Calculated Industries 4325 Manuel utilisateur
Pocket Reference Guide
➡
➡
Insert This
Direction
CONSTRUCTION MASTER ®
HEAVYCALC ™PRO
ADVANCED FEET-INCH-FRACTION CALCULATOR
Model 4325
Designed for today’s excavation and heavy
construction professional, the all-new
HeavyCalc Pro adds even more power to
the already powerful Construction Master
line-up. Like earlier models, this calculator is
so simple to use, even the novice user can
easily solve dimension-related problems.
•Solve Dimensional Math with Ease
•Dimensional Conversions
•Imperial/Metric Conversions
•Weight/Volume Conversions
•Rectangular Area/Volume Calculations
• Determine % Grade and Slope
• Solve Cut and Fill
• Find Bank, Loose and Compact
Volumes
•Instant Square-Up (Diagonal) Solutions
•Drop Distance Calculations
• Calculating Averages
•Material Estimations
•Paperless Tape
HEAVYCALC™PRO
GETTING STARTED ...................................1
KEY DEFINITIONS ..................................1
Basic Function Keys..............................1
Unit Keys ...............................................2
Length, Width and Height Keys.............3
Construction Project Keys .....................3
Excavation/Volume Keys .......................4
Miscellaneous Functions .......................6
PREFERENCE SETTINGS .....................8
ENTERING DIMENSIONS ....................10
Linear Dimensions...............................10
Square and Cubic Dimensions............10
CONVERSIONS.....................................11
Linear Conversions..............................11
Square and Cubic Conversions...........11
Weight Conversions.............................12
Weight per Volume Conversions .........12
Converting D:M:S ................................12
BASIC MATH OPERATIONS.................13
Adding and Subtracting Strings
of Dimensions....................................13
Multiplying Dimensions........................13
Dividing Dimensions ............................14
PERCENTAGE CALCULATIONS ..........14
MEMORY OPERATION.........................15
Using M+ .............................................15
Using Memory Storage
Keys (M1 - M3)..................................16
PAPERLESS TAPE................................17
USING THE HEAVYCALC PRO ...............18
LENGTH, WIDTH, AND HEIGHT KEYS......18
Using Multi-Function WKey to find
Area, Square-Up and Perimeter........18
Using Multi-Function hKey to find
Volume, Wall Area and Room Area .......18
VOLUME CALCULATIONS ...................19
TABLE OF CONTENTS
Simple Concrete Volume .....................19
Topsoil Volume.....................................20
Complex Concrete Volume..................21
Trench Volume.....................................23
RIGHT TRIANGLE PROBLEMS............24
Squaring-Up a Concrete Slab .............25
Finding Lot Width.................................26
Finding Drop or Fall.............................26
Finding Slope Ratio/Percent Grade.......28
Drop of Sloped Slab ............................29
Drop of Retaining Wall..........................30
CALCULATING LOADS.........................31
BASIC CUT/FILL SOLUTIONS..............32
Finding Cut or Fill – Exercise 1 ...........32
Finding Cut or Fill – Exercise 2 ...........33
Cubic Yards of Cut/Fill –
Grid Cell Method ...............................34
SHRINK AND SWELL SOLUTIONS —
MATERIAL VOLUME...........................35
Finding Loose Volume.........................36
Finding Trucked Volume/Weight –
Both Swell and Shrink Factors ..........37
APPENDIX.................................................39
Setting Fractional Resolution...............39
Default Settings ...................................40
Auto Shut-Off .......................................40
Accuracy/Errors ...................................41
Battery .................................................42
Replacing the Battery ..........................42
Reset ...................................................42
AREA AND VOLUME FORMULAS ..........43
Area Formulas .....................................43
Surface Area and Volume Formulas....44
REPAIR AND RETURN .............................45
Warranty, Repair and Return
Information.........................................45
WARRANTY ..............................................46
FCC CLASS B...........................................48
LOOKING FOR NEW IDEAS ....................48
POCKET REFERENCE GUIDE — 1
KEY DEFINITIONS
Basic Function Keys
+-x Arithmetic operation keys.
÷=
%Four-function (+, –, x, ÷)
percent key.
0– 9Keys used for entering
and •numbers.
OOff Key — Turns all power
off, clearing all non-perma-
nent registers.
oOn/Clear Key — Turns on
power. Pressing once clears
the display. Pressing twice
clears all temporary values.
ÇConvert Key — Used with
the dimensional keys to
convert between dimen-
sions or with other keys to
access special functions.
SStore Key — Used for stor-
ing values.
®Recall Key — Recalls
stored values.
GETTING STARTED
POCKET REFERENCE GUIDE — 2
Unit Keys
yYards Key — Enters or
converts to Yards.
fFeet Key — Enters or con-
verts to Feet as whole or
decimal numbers. Also
used with the iand /
keys for entering Feet-Inch
values (e.g., 6f9
i1/2). Repeated
presses during conversions
toggle between Fractional
and Decimal Feet.
iInch Key — Enters or con-
verts to Inches. Entry can
be whole or decimal num-
bers. Also used with the /
key for entering fractional
Inch values (e.g., 9i
1/2). Repeated press-
es during conversions tog-
gle between Fractional and
Decimal Inches.
/Fraction Bar Key — Used
to enter Fractions. Fractions
can be entered as proper
(1/2, 1/8, 1/16) or improper
(3/2, 9/8). If the denomina-
tor (bottom) is not entered,
the calculator's fractional
accuracy setting is auto-
matically used.
mMeters Key — Enters or
converts to Meters.
POCKET REFERENCE GUIDE — 3
Ç7 Centimeters (cm) — Enters
or converts to Centimeters.
Ç9 Millimeters (mm) — Enters
or converts to Millimeters.
Ç2 Acres (Acre) — Enters or
converts to Acres.
Length, Width and Height Keys
lEnters Length for calculation
of Area or Volume.
WEnters Width and calculates
Area, Square-up and
perimeter.
hEnters Height and calculates
Volume, wall Area and total
room Area. Calculates Height
(Depth) based on entered
Width and Slope or Percent
Grade. This is a permanent
entry; stored value holds
when turned off.
Construction Project Keys
ÍSlope — Enters or calcu-
lates a slope ratio or slope
angle. Calculates based on
entered Width and Height
(Depth).
ÇÍ Percent Grade (%Grade) —
Used to enter or solve Percent
Grade. Calculates Percent
Grade based on entered
Width and Height (Depth) or
Slope.
POCKET REFERENCE GUIDE — 4
sSquare-Up Key —
Calculates the “Square-up”
(diagonal) Length given
entered Length and Width
values.
dDrop Key — Calculates
total drop (or fall) over an
entered Length given
entered percentage drop,
Inch per Foot drop, or
degrees of drop. Continued
presses will act as a “con-
stant add,” for displaying
successive drops.
Excavation/Volume Keys
¬Loads Key — Calculates
number of loads for a given
Volume or Length, Width,
and Height (Depth) values
and stored load size.
S¬ Load Size — Stores load
size. Load size must be
entered as a cubic value
(e.g., 8yyy
S¬). The default size
is 8 cubic Yards.
FCut/Fill Key — Used to
enter or calculate the cut or
fill amount. Based on entries
of proposed and existing
benchmarks. A fill is dis-
played as a positive value; a
cut as a negative value.
POCKET REFERENCE GUIDE — 5
eExisting Key — Used to
enter or calculate an existing
benchmark, Grade or value.
pProposed Key — Used to
enter or calculate a proposed
benchmark, Grade or value.
bBank Volume Key —
Enters or calculates the
Volume for bank fill material.
Bank fill is material in an
untouched, pristine state.
çCompacted Volume Key —
Enters or calculates the
Volume for compacted fill
material. Compacted fill is
material that has been com-
pacted.
Çç Percent Shrink (%Shrink)
— Enters or recalls percent
shrink factor for converting
between bank and com-
pacted fill Volumes. Default
is 5%.
LLoose Volume Key —
Enters or calculates the
Volume for loose fill material.
Loose fill is material that has
been disturbed or excavated.
ÇL Percent Swell (%Swell) —
Enters or recalls the percent
swell factor used for con-
verting between bank and
loose Volumes. Default is
10%.
POCKET REFERENCE GUIDE — 6
Miscellaneous Functions
aBackspace Key.
Ça ( ) Square Root.
®= Paperless Tape.
ÇS Preference Settings.
Ç÷ (1/x) Reciprocal — Finds
the reciprocal of a number
(e.g., 8Ç÷0.125).
Çx Clear All — Returns all
stored values to the default
settings. (Does not affect
Preference Settings.)
Ç- (+/–) Toggle.
Ç+ Pi (π) 3.141593.
Ç• Converts between D:M:S
and decimal degrees.
Ç% x2— Squares the value in
the display.
Ç/ Exponential Notation (x10y).
Ç0 Total Cost (based on entry
of per unit cost).
S0 Weight per Volume –
Stores a new Weight per
Volume value.
Note: After entering a value and pressing S0,
continue pressing the 0digit key until you’ve
reached the desired Weight per Volume format.
To recall your setting, press ®0.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Calculated Industries Calculatrice
Calculated Industries
Calculated Industries 3265 Manuel utilisateur
Calculated Industries
Calculated Industries 3430 Manuel utilisateur
Calculated Industries
Calculated Industries PROJECTCALC CLASSIC 8503 Manuel utilisateur
Calculated Industries
Calculated Industries 5065 Manuel utilisateur
Calculated Industries
Calculated Industries 4065 Construction Master Pro v3.0 Manuel utilisateur
Calculated Industries
Calculated Industries 8525 Manuel utilisateur
Calculated Industries
Calculated Industries Qualifier Plus IIcx Manuel utilisateur
Calculated Industries
Calculated Industries Material Estimator Manuel utilisateur
Calculated Industries
Calculated Industries Machinist Calc 4086 Manuel utilisateur
Calculated Industries
Calculated Industries CONVERSIONCALC PLUS Manuel utilisateur
Calculated Industries
Calculated Industries Construction Master IV Manuel utilisateur
Calculated Industries
Calculated Industries Construction Master 5 4050 Manuel utilisateur
Calculated Industries
Calculated Industries Construction Master 5 Manuel utilisateur
Calculated Industries
Calculated Industries PIPE TRADES PRO 4095 Manuel utilisateur
Calculated Industries
Calculated Industries Construction Master 5 Manuel utilisateur
Calculated Industries
Calculated Industries ElectriCalc Pro Manuel utilisateur
Calculated Industries
Calculated Industries 4020 Manuel utilisateur
Calculated Industries
Calculated Industries 3423 Manuel utilisateur
Calculated Industries
Calculated Industries Home ProjectCalc Manuel utilisateur
Calculated Industries
Calculated Industries 4088 Manuel utilisateur
Calculated Industries
Calculated Industries ElectriCalc Pro 5060 Manuel utilisateur
Calculated Industries
Calculated Industries Measure Master Pro 4020 Manuel utilisateur
Calculated Industries
Calculated Industries Kitchen Calc PRO Master Chef's Edition 8305 Manuel utilisateur
Calculated Industries
Calculated Industries ULTRA MEASURE MASTER 8025 Manuel utilisateur
