Burkert 8026 Manuel utilisateur

Quickstart

Type 8026 - 8036 - 8076

Flowmeters with paddle wheel

English

We reserve the right to make technical changes without notice.

Technische Änderungen vorbehalten.

Sous réserve de modifications techniques.

Quickstart 1207/1_EU-ML_00561813_original_FR

1. ABOUT THE QUICKSTART.........................................................................3

2. INTENDED USE ................................................................................................4

3. BASIC SAFETY INFORMATION ...............................................................4

4. GENERAL INFORMATION ...........................................................................6

5. DESCRIPTION OF THE NAME PLATE ..................................................6

6. TECHNICAL DATA ...........................................................................................7

7. INSTALLATION AND WIRING .................................................................17

8. ADJUSTMENT AND COMMISSIONING ............................................27

9. MAINTENANCE AND TROUBLESHOOTING ..................................40

10. PACKAGING, TRANSPORT ...................................................................40

12. DISPOSAL OF THE PRODUCT ...........................................................41

About the Quickstart

Type 8026- 8036- 8076

attention

Warns against a possible risk.

• Failure to observe this warning can result in substantial or minor

injuries.

note

Warns against material damage.

•

Failure to observe this warning may result in damage to the device

or system.

Indicates additional information, advice or important

recommendations.

Refers to information contained in this manual or in other

documents.

→Indicates a procedure to be carried out.

1.2. Definition of the word "device"

→The word "device" used within this manual refers to the flow-

meter type 8026, 8036 or 8076.

1. ABOUT THE QUICKSTART

This Quickstart describes the entire life cycle of the device. Please

keep this Quickstart in a safe place, accessible to all users and any

new owners.

Important safety information.

Respect the safety instructions. Study in particular the chapters

entitled Intended Use and Basic Safety Instructions.

• The quickstart must be read and understood.

The quickstart explains how to install, adjust, and start-up the device.

A detailed description of the device can be found in the related ope-

rating instructions available on the CD delivered with the device.

1.1. Symbols used

danger

Warns against an imminent danger.

• Failure to observe this warning can result in death or in serious

injury.

Warning

Warns against a potentially dangerous situation.

• Failure to observe this warning can result in serious injury or even

death.

English

Intended use

Type 8026- 8036- 8076

2. INTENDED USE

Use of the device that does not comply with the instructions

could present risks to people, nearby installations and the

environment.

• 8026, 8036 and 8076 devices are intended to measure the

flow rate of liquids:

- 8026 and 8036 flowmeters are used to measure the flow of

neutral or slightly aggressive liquids,

- 8076 flowmeters are used to measure the flow rate of

viscous liquids such as honey or oil, which are free of solid

particles.

• This device must be protected against electromagnetic interfe-

rence, ultraviolet rays and, when installed outdoors, the effects

of climatic conditions.

• This device must be used in compliance with the characteristics

and commissioning and use conditions specified in the contrac-

tual documents and in the user manual.

• Requirements for the safe and proper operation of the device

are proper transport, storage and installation, as well as careful

operation and maintenance.

• Only use the device as intended.

→Observe any existing restraints when the device is exported.

3. BASIC SAFETY INFORMATION

This safety information does not take into account:

• any contingencies or occurences that may arise during installation,

use and maintenance of the devices.

• the local safety regulations for which the operating company

is responsible including the staff in charge of installation and

maintenance.

Danger due to high pressure in the installation.

• Stop the circulation of fluid, cut off the pressure and drain the

pipe before loosening the process connections.

Danger due to electrical voltage.

• Shut down and isolate the electrical power source before car-

rying out work on the system.

• Observe all applicable accident protection and safety regulations

for electrical equipment.

Danger due to high temperatures of the fluid.

• Use safety gloves to handle the device.

• Stop the circulation of fluid and drain the pipe before loosening

the process connections.

Danger due to the nature of the fluid.

• Respect the prevailing regulations on accident prevention and

safety relating to the use of aggressive fluids.

English

Basic safety information

Type 8026- 8036- 8076

Various dangerous situations

To avoid injury take care:

• to prevent any unintentional power supply switch-on.

• to ensure that installation and maintenance work are

carried out by qualified, authorised personnel in possession of

the appropriate tools.

• to guarantee a defined or controlled restarting of the process,

after a power supply interruption.

• to use the device only if in perfect working order and in com-

pliance with the instructions provided in the instruction manual.

• to observe the general technical rules when installing and using

the device.

• not to use the device in explosive atmospheres.

• not to use the device for the measurement of gas flow rates.

• not to use the device in an environment incompatible with the

materials it is made of.

• not to use fluid that is incompatible with the materials the device

is made of.

• not to subject the device to mechanical loads (e.g. by placing

objects on top of it or by using it as a step).

• Do not make any external modifications to the device. Do not

paint or varnish any part of the device.

note

The device may be damaged by the fluid in contact with.

• Systematically check the chemical compatibility of the compo-

nent materials of the device and the fluids likely to come into

contact with it (for example: alcohols, strong or concentrated

acids, aldehydes, alkaline compounds, esters, aliphatic com-

pounds, ketones, halogenated aromatics or hydrocarbons,

oxidants and chlorinated agents).

note

Elements / Components sensitive to electrostatic discharges

• This device contains electronic components sensitive to electro-

static discharges. They may be damaged if they are touched by

an electrostatically charged person or object. In the worst case

scenario, these components are instantly destroyed or go out of

order as soon as they are activated.

• To minimise or even avoid all damage due to an electrostatic

discharge, take all the precautions described in the EN 61340-

5-1 and 5-2 norms.

• Also ensure that you do not touch any of the live electrical

components.

English

General information

Type 8026- 8036- 8076

4. GENERAL INFORMATION

4.1. Manufacturer's address and

international contacts

To contact the manufacturer of the device, use following address:

Bürkert SAS

Rue du Giessen

BP 21

F-67220 TRIEMBACH-AU-VAL

You may also contact your local Bürkert sales office.

The addresses of our international sales offices are available on the

internet at: www.burkert.com

4.2. Warranty conditions

The condition governing the legal warranty is the conforming use

of the in observance of the operating conditions specified in this

manual.

4.3. Information on the Internet

You can find the user manuals and technical data sheets regarding

the types 8026, 8036 or 8076 at: www.burkert.com

5. DESCRIPTION OF THE NAME

PLATE

8026 Flow-Meter

Supply: 14-36VDC

Output: 1x4-20mA 2xTransistors 500 mA Max

Cell: HALL INSERTION SHORT

Process: Temp -15/100°C

PN 10 Bar

IP67 W49LU

S-N:1110

00560861

Made in France

1:V+

2:NPN/PNP1

3:0V

4:NPN/PNP2

Fig. 1: Example of a name plate

1. Type of the device and measured variable

2. Power supply

3. Output specifications

4. Type of sensor

5. Fluid temperature range

6. Fluid pressure

7. Allocation of the pins on the M12 fixed connectors

8. Manufacturing code

9. Order code

English

Technical data

Type 8026- 8036- 8076

10. Serial number

11. Protection rating

6. TECHNICAL DATA

6.1. Conditions of use

Ambient temperature -10 to +60 °C

Air humidity < 85%, non condensated

Protection rating IP67 and IP65 with connectors plugged

in and tightened and electronic module

cover fully screwed down

6.2. Conformity to standards and

directives

6.2.1. Conformities common to the 8026

and the SE36

• EMC: EN 61000-6-2, EN 61000-6-3

• Vibration: EN 60068-2-6

• Shock: EN 60068-2-27

For UL devices ( ) in the United States of America and

Canada:

• UL 61010-1

• CAN/CSA-C22.2 n° 61010-1

English

Technical data

Type 8026- 8036- 8076

6.2.2. Conformity to the pressure directive

of flowmeters 8026 and fittings

S030 and S070

The devices 8026 and the fittings S030 and S070 comply with

article 3§3 of the pressure directive.

Acc. to the 97/23/CE pressure directive, the product can only be

used in the following cases (depending on max. pressure, pipe dia-

meter and fluid):

Type of fluid Conditions

Fluid group 1, par.

1.3.a

• Flowmeter 8026 and fitting S030:

DN ≤ 25 only

• Fitting S070: Forbidden

Fluid group 2 par. 1.3.a DN ≤ 32

or DN > 32 and PNxDN ≤ 1000

Fluid group 1 par. 1.3.b • Flowmeter 8026: DN ≤ 25

or DN > 25 and PNxDN ≤ 2000

• Fittings S030 and S070:

PNxDN ≤ 2000

Fluid group 2 par. 1.3.b • Flowmeter 8026: DN ≤ 400

• Fittings S030 and S070: DN ≤ 200

6.3. General technical data

6.3.1. Mechanical data

Part Material

Box / seals stainless steel 1.4404, PPS /

EPDM

Cover / seal PC / EPDM

Display module PC / PBT

M12 fixed connector nickel-plated brass

Fixed connector holder stainless steel 1.4404 (316L)

Screws Stainless steel

Nut PC

Flow sensor holder / seal (only

8026)

PVDF / FKM (default)

Axis and shaft of the paddle

wheel (only 8026)

Ceramic (Al2O3)

Paddle wheel (only 8026) PVDF

Quarter-turn system (only SE36) PC

English

Technical data

Type 8026- 8036- 8076

EPDM

PPS

EPDM

PVDF

Stainless steel

Nickel-plated

brass

PPS

PVDF Ceramic (Al2O3)

FKM

Fig. 2: Materials used in the 8026 fowmeters

EPDM

PPS

EPDM

Stainless steel

Nickel-plated

brass

Fig. 3: Materials used in the SE36 electronic module for the

8036 or 8076 flowmeters

• Materials of the 8026 in contact with the fluid: PVDF, ceramic,

FKM (default).

140

131

Fig. 4: Dimensions of electronic module SE36

English

Technical data

Type 8026- 8036- 8076

DN H [mm]

with fitting S030

06 160

08 160

15 165

20 163

25 163

32 166

40 170

50 177

65 177

Fig. 5: Dimension H of flowmeter 8036

DN H [mm]

with fitting S070

15 166

25 181

40 198

50 216

80 256

100 257

Fig. 6: Dimension H of flowmeter 8076

230 / 268,5 1)

151

Ø 75

Ø 65

Ø 26,5

1) with short sensor / with long sensor

Fig. 7: Dimensions of flowmeter 8026

English

Autres manuels pour 8026

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Burkert Instrument de mesure

Burkert

Burkert 8026 Manuel utilisateur

Burkert

Burkert MS08 Manuel utilisateur

Burkert

Burkert 8756 Manuel utilisateur

Burkert

Burkert 8077 Manuel utilisateur

Burkert

Burkert 8024 Manuel utilisateur

Burkert

Burkert 8756 Manuel utilisateur

Burkert

Burkert 8746 Manuel utilisateur

Burkert

Burkert ELEMENT neutrino 8202 Manuel utilisateur

Burkert

Burkert 8035 Manuel utilisateur

Burkert

Burkert 8222 ELEMENT NEUTRINO Manuel utilisateur

Burkert

Burkert 8202 ELEMENT Manuel utilisateur

Burkert

Burkert 8202 ELEMENT Manuel utilisateur

Burkert

Burkert MassFlowMeter 8700 Manuel utilisateur

Burkert

Burkert 8202 ELEMENT Manuel utilisateur

Burkert

Burkert 8742 Manuel utilisateur

Burkert

Burkert ELEMENT neutrino 8202 Manuel utilisateur

Burkert

Burkert 8026 Manuel utilisateur

Burkert

Burkert 8045 Manuel utilisateur

Burkert

Burkert 8756 Manuel utilisateur

Burkert

Burkert 8045 Manuel utilisateur

Burkert

Burkert 8030 HT Manuel utilisateur

Burkert

Burkert 8025 Series Manuel utilisateur

Burkert

Burkert ELEMENT 8228 Manuel utilisateur

Burkert

Burkert 8030 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur