CALIENT S Series Manuel utilisateur
CALIENT Optical Circuit Switch (OCS)
WebGUI Quick Start Guide
CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 2 of 63
© 2015 CALIENT Technologies, Inc. All rights reserved.
CALIENT, CALIENT Technologies, the CALIENT design logo, and the tag line “Move the light,
not
the fiber”are registered trademarks of CALIENT Technologies, Inc. in the U.S. and other
countries. All other marks belong to their respective owners.
Confidential and Proprietary Information
This document contains confidential and proprietary information of CALIENT Technologies,
which is protected by the copyright laws of the United States, international copyright treaties,
and all other applicable national laws. Any unauthorized use, reproduction, or transfer of
any information in this document is strictly prohibited. This document contains information
regarding technology that is protected under one or more pending or issued United States
and foreign patents. This manual may not be copied wholly or in part without prior written
permission from CALIENT Technologies. To obtain such permission, please contact:
CALIENT Technologies
25 Castilian Drive
Goleta, CA 93117 USA
Phone: +1.805.562.5500
www.calient.net
Service and Support
CALIENT offers a wide range of product support programs including installation support, repair
services, maintenance services and technical training.
If you need technical assistance with CALIENT’s products, please visit our automated customer
If you are experiencing a service-affecting emergency, please contact us on the following
numbers:
Within US: 1.877.682.1160
International: International Call Prefix + Country Code + 1.877.682.1160
If your call is not answered immediately, please leave a message. Messages are retrieved
continuously.
Document Part Number: 460185-00, Rev. 0.2
CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 3 of 63
Revision History
Date
Version
Description
Author(s)
04/08/2013
—
Legacy documentation
T. Douglas
07/13/2015
0.1
Update with latest WebGUI info; implement
new user doc formatting
T. Schilz
07/28/2015
0.2
Incorporate VT’s review input
T. Schilz
CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 4 of 63
Table of Contents
1INTRODUCTION.......................................................................................................................... 8
2LOGGING IN ............................................................................................................................... 9
3HOME PAGE............................................................................................................................. 10
3.1 Home > Alarms/Events................................................................................................... 10
3.2 Home > Change Password .............................................................................................. 12
4NODE > SUMMARY .................................................................................................................. 14
4.1 Node > Summary > Node Config .................................................................................... 14
4.1.1 Node Configuration Sections ................................................................................... 14
4.1.1.1 General and Service Configuration ............................................................... 15
4.1.1.2 Network, SCP Server and Cross Connects Configuration.............................. 16
4.1.1.3 Time, Security and Dynamic Update Configuration...................................... 17
4.1.2 Node > Summary > Node Config > Backup/Restore................................................ 18
4.1.3 Node > Summary > Node Config > SNMP Configuration......................................... 20
4.1.3.1 SNMP v1/v2c Get/Set Parameters ................................................................ 20
4.1.3.2 SNMP Trap v1/v2c Parameters ..................................................................... 20
4.1.3.3 SNMP v3 Get/Set Parameters ....................................................................... 22
4.1.3.4 SNMP Trap v3 Parameters ............................................................................ 23
4.1.4 Node > Summary > Node Config > OpenFlow ......................................................... 25
4.2 Node > Summary > Alarm Config ................................................................................... 26
4.3 Node > Summary > Software Management................................................................... 27
4.4 Node > Summary > System Management...................................................................... 28
4.5 Node > Summary > Session Management ..................................................................... 29
4.6 Node > Summary > User Management .......................................................................... 31
4.6.1 Creating a New User ................................................................................................ 31
4.6.2 Modifying a User...................................................................................................... 33
4.6.3 Enabling, Disabling or Deleting a User..................................................................... 34
5SYSTEM INFORMATION ........................................................................................................... 36
5.1 System Info > Boards Detail............................................................................................ 36
CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 5 of 63
5.2 System Info > Ports Detail .............................................................................................. 37
5.3 System Info > Connections Detail................................................................................... 38
6CROSS CONNECTS.................................................................................................................... 39
6.1 Cross Connects > Add ..................................................................................................... 39
6.1.1 Cross Connects > Add > Cross Connect Details ....................................................... 42
6.2 Cross Connects > Summary ............................................................................................ 45
6.2.1 Cross Connects > Summary > Cross Connection Details ......................................... 47
6.3 Cross Connects > Save/Recall......................................................................................... 49
7PORTS....................................................................................................................................... 51
7.1 Ports > Summary ............................................................................................................ 51
7.1.1 Ports > Summary > Port Details ............................................................................... 52
8PORTS GROUP.......................................................................................................................... 55
8.1 Ports Group > Add .......................................................................................................... 55
8.2 Ports Group > Summary ................................................................................................. 57
9INDEPENDENT ALIASES............................................................................................................ 60
9.1 Configuring the System for Aliases................................................................................. 60
9.2 Setting Aliases from Ports > Summary ........................................................................... 60
9.3 Setting Aliases from Cross Connects > Add.................................................................... 61
CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 6 of 63
List of Figures
Figure 1 –Active Alarm Summary (Critical Alarms)...................................................................... 11
Figure 2 –Active Alarm Summary (All Alarms/Events)................................................................. 11
Figure 3 –Configuring SNMP v1/v2c Get/Set Parameters ........................................................... 20
Figure 4 –Configuring SNMP v3 Get/Set Parameters .................................................................. 23
Figure 5 –Configuring SNMP v3 Trap Parameters ....................................................................... 24
List of Tables
Table 1 –SNMP v1/v2c Get/Set Parameters ................................................................................ 20
Table 2 –SNMP v1/v2c Trap Parameters ..................................................................................... 21
Table 3 –SNMP v3 Get/Set Parameters ....................................................................................... 22
Table 4 –SNMP v3 Trap Parameters ............................................................................................ 24
CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 7 of 63
PREFACE
The CALIENT Optical Circuit Switch (OCS) WebGUI Quick Start Guide provides basic information
on how to manage CALIENT’s S320 and S160 switches over the Web using a graphical user
interface (GUI).
AUDIENCE
This guide is written for the network operations center and field service personnel who
configure, provision, and monitor the equipment. It is assumed that this audience is familiar
with the fundamental features of WebGUI technology and their use managing networked
computing systems.
CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 8 of 63
1INTRODUCTION
CALIENT’s WebGUI provides an effective, user-friendly tool for managing one or multiple
switches across the Web. The WebGUI enables system administrators to easily monitor and
manage a variety system components and functionality, including:
Alarms and events
System password changes
Node configuration
Software, session and user management
Cross-connect and port management
CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 9 of 63
2LOGGING IN
The following procedure describes how to access the WebGUI:
1. Type the IP address of the OCS in your Web browser.
2. Press Enter on your keyboard to launch the WebGUI. The Login page will appear.
3. Type the default user name (admin) and password (pxc***) in the User Name and
Password fields on the Login page.
4. Click the Login button. The WebGUI Home page will appear.
CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 10 of 63
3HOME PAGE
The WebGUI Home page is the gateway to key operational information and various tools for
monitoring and managing the OCS.
Upon opening, the page provides a quick snapshot of system information including the switch’s
IP address, a list of Critical, Major and Minor alarms, and a scrolling banner at the bottom of the
page displaying current activity on the switch.
Access to detailed operational data and assorted administrative tools is provided via buttons in
the upper-right corner of the page and a navigation menu at the left of the page.
3.1 Home > Alarms/Events
A list of all current alarms is displayed in the bottom-left corner of the Home page. Clicking
any of the alarm categories shown opens the Active Alarm Summary window (Figure 1), which
provides a detailed summary of all the alarms belonging to the selected category. Similarly,
clicking the Alarms/Events button in the upper-right corner of the page (Figure 2) displays a
summary of all active alarms for the switch.
Current switch activity
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels CALIENT Changer
