BT BT3880 Fiche technique
BT3880
with call blocking
and answer machine
Quick Set-up and User Guide
Digital Cordless Phone with Answer Machine
You’ll need Caller Display to get the most from your nuisance call blocker
phone and for all the features to work, you’ll need to subscribe to a Caller
Display service from your network provider. Charges may apply.
2
Important – please read rst
• Only use the line cord, power
supply and rechargeable batteries
that come with your phone.
• Make sure the power supply is
connected to a socket that you
know works.
• Connect your phone to the power
supply and let the batteries charge
for 16 hours before connecting
your phone to the phone socket.
• The base should always be
plugged in to the mains
power supply.
Your Answer Machine
Make sure the phone is set to
ANS & REC and that the answer
delay is set to answer before any
voicemail service does. The default
setting is four rings. If you want to
change it, take a look at page 30.
Where to put your phone
To make sure your handset gives
you the best range and reception,
avoid interference by placing it
away from any large metal objects
like fridge-freezers, microwave
ovens, or electronic products such
as computers and TVs.
3
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Check the box contents
Handset
If you bought more than one
handset you’ll also get:
• Extra handset
• Charger with mains power
adapter all ready installed
(item code 083050)
• Two rechargeable batteries,
AAA NiMH 500mAh (already
installed in the handset)
Important
Only use the mains power adaptors,
cables and rechargeable batteries
supplied in this box or this product
might not work. Any replacement
rechargeable batteries must be
of the same type. BT accepts no
responsibility for damage caused
to your BT3880 if you use any
other type of batteries.
Base
Phone line (this comes
already installed)
Mains power adaptor
(item code 066771)
Two rechargeable
batteries, AAA NiMH
500mAh (already
installed in the handset)
4
Quick set-up guide
Where to put your phone
• Place the base within 2 metres
of a mains power socket and
1.8 metres of a phone socket
so the cables will reach.
• Make sure it’s at least a metre
away from other electrical
appliances to avoid interference.
• Don’t place the phone or
base in a bathroom or other
humid area.
• The product works by sending
radio signals between the
handset and base. The strength
of the signal depends on where
you position the base. Putting it
as high as possible can help give
you the best signal.
1. Plug in
1. Plug the mains power adaptor
into the base, with the cable clipped
in the groove provided.
2. Plug the other end of the power
adaptor into the wall power socket
and switch on.
Important
• Don’t connect the phone line to
a phone socket until the handset is
fully charged.
• The base station should be plugged
into the power socket all the time.
1
2
Quick set-up guide
5
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
1. Activate the batteries by pulling
the plastic tab away from the
bottom of
the handset.
2. The handset will then check for a
link with the base station. When it’s
found it.
3. Place the handset on the base
and let it charge for 16 hours.
4. After 16 hours, plug the phone
line cord into the phone wall socket.
Talk/Standby time
Under ideal conditions, the
handset batteries should give
up to 12 hours talk time or
120 hours standby on a single
charge. (This doesn’t mean you
can unplug the base or leave
the handset for this length of
time without charge).
Please note that new Ni-MH
rechargeable batteries don’t
reach full capacity until
they’ve been in normal use
for several days.
Battery low warning
You will hear a warning beep
every 2 minutes during a call
and the
You must recharge the
handset batteries before you
can use the handset. If the
charge completely runs out
Place the handset on the base
or charger to charge.
2. Charge
Rechargeable batteries
already fitted
Remove this tab
and charge batteries
for 16 hours before use.
4
Quick set-up guide
6
Set up for additional handsets
(multipacks only)
1. Plug the mains power adaptor
into the mains wall socket and
switch on the power.
2. Activate the batteries as
explained on page 5.
3. Place the handset on the charger
to charge for 16 hours.
Battery performance
• To keep the batteries in
the best condition, leave the
few hours at a time.
• Running the batteries right
down at least once a week
will help them last as long
as possible.
• After charging your handset
charging time for the batteries
is approximately 8 hours.
• The charge capacity of
rechargeable batteries will go
down over time, which will
reduce the talk and standby
time. Eventually they’ll need
replacing. For details on how
to get replacement batteries,
call the helpline on 0800
218 2182*.
Tip
If you need to take the batteries out,
slide the battery cover down, then
gently take the batteries out.
1
Quick set-up guide
7
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Using your BT3880 on a line
with broadband?
To avoid problems with your
broadband or noise on your
phone line, you might need to
plug your telephone line cord
into the wall socket via
If your main phone socket has
a single socket, you do need to
every phone socket where
in – up to a maximum of four
per line – including alarm
sytems and digital TV boxes.
You can get BT ADSL micro
You don’t need to use
phone socket has two
Your BT3880 is now ready for you
to use
• For help setting the date and time,
go to page 42.
• For instructions on making a call,
go to page 15.
• For help personalising your phone’s
settings, go to page 37.
• For instructions on using the
answer machine, go to page 28.
the Help section on page 49 or
Alternatively, call the Helpline on
0800 218 2182*.
Tip
If you call the Helpline for advice,
it’s a good idea to call using
another phone so you can follow
any instructions using your
BT3880.
* Calls made from within the UK
mainland and mobile networks are free.
International call costs may vary.
3. Go!
8
Contents
4 Quick set-up guide
10 Getting to know your phone
– Handset buttons
12 Handset display
13 Finding your way around your
phone
14 Base buttons
15 Using the phone
– Make an external call
– Preparatory dialling
– End a call
– To switch the handset on
16 Receive a call
– Call Waiting
17 Mute
– Using handsfree
– Incoming speech/
Handsfree volume
18 Redial
– Voicemail service (BT 1571)
– Find handset (Paging)
19 Phonebook
– Store entry in phonebook
(up to 50)
20 Dial entry in phonebook
– Character map
– View/dial entry in phonebook
21 Edit entry in phonebook
– Delete entry in phonebook
22 Delete all entries in phonebook
– View the phonebook
memory status
23 Call Blocking
– Block incoming call number in
your Calls list
– Turn call blocking on to
enable blacklist
24 Add, view, edit or delete a
number in your blacklist
– Block incoming call by call type
25 Caller Display and the
Calls List
– Caller Display
– Calls list
26
– View/dial an entry in the Calls list
– Save a Calls list entry to
your phonebook
27 Delete an entry in the Calls list
– Delete the entire Calls list
28 Answer Machine
– Using the answer machine from
the handset
– Switch the answer machine on
– Outgoing messages
Contents
9
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
29 Record your own outgoing
message
– Play the current outgoing
message
30 Set the answer mode (Answer
& Record or Answer Only)
– Set the answer delay
31 Set the maximum message length
– Call screening
32 Using call screening
– Message playback using
the handset
33 Delete all old (played) messages
– Using the answer machine from
the base
– Message playback using the base
34 Delete all old (played) messages
– Remote access
35 Change the remote access PIN
36 If you forget to switch on your
answer machine
– Operating you answer
machine remotely
37 Settings
– Set the handset ringtone for
external or internal calls
– Set the handset ringer volume
38
– Change the handset name
39 Change the call settings
– Set the base ringtone
– Set the base ringer volume
40 Set a PBX access code
– Change the system PIN
41 Reset the handset or base
settings
42 Clock/Alarm
– Set the time and date
– Set an alarm
– Stopping the alarm when it
43 Using additional handsets
– Register an additional handset
– De-register a handset
44 Make an internal call
between handsets
– Transfer a call
45 Hold a 3-way call
46 Menu Map
49 Help
52 General information
10
Menu / Left option button
Press to enter the main menu, access
Scroll up / Vol. up / Calls list
Enter Calls list.
Move up through menu options.
Increase volume.
Talk
In standby mode make/
receive phone calls.
1
In standby, press and hold
to dial BT 1571.
4
When answer machine message
playing, press to replay the current
message, or press twice to skip
backward to the previous message.
Do Not Disturb
In standby, press to shortcut to
call block menu.
Handsfree
Make a handsfree call
Answer a call handsfree
Switch to handsfree during a call
Getting to know your phone
Handset buttons
Table des matières
Autres manuels BT Téléphone sans fil
BT
BT SYNERGY 3505 Manuel utilisateur
BT
BT Freelance XT 3500 Manuel utilisateur
BT
BT RELATE SMS Manuel utilisateur
BT
BT Synergy 900 Manuel utilisateur
BT
BT BT3960 Manuel utilisateur
BT
BT 3710 Manuel utilisateur
BT
BT LYRIC 2100 Manuel utilisateur
BT
BT Digital Cordless Telephone Manuel utilisateur
BT
BT Freestyle 750 Manuel utilisateur
BT
BT DIVERSE 7150 Manuel utilisateur
BT
BT BT DIVERSE 5100 Manuel utilisateur
BT
BT STRATUS 1500 Manuel utilisateur
BT
BT DIVERSE 3010 EXECUTIVE Manuel utilisateur
BT
BT Freelance XC 500 Manuel utilisateur
BT
BT QUARTET 1500 Manuel utilisateur
BT
BT GRAPHITE 1100 Manuel utilisateur
BT
BT ON-AIR 1300 EXECUTIVE Manuel utilisateur
BT
BT Lyric 1100 Manuel utilisateur
BT
BT Studio 4500 Plus Manuel utilisateur
BT
BT ZENITH FLIP Manuel utilisateur
