BYD HVS 5.1 Manuel utilisateur

Shenzhen BYD Electronic Co., LTD Legal Provisions

HVS&HVM Operating Manual

Legal Provisions

All the information in this document

is the property of

Shenzhen BYD Electronic Co., LTD. No

part of this document could be reproduced in any way for business use. Internal use is

allowed.

Shenzhen BYD Electronic Co., LTD makes no representations or warranties express or implied,

with respect to this document or any of the equipment and/or software it may describe,

including (with no limitation) any implied warranties of utility, merchantability, or fitness for

any particular purpose. All such representations or warranties are expressly disclaimed.

Neither Shenzhen BYD Electronic Co., LTD nor its distributors or dealers shall be liable for any

indirect, incidental, or consequential damages under any circumstances.

The exclusion of implied warranties may not apply in all cases under some statutes, and thus

the above exclusion may not apply.

This document does not replace and is not intended to replace any local, state, provincial,

federal, or national laws, regulations, or codes applicable to the installation, electrical safety,

and use of the battery system. Shenzhen BYD Electronic Co., LTD assumes no responsibility for

the compliance or noncompliance with such laws or codes in connection with the installation

of the battery system.

Specifications are subject to change without notice. Every effort has been made to make this

document complete, accurate, and up-to-date. However, Shenzhen BYD Electronic Co., LTD

may need to make some improvements under certain circumstances without advance notice.

Shenzhen BYD Electronic Co., LTD shall not be responsible for any loss caused by this

document, including, but not limited to, omissions errors, typographical errors, arithmetical

errors, or listing errors in this document.

All trademarks are recognized.

Limited Warranty

You can download the latest Limited Warranty from the Internet at www.bydbatterybox.com.

Shenzhen BYD Electronic Co., LTD

No.1, Yan’an Road Kuichong, Dapeng, Shenzhen, Guangdong Province, 518118, P.R. China

 

 
HVS&HVM Operating Manual 
 
Contents
 
Legal Provisions ......................................................................................................................................... 1 
Information on this Document ........................................................................................................ 5 
1. Validity....................................................................................................................................... 5 
2. Target Group............................................................................................................................ 5 
3. Content and Structure of this Document ............................................................................ 5 
4. Declaration of Conformity ..................................................................................................... 5 
5. Levels of Warning Messages.................................................................................................. 5 
6. Symbols in the Document...................................................................................................... 6 
7. Designation in the Document................................................................................................ 6 
Safety.................................................................................................................................................... 7 
1. Intended Use............................................................................................................................ 7 
2. IMPORTANT SAFETY INSTRUCTIONS .................................................................................... 7 
2.1. Battery Module Leakage.............................................................................................. 7 
2.2. Firefighting Measures .................................................................................................. 8 
2.3. Battery Modules Handling and Storage Guide ........................................................ 8 
2.4. Warning of Electric Shock............................................................................................ 9 
2.5. Warning of Overvoltages............................................................................................. 9 
2.6. Caution of Weight......................................................................................................... 9 
2.7. Notice of Property Damage ......................................................................................10 
Scope of Delivery..............................................................................................................................11 
Battery System Overview ................................................................................................................12 
1. Battery System Description .................................................................................................12 
2. Interface..................................................................................................................................13 
3. Symbols on the System ........................................................................................................14 
4. LED Signals .............................................................................................................................16 
Installation.........................................................................................................................................17 
1. Requirements for Installation..............................................................................................17 
1.1. Requirements for Installation Location ..................................................................17 
1.2. Tools .............................................................................................................................18 

HVS&HVM Operating Manual

5.1.3. Safety Gear .................................................................................................................. 18

5.1.4. Additionally Required Installation Material............................................................18

5.2. Installation..............................................................................................................................19

6. Electrical Connection .......................................................................................................................21

6.1. Overview of the Connection Area.......................................................................................21

6.2. Connection Diagram.............................................................................................................23

6.2.1. One Battery System ...................................................................................................23

6.2.2. Two Battery Systems..................................................................................................24

6.2.3. Three Battery Systems...............................................................................................24

6.3. Connecting the Grounding Conductor............................................................................... 25

6.4. The Data Cable Connection to an Inverter ........................................................................26

6.4.1. Connection Options ...................................................................................................26

6.4.2. Connecting the Data Cable of the Inverter.............................................................26

6.5. Connecting the Data Cable to other Battery System(s) ...................................................27

6.6. Connecting the Network Cables..........................................................................................30

6.7. DC Connection.......................................................................................................................31

6.8. Close up ..................................................................................................................................32

7. Commissioning .................................................................................................................................33

7.1. Switch on the Battery System..............................................................................................33

7.2. Configure the Battery System .............................................................................................34

7.3. Switch on and Commission the Inverter............................................................................36

8. Operation ..........................................................................................................................................37

8.1. Switch on the Battery System..............................................................................................37

8.2. Switch off the Battery System .............................................................................................37

8.3. Safety Design .........................................................................................................................38

8.4. Black Start Function ..............................................................................................................38

8.5. WLAN....................................................................................................................................... 38

9. Decommissioning.............................................................................................................................39

10.

Extension

.......................................

....................................................................................................40

11.

Troubleshooting

.......................................

........................................................................................41

HVS&HVM Operating Manual

11.1.

Battery System Behavior under Fault Conditions

.................................

.........................41

11.2.

LED Light Designation for Errors

..................................

.....................................................41

12.

Maintenance and Storage

.......................................

........................................................................43

13.

Disposal of the Battery System

.......................................

...............................................................44

14.

Technical Data

.......................................

...........................................................................................45

15.

Contact Information

.......................................

.................................................................................47

Appendix Connection Options with Inverters..................................................................................... 48

Shenzhen BYD Electronic Co., LTD 1 Information on this Document

HVS&HVM Operating Manual

DANGER

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

1. Information on this Document

1.1.

Validity

This document is valid for

the Battery-Box Premium

HVS 5.1, 7.7, 10.2, 12.8, and

HVM 8.3, 11.0,

13.8, 16.6, 19.3, 22.1

from firmware version

BMU 3.16, BMS 3.24.

1.2.

Target Group

The instructions in this document may only be performed by

qualified persons

who

must have

the following skills:

•

Knowledge of how batteries work and are operated

•

Knowledge of how an inverter works and is operated

•

Knowledge of, and adherence to the locally applicable connection requirements, standards,

and directives

•

Knowledge of, and adherence to this document and the associated system documentation,

including all safety instructions

•

Training in dealing with the hazards associated with the installation and operation of

electrical equipment and batteries

•

Training in the installation and commissioning of electrical equipment

Failure to do so will make any manufacturer's warranty,

guarantee or liability null, and void

unless you can prove

that the damage was not due to non-compliance.

1.3.

Content and Structure of this Document

This document contains safety information

and

instructions,

scope of delivery, system

overview, installation, electrical connection,

commissioning, decommissioning, expansion,

troubleshooting, maintenance and storage, disposal,

and

technical data.

Please finish reading

this document before taking any actions on the

battery

system.

1.4.

Declaration of

Conformity

The battery system described in this document complies with the applicable European

directives. The

certificate is available in the download area

www.bydbatterybox.com.

1.5.

Levels of Warning Messages

The following levels of warning messages may occur when handling the

battery

system.

1 Information on this Document Shenzhen BYD Electronic Co., LTD

HVS&HVM Operating Manual

1.6. Symbols in the Document

1.7. Designation in the Document

Designation in this document

Complete designation

battery system

BYD Battery-Box Premium HVS&HVM

BCP

Be Connect Plus

BCU

Battery Control Unit

BIC

Battery Information Collector

BMS

Battery Management System

BMU

Battery Management Unit

BYD

Shenzhen BYD Electronic Co., LTD

SOC

State of Charge

Sections describing activities to be performed by

qualified persons only.

CAUTION

Indicates a hazardous situation which, could result in minor or moderate injury.

NOTICE

Indicates a situation which, if not avoided, can result in property damage.

Shenzhen BYD Electronic Co., LTD 2 Safety

HVS&HVM Operating Manual

2. Safety

2.1. Intended Use

The battery system is for residential and works with a photovoltaic system. It is a high voltage

Li-ion battery storage system, with the control module on itself. It could be operated in on-grid,

off-grid and backup modes with compatible inverters.

The battery system could be connected to the Internet through network cable for maintenance

and firmware updating.

The battery system must only be used as stationary equipment.

The battery system is suitable for indoor and outdoor use under the conditions mentioned in

Section 5.1.

The battery system must only be operated in connection with a compatible inverter. The list

(BYD Battery-Box Premium HVS & HVM Compatible Inverter List) of these inverters could be

found at www.bydbatterybox.com.

The battery system is not suitable for supplying life-sustaining medical devices. Please ensure

that no personal injury would lead due to the power outage of the battery system.

Alterations to the battery system, e.g., changes or modifications are not allowed unless the

written permission of BYD is achieved. Unauthorized alterations will void the guarantee and

warranty claims. BYD shall not be held liable for any damage caused by such changes.

The type label should always be attached to the battery system.

2.2. IMPORTANT SAFETY INSTRUCTIONS

The battery system has been designed and tested in accordance with international safety

requirements. However, in order to prevent personal injury and property damage and ensure

long-term operation of the battery system, please do read this section carefully and observe all

safety information at all times.

2.2.1. Battery Module Leakage

If the battery modules leak electrolytes, contact with the leaking liquid or gas should be

avoided. The electrolyte is corrosive, and the contact may cause skin irritation and chemical

burns. If one is exposed to the leaked substance, do these actions:

Inhalation: Evacuate the contaminated area, and seek medical help immediately.

Eye contact: Rinse eyes with flowing water for 15 minutes and seek medical help immediately.

