Callaway Micro Pro Manuel utilisateur

A. Eye Piece

B. Diopter Adjustment

C. Power Button

D. Mode Button

E. Slope Button

F. Charging Port

LCD DISPLAY

A. Zero-In Aiming Square

B. Laser Indicator

C. P.A.T. Mode Indicator

D. Pulse Indicator

E. Distance

F. Unit of Measure

G. Angle of Incline/Decline

H. Slope Adjusted Distance

RANGEFINDER DIAGRAM

CALLAWAY MICRO PRO

LASER RANGEFINDER MANUAL

4. Unit of Measure - To change the unit of measure from Yards

to Meters, start with the device powered o󰀨. Then HOLD the

Mode Button for 3 sec. The unit of measure is indicated by a

“Y” or “M” shown directly to the right of the distance displayed.

SLOPE FUNCTION

To turn Slope on/o󰀨, press the “S” button on the top of the unit

1. If GREEN is ashing: Slope function is o󰀨. The Laser is

tournament legal when the slope is turned o󰀨.

2. If RED is ashing: Slope function is enabled. Slope adjusted

yardage will be displayed after every time the laser is red.

The Laser is not tournament legal when the slope is enabled.

SLOPE ON SLOPE OFF

CHARGING

FOR MORE SUPPORT VISIT:

www.CallawayDMD.com/product-support

Caution: Use of controls or adjustments or performance of

procedures other than those specied herein may result in

hazardous radiation exposure.

1. Insert the USB-C charger end into the Micro Pro & then insert

the USB end of the charging cord into a USB charging port or

AC adapter (not included). The recommended USB charging

rate is 5V, 1A.

2. A complete full charge will take about 6 hours. the indicator

light will turn green when charging is completed.

3. A full charge should last 100+ rounds of golf

Front indicator

lights:

2.P.A.T. with Pulse Technology - P.A.T. Mode is best used

when measuring the distance to a Flagstick or smaller objects.

Device will provide a short vibration to conrm that the laser

has locked on to the pin. To toggle between Standard and

P.A.T Mode, quickly PRESS the Mode Button once while

device is powered on. When P.A.T. Mode is activated, the

agstick icon will appear on the right side and the Pulse icon

will appear on the left of the LCD display (Fig. B).

MEASUREMENT MODES

1. Standard - Standard Mode is recommended when

measuring distances to larger objects. (Fig. A)

3. Scanning - To measure distances to multiple targets in

succession, PRESS and RELEASE Power Button to power

on. Then HOLD Power Button, the Laser Indicator will ash

and the laser will continuously re. Measurements will change

as you scan the landscape and change targets. This mode will

continuously re the laser for 3 seconds & the laser will lock on

to the closest distance during the ring period.

HOW TO USE

While looking through the

Eye Piece, PRESS &

RELEASE the Power

Button.The rangender

is now powered on.

To focus/increase

clarity, use the Diopter

Adjustment by turning

the Eye Piece.

Continue looking through

the Eye Piece, aim the

Zero-In Aiming Square at

your intended target &

PRESS the Power Button.

The laser will re and the

Laser Indicator will appear

to the left of the Zero-In Aiming

Square.The measurement will be

displayed at the top of the LCD display.

NOTE: While scanning in P.A.T. Mode, the measurement will only

change when a shorter distance is measured. This is useful when

measuring the distance to a agstick when there are trees or other

objects in the background.

Autres manuels pour Micro Pro

Table des matières

Autres manuels Callaway Instrument de mesure

Callaway

Callaway 250+ Manuel utilisateur

Callaway

Callaway XLS Manuel utilisateur

Callaway

Callaway LS Manuel utilisateur

Callaway

Callaway ProXS Manuel utilisateur

Callaway

Callaway TOUR-S Manuel utilisateur

Callaway

Callaway 350TL Manuel utilisateur

Callaway

Callaway Micro Manuel utilisateur

Callaway

Callaway 300 PRO Manuel utilisateur

Callaway

Callaway 200 S Manuel utilisateur

Callaway

Callaway 350TL Manuel utilisateur

Callaway

Callaway 300 Manuel utilisateur

Callaway

Callaway EZ Manuel utilisateur

Callaway

Callaway 200 S Manuel utilisateur

Callaway

Callaway Hybrid Manuel utilisateur

Callaway

Callaway CSi PRO Manuel utilisateur

Callaway

Callaway 300 PRO Manuel utilisateur

Callaway

Callaway LS Manuel utilisateur

Callaway

Callaway CSi PRO Manuel utilisateur

Callaway

Callaway XLS Manuel utilisateur

Callaway

Callaway Micro Pro Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur