Revised October 2021
1
Hampel, W194 N11551 McCormick Drive, Germantown, WI 53022
Phone: 262-255-4540 Fax:262-255-9731
CH-3220B-1 & CH-3220-3L
Hutch Mount Bottle Holder Kit
Assembly Instructions for Installation
Calf-Tel 2 Qt. Hutch Mount Bottle Holder Kit Bill of Material:
2 Qt. Bottle Holder Wire Cradle
Hardware Required for Assembly
Calf-Tel 3 Qt. Hutch Mount Bottle Holder Kit Bill of Material:
3 Qt. Bottle Holder Wire Cradle
Hardware Required for Assembly
Installation Instructions:
Step 1: Cut Bottle Holder Opening: Using
the template on page 2, cut opening for bottle
holder and drill holes for bottle holder wires.
Step 2: Attach Bottle Holder Wire to
Plastic Face Plate: Insert bottle holder wire
through holes in bottle holder. Align plastic
face plate with opening in hutch and insert
bottle holder wire into holes on hutch.
Step 3: Secure Bottle Holder and Face
Plate to Hutch: Fasten bottle holder and
face plate to hutch with 1 screw, 1 washer
Tools Needed:
1. Router, Roto-zip or Jig Saw
2. Screw Driver/Drill