Skin contact: Wash the affected area thoroughly with soap and water and seek medical help

immediately.

Ingestion: Induce vomiting and seek medical help immediately.

2 Safety Shenzhen BYD Electronic Co., LTD

HVS&HVM Operating Manual

2.2.2. Firefighting Measures

The battery modules may catch fire when it is put into the fire. In case of a fire, please make

sure that an ABC or carbon dioxide extinguisher is nearby. Water cannot be used to extinguish

the fire.

Full protective clothing and self-contained breathing apparatus are required for the firefighters

to extinguish the fire.

2.2.3. Battery Modules Handling and Storage Guide

•The battery modules and its components should be protected from damage when

transporting and handling.

•Do not impact, pull, drag, or step on the battery modules.

•Do not insert unrelated objects into any part of the battery modules.

•Do not throw the battery module into a fire.

•Do not soak the battery modules in water or seawater.

•Do not expose to strong oxidizers.

•Do not short circuit the battery modules.

•The battery modules cannot be stored at high temperatures (more than 50°C).

•The battery modules cannot be stored directly under the sun.

•The battery modules cannot be stored in a high humidity environment.

•Do not use the battery modules if it is defective, or appears cracked, broken or otherwise

damaged, or fails to operate.

•Do not attempt to open, disassemble, repair, tamper with, or modify the battery modules.

The battery modules are not user-serviceable.

•Do not use cleaning solvents to clean the battery modules.

Shenzhen BYD Electronic Co., LTD 2 Safety

HVS&HVM Operating Manual

2.2.4. Warning of Electric Shock

2.2.5. Warning of Overvoltages

2.2.6. Caution of Weight

CAUTION

DANGER



Danger to life due to electric shock when live components or DC cables are

touched

The DC cables connected to an inverter may be live. Touching live DC cables results in death or

serious injury due to electric shock.

•

Disconnect the

battery

system and inverter from voltage sources and make sure it

cannot be

reconnected before

working on the device.

•

Do not touch non-insulated parts or cables.

•

Do not remove the terminal block

with the connected DC conductors from the slot under

load.

•

Wear suitable personal protective equipment for all

work on the

battery system.

•

Observe all safety information of the inverter manufacturer.

Danger to life due to electric shock

in case of overvoltages and if surge

protection is missing

Overvoltages (e.

g. in the event of a flash of lightning) can be further conducted into the building

and to other connected devices in the same network

via the

network

cables or other data cables if

there is no surge protection. Touching live parts and cables results in death or lethal injuries due to

electric shock.

•

Ensure that all devices in the same network

and the inverter

are integrated into the

existing

surge protection.

•

When laying the network

cables or other data cables outdoors, it must be ensured that a

suitable surge protection device is provided at the transition point of the cable from the

battery

system

or the

inverter

outdoors to the inside of a building.

Risk

of injury due to

weight of

the

battery module

Injuries may result if the

battery module

is lifted incorrectly or dropped

while being

transported or

installed.

•

Transport and lift the

battery module

carefully. Take the

weight of the

battery module

into

account.

•

Wear suitable personal protective equipment for all

work

on the

battery

system.

Autres manuels pour HVS 5.1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels BYD Accessoires pour appareils photo

BYD

BYD Battery-Box HV series Manuel utilisateur

BYD

BYD B-BOX 2.5 Manuel utilisateur

BYD

BYD Battery-Box Pro 2.5 Manuel utilisateur

BYD

BYD Battery-Box Premium HVS Series Mode d’emploi

BYD

BYD Battery-Box Premium LVL 15.4 Manuel utilisateur

BYD

BYD Battery-Box Premium LVL 15.4 Manuel utilisateur

BYD

BYD Battery-Box H 5.0 Manuel utilisateur

BYD

BYD Battery-Box C130 Manuel utilisateur

BYD

BYD Battery-Box LV Manuel utilisateur

BYD

BYD B-Box H Manuel utilisateur

BYD

BYD Battery-Box Pro series Manuel utilisateur

BYD

BYD Battery-Box Premium HVS 5.1 Manuel utilisateur

BYD

BYD B-BOX 10.0 Manuel utilisateur

BYD

BYD H 5.0 Manuel utilisateur

BYD

BYD B-Box Res 2.5 Manuel utilisateur

BYD

BYD Battery-Box Pro 2.5 Manuel utilisateur

BYD

BYD Battery-Box HV Manuel utilisateur

BYD

BYD HV Series Manuel utilisateur

BYD

BYD Battery-Box Pro series Manuel utilisateur

BYD

BYD Battery-Box Pro series Mode d’emploi

BYD

BYD Res 2.5-10.0 Manuel utilisateur

BYD

BYD MINI ES-P30B3-AU-R2 Manuel utilisateur

BYD

BYD Battery-Box Premium LVL Series Manuel utilisateur

BYD

BYD B-BOX 2.5 Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur