Record
Caution
ÚIf power is disconnected within 2 min. after power is on, recorded le can be broken.
8Main features
Icon Features
The feature providing clear images under
back light circumstances
Wide angle of view(120°) makes
seamless recording(30fps)
Event recording starts when impact
happen and records 10 sec. before and
after impact
Built-in Super Capacitor keeps recording
for 5 sec. even when power supply is
disconnected
Normal recording(720 x 480 resolution,
D1) continues Max 30fps
Playback the video les through PC
viewer(for Windows)
Clear voice recording
Buzzer indicates operation status and
alarms an Error
Icon Features
Parking mode recording
(In case of being powered)
LED Indicator for surveillance
Video review by connecting to navigation
system
Emergency Recording
Zoom in through PC viewer
Manual Format
GPS(option) module
Video out(option) cable
Main features
9
Name of the components
Main components
Adepter
Lock
Main unit User’s manual Cable holder Micro SD Card Cigar jack cable
Optional components
G
P
S
External GPS module A/V Out cable
Name of the components
10 Name of the components
Front
Buzzer
Camera Lens
For video recording
Surveillance LED
LED indicator for parking
or video recording
Rear
MIC
Voice recording
Event button
For manual recording
REC, GPS LED
LED indicator for error
or REC/GPS is running
(Refer to page 12~13
regarding LED indicator)
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels CammSys Caméra embarquée
