Burnham Revolution Manuel utilisateur

88% High Efﬁciency Gas-ﬁred Water Boiler

• High Efﬁciency up to 88% AFUE

• 6 Sizes Available

• 62 - 190 MBH

• Natural or LP Gas

• Direct Vent or Induced Draft

• Cast Iron Sectional Design with

Diamond Pin Heat Transfer Surface

• Water Boiler with Low Temperature

Return Water Capabilities

• Lifetime Limited Warranty

Revolution

Limited

Lifetime

Warranty!

88%

HIGH EFFICIENCY

Burnham Revolution®

High Efﬁciency Gas-ﬁred Boiler

The Revolution Boiler is one of the most efﬁcient cast iron, gas-ﬁred

boilers available. With an Annual Fuel Utilization Efﬁciency (AFUE) of

up to 88%, the Revolution exceeds the minimum requirements for its

ENERGY STAR® rating. The Revolution boiler is an advanced cast iron

design concept that was developed from the ground up by

U.S. Boiler Co. engineers.

Unique Boiler Design

The heart of a heat exchanger is its ability to transfer heat as efﬁciently as possible.

The Revolution boiler uses a unique design conﬁguration to achieve its high

efﬁciencies. First, the ﬂue gases pass through the heat exchanger in the traditional

way. Then, as the ﬂue gases rise above the heat exchanger, they are pulled across a

secondary surface to allow for an heat transfer process to

take place.

This secondary heating surface is ﬁtted with unique diamond

shaped heat transfer pins that are speciﬁcally designed to extract

the maximum amount of heat possible. This design concept is only

available in Burnham Revolution boilers.

Easy to Install, Maintain, and Service

U.S. Boiler Co. has designed the Revolution boiler to adapt to the needs of nearly any

home heating application. Besides the ﬂexibility of either horizontal or vertical

venting capabilities, there is an option to use either indoor (induced draft) or

outdoor (direct vent) air for the combustion process.

The Revolution boiler is also pre-piped with a primary/secondary loop installed in the

boiler. This loop provides for easy hookup to a low temperature system, and with the

addition of a few simple controls, the Revolution boiler will perform well with radiant

ﬂoor heating installations or other low temperature heating applications.

Also, for further ease in installation, all piping and venting connections are

conveniently located at the top of the boiler.

Ultimately, the ﬂexibility of the Revolution boiler means less time is required for the

installation, maintenance, and servicing of this advanced boiler system… all resulting

in savings for the homeowner.

Lifetime Limited Warranty

Revolution boilers are made with cast iron sections that are produced at Burnham

Foundry, LLC in Zanesville, Ohio and are assembled and tested at U.S. Boiler Co.

facilities in Lancaster, PA. The Revolution is protected with a limited lifetime warranty

on the heat exchanger. Additional coverage is available by purchasing the U.S. Boiler

Extended Warranty Plan which provides blanket protection on parts and labor for 5 or

10 years from the date of installation.

Diamond Pin

Heat Transfer Surface

Revolution

Built-in primary/secondary

piping loop saves time and

simpliﬁes installation

Revolution® Boiler

Burnham Alliance SL™

Indirect-ﬁred Water Heaters

For an abundant supply of domestic hot water, be sure to use an Burnham

Alliance SL indirect-ﬁred water heater with every boiler application.

The Alliance SL water heaters are designed with an

effective hydrastone lining that offers superior

corrosion resistance and outstanding performance in

a wide variety of water conditions.

Water heaters are available in ﬁve sizes and come with

a unique 10/2/1 warranty – 10 years on the tank and

coil, 2 years labor and 1 year on parts. An optional

lifetime warranty is also available.

2-pass cast iron heat

exchanger provides

AFUE’s up to 88%

Step opening gas

valve and electron-

ic ignition provides

for smooth, quiet

start-up

The VS300 injection control

and pump helps eliminate

condensate and thermal

shock concerns while pro-

viding temperature control

with system temperatures

from 55° to 210°F

Stainless steel

burners help ensure

long-term reliability

and high efﬁciency

operation

Superior base and jacket

design helps keep surface

temperatures cooler

High strength trapezoidal legs

with nylon glides make

moving boilers easy and

protect against potential

damage to ﬂoors

All piping and venting

connections on top of boiler

Proven stainless steel vent

system that works well with

high ﬂue gas temperatures

GAS BOILERS

Made in

America

Ratings and Speciﬁcations

1. Ratings shown are for installations at sea level and elevations up to 2000 feet. Ratings reduce 4% for each 1000 ft. above sea level.

2. The Revolution is designed to vent directly through the wall or roof using Burnham’s approved vent systems, and AL29-4C® stainless steel pipe. Inlet air can be supplied using

single wall metal pipe or PVC pipe using Burnham’s PVC air intake kit.

Natural Gas or LP Gas

Boiler

Model

Input

(MBH)

DOE

Heating

Capacity

(MBH)

I = B = R

Net Rating

(MBH) AFUE (%)

Maximum Vent

Length

(Equiv. Ft.)

Maximum

Air Inlet

Length

Water

Capacity

(Gal.)

Approximate

Shipping

Weight

(Lbs.)

RV3

RV4

RV5

RV6

RV7

130

164

190

114

143

166

124

144

88.0

87.6

87.4

87.2

87.0

3.6

4.4

5.1

5.9

6.6

260

354

448

542

636

Boiler

Model A B C D

RV3 24-3/4 10 5-15/16 7-1/8

RV4 28 13-1/4 7-9/16 7-1/8

RV5 31-1/4 16-1/2 9-3/16 6-7/8

RV6 34-1/2 19-3/4 10-13/16 6-7/8

RV7 37-3/4 23 12-7/16 6-7/8

Dimensions

TOP VIEW FRONT VIEW

Boiler

Model

Gas Valve

Inlet

(NPT)

Water Supply

& Return

(NPT)

Air Inlet

Diameter

(In.)

Vent

Diameter

(In.)

RV3

RV4

RV5

RV6

RV7

1/2

3/4

1-1/4

Gas, Water and Vent Connections

Phone: 1-888-432-8887

www.usboiler.burnham.com

Autres manuels pour Revolution

Ce manuel convient aux modèles suivants

Autres manuels Burnham Chaudière

Burnham

Burnham MPO Series Instructions d'installation et d'entretien

Burnham

Burnham 5B Series Mode d’emploi

Burnham

Burnham SM-6 Manuel de service

Burnham

Burnham LEDV SERIES Instructions d'installation et d'entretien

Burnham

Burnham Alpine Series Manuel

Burnham

Burnham V11H Series Manuel de service

Burnham

Burnham 8HE Series Manuel de service

Burnham

Burnham Independence Manuel de formation

Burnham

Burnham Alpine ALP080 Manuel du propriétaire

Burnham

Burnham 20_PV_I Manuel de service

Burnham

Burnham 8H Series Manuel utilisateur

Burnham

Burnham Alpine ALP080 Manuel du propriétaire

Burnham

Burnham Independence IN12 Manuel utilisateur

Burnham

Burnham V9A Series Manuel de service

Burnham

Burnham 8B Series Manuel du propriétaire

Burnham

Burnham 5B Series Manuel utilisateur

Burnham

Burnham LE L7248 Manuel d'utilisation

Burnham

Burnham FREEDOM FCM120 Manuel de service

Burnham

Burnham Apex APX399 Manuel de service

Burnham

Burnham Alpine Series Manuel

Burnham

Burnham 8HE Series Guide de l'utilisateur

Burnham

Burnham HF SERIES Manuel utilisateur

Burnham

Burnham 805H Manuel de service

Burnham

Burnham SERIES 2 Instructions d'installation et d'entretien

Manuels Chaudière populaires d'autres marques

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manuel utilisateur

Radijator

Radijator BIO max 23.1 Manuel utilisateur

Brunner

Brunner BSV 20 Manuel utilisateur

Buderus

Buderus Logamax GB062-24 KDE H V2 Manuel utilisateur

Potterton

Potterton 50e Fiche technique

UTICA BOILERS

UTICA BOILERS TriFire Manuel utilisateur

Joannes

Joannes LADY Series Manuel

ECR International

ECR International UB90-125 Manuel d'instructions

Froling

Froling FHG Turbo 3000 Manuel utilisateur

Froling

Froling P4 Pellet 8 - 105 Manuel utilisateur

U.S. Boiler Company

U.S. Boiler Company K2 Manuel utilisateur

Henrad

Henrad C95 FF Manuel utilisateur

NeOvo

NeOvo EcoNox EF 36 Manuel utilisateur

Potterton

Potterton PROMAX SL 12 Manuel utilisateur

Eco Hometec

Eco Hometec EC 25 COMPACT Manuel utilisateur

Viessmann

Viessmann VITODENS 200 Mode d’emploi

Baxi

Baxi Prime 1.24 Manuel utilisateur

REXNOVA

REXNOVA ISA 20 BITHERMAL Manuel utilisateur