Cactus 602 SERIES Manuel utilisateur
Cactus Technologies, Limited
-602 Series
Industrial Grade
SATA SSD
Product Manual
April 1, 2011
Corporate Headquarters
Suite C, 15/F, Capital Trade Center
62 Tsun Yip Street, Kwun Tong
Kowloon, Hong Kong
1
Cactus Technologies, Limited
The information in this manual is preliminary and is subject to change without notice. Cactus Technologies ® , Limited shall not
be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting
from the furnishing, performance, or use of this material.
Cactus makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor
does Cactus assume any liability arising out of the application or use of its products, and specifically disclaims any and all
liability, including without limitation consequential or incidental damages.
Cactus products are not designed, intended or authori ed for use as components in systems intended for surgical implant into
the body or in other applications intended to support or sustain life or for any application where the failure of a Cactus product
can result in personal injury or death. Users of Cactus products for such unintended and unauthori ed applications shall
assume all risk of such use and shall indemnify and hold Cactus and its officers, employees, subsidiaries, affiliates and
distributors harmless against all claims, costs, damages, expenses and attorney fees arising out of, directly or indirectly, any
claim of personal injury or death associated with such unintended and unauthori ed use, even if such claim alleges that Cactus
was negligent regarding the design or manufacture of the part.
All parts of the Cactus documentation are protected by copyright law and all rights are reserved. This documentation may not,
in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable
form without prior consent, in writing, from Cactus Corporation.
© 2005-2011 Cactus Technologies Limited. All rights reserved.
Cactus Technologies Limited -602 Series Industrial Grade SATA SSD Product Manual 1.4 2
Cactus Technologies, Limited
Table of Contents
1.Introduction to Cactus Technologies -602 Series Industrial Grade SATA SSD Products .........................................4
1.1.Supported Standards...................................................................................................................................
1.2.Product Features.........................................................................................................................................
1.2.1.Host and Technology Independence................................................................................................
1.2.2.Defect and Error Management.........................................................................................................
1.2.3.Power Supply Requirements............................................................................................................6
2.Product Specifications..................................................................................................................................................6
2.1.System Environmental Specifications........................................................................................................6
2.2.System Power Requirements......................................................................................................................6
2.3.System Performance...................................................................................................................................7
2.4.System Reliability.......................................................................................................................................7
2. .Physical Specifications...............................................................................................................................7
2. .1.2. ” SATA SSD Physical Specifications.........................................................................................8
2. .2.1.8” SATA SSD Physical Specifications.......................................................................................10
3. Interface Description.................................................................................................................................................11
3.1.SSD Pin Assignments and Pin Type.........................................................................................................11
3.2.Signal Description....................................................................................................................................11
3.3.Electrical Specification.............................................................................................................................12
3.3.1.Absolute Maximum Ratings...........................................................................................................12
3.3.2.DC Characteristics..........................................................................................................................12
3.3.3.AC Characteristics..........................................................................................................................12
4.ATA Drive Register Set Definition and Protocol......................................................................................................13
4.1.ATA Task File Definitions.......................................................................................................................13
4.1.1.Data Register..................................................................................................................................13
4.1.2.Error Register.................................................................................................................................13
4.1.3.Feature Register..............................................................................................................................13
4.1.4.Sector Count Register.....................................................................................................................14
4.1. .Sector Number (LBA 7-0) Register...............................................................................................14
4.1.6.Cylinder Low (LBA 1 -8) Register...............................................................................................14
4.1.7.Cylinder High (LBA 23-16) Register.............................................................................................14
4.1.8.Drive/Head (LBA 27-24) Register.................................................................................................14
4.1.9.Status Registers..............................................................................................................................1
4.1.10.Device Control Register...............................................................................................................1
4.1.11.Drive Address Register................................................................................................................16
.ATA Command Description......................................................................................................................................16
.1.ATA Command Set..................................................................................................................................16
.1.1.Identify Drive—ECH.....................................................................................................................18
Cactus Technologies Limited -602 Series Industrial Grade SATA SSD Product Manual 1.4 3
Cactus Technologies, Limited
1.Introduction to Cactus Technologies -602
Series Industrial Grade SATA SSD Products
Features
•Solid state design with no mo ing parts
•Industry standard 2.5” or 1.8” SATA Dri e form factor
•Capacities from 8GB to 128GB
•Compliant with Serial ATA 2.6 specifications
•Supports Serial ATA Generation I/II transfer rate of 1.5/3.0Gbps
•Optional support for ATA SMART Feature Set
•Optional support for ATA Security Feature Set
•BCH ECC capable of correcting 8 random single bit errors per sector
•High reliability, MTBF > 4,000,000 hrs.
•Enhanced error correction, < 1 error in 1014 bits read
•Intelligent power management to reduce power consumption
•Voltage support: 5.0V±10%
The Cactus Technologies -602 Series SATA Solid State Dri e(SSD) is a high capacity solid-
state flash memory product that complies with the Serial ATA 2.6 standard and is
functionally compatible with a SATA hard disk dri e. Cactus -602 Series SATA SSDs pro ide
up to 128GB of formatted storage capacity in 2.5” form factor or up to 64GB in a 1.8” form
factor.
The Cactus Technologies -602 Series Industrial Grade SATA SSD product uses high quality
SLC NAND flash memory from well known endors, such as Samsung Corporation. In
addition, it include an on-dri e intelligent controller that manages interface protocols, data
storage and retrie al as well as ECC, defect handling and diagnostics, power management,
and clock control. The controller’s firmware is upgradeable, thus allowing feature
enhancements and firmware updates while keeping the BOM stable.
Cactus Technologies Limited -602 Series Industrial Grade SATA SSD Product Manual 1.4 4
Cactus Technologies, Limited
1.1. Supported Standards
Cactus Technologies -602 Series SATA SSD is fully electrically compatible with the following
specification:
•ATA 7 Specification published by ANSI: X3.221 AT Attachment Interface for Disk
Dri es
•Serial ATA 2.6 Specification published by the Serial ATA International Organization
1.2. Product Features
Cactus Technologies -602 Series Industrial SATA SSD contains a high le el, intelligent
controller. This intelligent controller pro ides many capabilities including the following:
•Standard ATA register and command set (same as found on most magnetic disk
dri es).
•Manages details of erasing and programming flash memory independent of the host
system
•Sophisticated defect managing capabilities (similar to magnetic disk dri es).
•Sophisticated system for error reco ery using powerful error correction code (ECC).
•Intelligent power management for low power operation.
1.2.1. Host and Technology Independence
Cactus Technologies -602 Series Industrial SATA SSD appears as a standard SATA disk dri e
to the host system. The dri e utilizes a 512-byte sector which is the same as that in an IDE
magnetic disk dri e. To write or read a sector (or multiple sectors), the host computer
software simply issues an ATA Read or Write command to the dri e as per the SATA protocol.
The host software then waits for the command to complete. The host system does not get
in ol ed in the details of how the flash memory is erased, programmed or read as this is all
managed by the built-in controller in the dri e. Also, with the intelligent on-board controller,
the host system software will not require changing as new flash memory e ol es. Thus,
systems that support the Cactus Technologies -602 Series Industrial SATA SSD products
today will continue to work with future Cactus Technologies -602 Series Industrial SATA SSDs
built with new flash technology without ha ing to update or change host software.
1.2.2. Defect and Error Management
Cactus Technologies -602 Series Industrial SATA SSD contains a sophisticated defect and
error management system similar to those found in magnetic disk dri es. The defect
management is completely transparent to the host and does not consume any user data
space.
The soft error rate for Cactus Technologies -602 Series Industrial SATA SSDs is much lower
than that of magnetic disk dri es. In the extremely rare case where a read error does occur,
the dri e has sophisticated ECC to reco er the data.
Cactus Technologies Limited -602 Series Industrial Grade SATA SSD Product Manual 1.4 5
Cactus Technologies, Limited
These defect and error management systems, coupled with the solid-state construction, gi e
Cactus Technologies -602 Series Industrial SATA SSDs unparalleled reliability.
1.2.3. Power Supply Requirements
Cactus Technologies -602 Series Industrial SATA SSD operates at a oltage range of 5.00
olts ± 10%.
2.Product Specifications
For all the following specifications, alues are defined at ambient temperature and nominal
supply oltage unless otherwise stated.
2.1. System Environmental Specifications
Table 2-1. Environmental Specifications
Cactus -602 SATA
SSD
Temperature Operating: 0° C to +70° C
(Standard)
-45° C to +90° C
(Extended)
Humidity Operating & Non-
Operating:
8% to 95%, non-
condensing
Vibration Operating & Non-
Operating:
20G, MIL-STD-883G
Method 2005.2,
Condition A
Shock Operating & Non-
Operating:
3,000 G, MIL-STD-883G
Method 2002.4,
Condition C
Altitude (relative to
sea level)
Operating & Non-
Operating:
100,000 feet maximum
2.2. System Power Requirements
Table 2-2. Power Requirements
Cactus Industrial SATA SSD
DC Input Voltage
(VCC)
100 mV max.
ripple (p-p)
5V ±10%
(Maximum
Average Value)
See Notes.
Sleep:
Reading:
Writing:
160 mA
350 mA
450 mA
Cactus Technologies Limited -602 Series Industrial Grade SATA SSD Product Manual 1.4 6
Cactus Technologies, Limited
NOTES: All alues quoted are typical at ambient temperature and nominal supply
oltage unless otherwise stated.
Sleep mode is specified under the condition that all dri e inputs are static CMOS
le els and in a “Not Busy“ operating state.
2.3. System Performance
All performance timings assume the dri e controller is in the default (i.e., fastest) mode.
Table 2-3. Performance
Start Up Times Reset to ready: 35 msec typical
Read Transfer
Rate
8-16GB – 110.0 MBytes/sec
32-128GB – 145 Mbytes/sec
Write Transfer
Rate
8-16GB – 70 Mbytes/sec
32-128GB – 110MBytes/sec
Controller
Overhead
Command to
DRQ
2 msec maximum
.
2.4. System Reliability
Table 2-4. Reliability
MTBF (@ 25°C) > 4,000,000 hours
Data Reliability < 1 non-reco erable error in 1014 bits READ
Endurance: > 2,000,000 erase/program cycles
2.5. Physical Specifications
The following sections pro ide the physical specifications for Cactus Technologies -602
Series Industrial SATA SSD products.
Cactus Technologies Limited -602 Series Industrial Grade SATA SSD Product Manual 1.4 7
Cactus Technologies, Limited
2.5.1. 2.5” SATA SSD Physical Specifications
Cactus Technologies Limited -602 Series Industrial Grade SATA SSD Product Manual 1.4 8
Cactus Technologies, Limited
Figure 2-1. 2.5” SATA SSD Dimensions
Cactus Technologies Limited -602 Series Industrial Grade SATA SSD Product Manual 1.4 9
Cactus Technologies, Limited
2.5.2. 1.8” SATA SSD Physical Specifications
Cactus Technologies Limited -602 Series Industrial Grade SATA SSD Product Manual 1.4 10
Table des matières
Autres manuels Cactus Stockage
Cactus
Cactus KD128GF-240S Manuel utilisateur
Cactus
Cactus OEM Grade -245S Series Manuel utilisateur
Cactus
Cactus 900S Series Manuel utilisateur
Cactus
Cactus 250SH series Manuel utilisateur
Cactus
Cactus 100 Series Manuel utilisateur
Cactus
Cactus 910S Series Manuel utilisateur
Cactus
Cactus CFast Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur