1.0
Web Guiding System EDV No.:MD.066.01.01 Chapter: 1.0
EKR 1500 with CCD 30000 / CCD 5000M Date: 05.11.99 Page: 1/4
Please follow the instruction of
start-up, maintenance and installation
as descripted in the operating instruction
1. Description
1.1 General
The EKR 1500 system is a microprocessor-controlled amplifier.
With the CCD-cameras 30000 and 5000M this amplifier could be used for:
- web edge guiding (right or left)
- center line guiding
Please contact the producer for any different application.
The amplifier has PLC-compatible inputs and also an ‘OK-relay’ with NO and NC contact.
Full integration into the machine control system via:
- I-O Module potential-free in- and outputs for extended PLC messages and
commands
- Intercon-Module direct, serial connection for integration of system results,
messages and commands into the machine control system.
- Interbus-S Module direct connection to Interbus-S Module as remote bus station
- Profibus-DP module for instantaneous communication with locally peripheral
equipment
Notice: Please find the connection plans of the nominated modules at the corresponding
operating instructions.
1.2 General plan
The general plan (annex 2 and 3) indicates the connectable edge sensors and components to the
amplifier.
1.3 Operating elements
The amplifier includes all necessary operating elements.
Option: - Remote control by external signals, sensors or keys.
Attention! External keys will interlock the reverse funktion keys at the amplifier.
- If system locking is desired (e. g., in case of machine stop), this can be achieved
by means of external contacts or signals from the PLC.
Connection of components via separated terminal compartment.
Advantage: Quick and easy accessibility to the terminal parts.
Indication of web edge position by two LED arrays
Advantage: - simple control of the web edge within the measuring range of sensors
- simple adjustment of the desired position of the web or edge sensors
- variations of web width exceeding via the admissible value
