BYOC Classic Phaser Manuel utilisateur

Build Your Own Clone

Classic Phaser

Kit Instructions

Warranty:

BYOC, Inc. guarantees that your kit will be complete and that all parts and components

will arrive as described, functioning and free of defect. Soldering, clipping, cutting,

stripping, or using any of the components in any way voids this guarantee. BYOC, INC

guarantees that the instructions for your kit will be free of any majors errors that would

cause you to permanently damage any components in your kit, but does not guarantee

that the instructions will be free of typos or minor errors. BYOC, INC does not

warranty the completed pedal as a whole functioning unit, nor do we warranty any of the

individual parts once they have been used. If you have a component that is used, but feel

it was defective prior to you using it, we reserve the right to determine whether or not the

component was faulty upon arrival. Please direct all warranty issues to:

[email protected] This would include any missing parts issues.

Return:

BYOC, Inc. accepts returns and exchanges on all products for any reason, as long as they

are unused. We do not accept partial kit returns. Returns and exchanges are for the full

purchase price less the cost of shipping and/or any promotional pricing. Return shipping

is the customer’s responsibility. This responsibility not only includes the cost of

shipping, but accountability of deliver as well. Please contact

[email protected] to receive a return authorization before mailing.

Tech Support:

BYOC, Inc. makes no promises or guarantees that you will successfully complete your

kit in a satisfactory manor. Nor does BYOC, Inc. promise or guarantee that you will

receive any technical support. Purchasing a product from BYOC, Inc. does not entitle

you to any amount of technical support. BYOC, Inc. does not promise or guarantee that

any technical support you may receive will be able to resolve any or all issues you may

be experiencing.

That being said, we will do our best to help you as much as we can. Our philosophy at

BYOC is that we will help you only as much as you are willing to help yourself. We

have a wonderful and friendly DIY discussion forum with an entire section devoted to the

technical support and modifications of BYOC kits.

www.byocelectronics.com/board

When posting a tech support thread on the BYOC forum, please post it in the correct

lounge, and please title your thread appropriately. If everyone titles their threads

“HELP!” then it makes it impossible for the people who are helping you to keep track of

your progress. A very brief description of your specific problem will do. It will also

make it easier to see if someone else is having or has had the same problem as you. The

question you are about to ask may already be answered. Here is a list of things that you

should include in the body of your tech support thread:

1. A detailed explanation of what the problem is. (more than, “It doesn’t work, help”)

2. Pic of the topside of your PCB.

3. Pic of the underside of your PCB.

4. Pic that clearly shows your footswitch/jack wiring and the wires going to the PCB

5. A pic that clearly shows your wiring going from the PCB to the pots and any other

switches(only if your kit has non-PC mounted pots and switches)

6. Is bypass working?

7. Does the LED come on?

8. If you answered yes to 6 and 7, what does the pedal do when it is in the "on" position?

9. Battery or adapter (if battery, is it good? If adapter, what type?)

Also, please only post photos that are in focus.

Copyrights:

All material in this document is copyrighted 2017 by BYOC, Inc.

Classic Phaser Kit Instruction Index

Parts Checklist……………………….................…....page 6

Populating the Circuit Board…….................…...…..page 8

Main PCB Assembly..................................................page 16

Wiring……………………………….........................page 19

Installing the IC/Finishing up………………….......page 25

Operation Overview...................................................page 26

Schematic....................................................................page 27

This is what your kit should look like when it’s complete. Your kit may come with

different color capacitors, switches etc. Don’t be alarmed by this. They all still do

the exact same thing.

Parts Checklist for Classic Phaser Kit

Resistors:

2 - 4k7 (Yellow/Purple/Black/Brown/Brown)

10 - 10k (Brown/Black/Black/Red/Brown)

5 - 22k (Red/Red/Black/Red/Brown)

1 - 56k (Green/Blue/Black/Red/Brown)

6 - 150k (Brown/Green/Black/Orange/Brown)

2 - 470k (Yellow/Purple/Black/Orange/Brown)

1 - 1M (Brown/Black/Black/Yellow/Brown)

1 - 3.9M (Orange/White/Green/Gold)

Visit www.byocelectronics.com/resistorcodes.pdf for more information on how to

differentiate resistors.

Capacitors:

2 - 10n/.01uF film cap (may say “103” on the body)

6 - 47n/.047uF film cap (may say “473” or “47n” on the body)

1 - 10uf Aluminum Electrolytic

1 - 15uf Aluminum Electrolytic

Visit www.byocelectronics.com/capcodes.pdf for more info on how to differentiate

capacitors.

Diodes:

1 - 5.1v Zener diode

IC's:

6 - DIP 8 socket

6 - Single Opamp (TL071, UA741, etc)

Transistor:

4 - 2N5952 or similar JFETs with GSD pinout

1 - 2N3906 or PNP transistor with EBC pinout

Potentiometers: SNAP THE SMALL TABS ON THE TOP OF THE POTS OFF WITH A

PAIR OF NEEDLE NOSE PLIERS

1 - C500k

1 - 250k Trimpot

Hardware:

1 - predrilled enclosure w/ 4 screws

1 - Classic Phaser circuit board

1 - 3pdt footswitch

1 - Knob

1 - AC adapter jack

1 - ¼”stereo jack

1 - ¼” mono jack

1 - battery snap

1 - red LED

4 - rubber bumpers

2 - lock washers (for in and out jacks)

hook-up wire

Populating the Circuit Board

Step 1: Add all the resistors. Resistors are not polarized and can be inserted in either

direction.

Note: Leave out the 22k resistor highlighted in yellow for ‘script logo’ specs, add it

for the later ‘block logo’ specs.

Step 2: Add the diode. Be sure to match the end of the diode with the stripe to

the layout on the PCB. The striped end should go in the square solder pad.

Step 3:Add 4 pin IC sockets. ONLY SOLDER THE SOCKET! NOT

THE ACTUAL IC! This is a socket. The sockets get soldered to the PCB.

The ICs get inserted into the sockets. The actual IC chip itself, never gets

soldered. You will insert the IC into the socket after the entire pedal has

been built.

Step 4: Add the transistors. Orient them so that the flat side matches up with the flat side

on the PCB layout. The transistor highlighted in yellow is the PNP transistor. The

transistors highlighted in red are the JFETs

Table des matières

Autres manuels BYOC Pédale musicale

BYOC

BYOC 250+ Manuel utilisateur

BYOC

BYOC Stereo Analog Flanger Manuel utilisateur

BYOC

BYOC Large Beaver Manuel

BYOC

BYOC Analog Chorus Manuel utilisateur

BYOC

BYOC Reverb Manuel utilisateur

BYOC

BYOC Mimosa Jr. Manuel utilisateur

BYOC

BYOC Shredder Manuel utilisateur

BYOC

BYOC Brown Face Tremolo Manuel utilisateur

BYOC

BYOC Silver Pony 2 Manuel

BYOC

BYOC Analog Delay Kit Manuel utilisateur

BYOC

BYOC E.S.V. Fuzz Manuel utilisateur

BYOC

BYOC Armstrong Twin Manuel utilisateur

BYOC

BYOC Li'l Analog Chorus Kit Mode d’emploi

BYOC

BYOC Octave Fuzz Manuel

BYOC

BYOC Classic Overdrive Kit Manuel utilisateur

BYOC

BYOC Amp Selector and Stereo FX Router Manuel utilisateur

BYOC

BYOC Confidence Booster Manuel utilisateur

BYOC

BYOC Analog Chorus Rev 1.1 Manuel utilisateur

BYOC

BYOC Silver Pony Manuel

BYOC

BYOC Scrambled Octave Manuel utilisateur

BYOC

BYOC MK2 Manuel utilisateur

BYOC

BYOC Tremelo Manuel utilisateur

BYOC

BYOC Large Beaver Triangle Manuel utilisateur

BYOC

BYOC Bass Overdrive Manuel utilisateur

Manuels Pédale musicale populaires d'autres marques

Behringer

Behringer ULTRA WAH UW300 Manuel utilisateur

Whirlwind

Whirlwind oc-bass Manuel utilisateur

Strymon

Strymon Lex-rotary Manuel utilisateur

Behringer

Behringer PB600 Manuel utilisateur

Lexicon

Lexicon MX200 Manuel utilisateur

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manuel utilisateur

Matthews Effects

Matthews Effects Whaler V2 Manuel utilisateur

Grid 1

Grid 1 Pedal Jeanie Manuel utilisateur

Amptweaker

Amptweaker tightboost Manuel utilisateur

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manuel utilisateur

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manuel utilisateur

Dimavery

Dimavery EPVP-50 Manuel utilisateur

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manuel utilisateur

Pro-MIDI

Pro-MIDI G25 Manuel utilisateur

DW 7000 Manuel utilisateur

FAMC

FAMC Liquid-Foot Jr. Series Manuel utilisateur

Dimavery

Dimavery EPOD-50 Overdrive Manuel utilisateur

TREX

TREX ToneBug Totenschläger Manuel utilisateur