Brother BAS-416A Manuel

Changing the color change potentiometer

With the power to the machine turned off. Remove the old color change

potentiometer by loosening the two outer setscrews of the color change collar.

These are the ones closest to the potentiometer. Then slide the color change

potentiometer out of the collar and the machine. You may have to rotate the color

change collar to get to both outer setscrews.

Unplug the old color change potentiometer by following the cable out of the

potentiometer and unplugging from the connector located on the thread tension

connector. You will also need to remove any cable ties or clips to remove the

potentiometer from the machine. Please make a note of their location so that

after installing the new one they go back in the same place.

B

BA

AS

S-

-4

41

16

6A

A

&

&

4

42

23

3A

A

B

BE

ES

S-

-1

12

21

10

0

&

&

1

12

23

30

0

For Technical Assistance Please Call Toll Free 1-877-4BROTHER

Thread tension connector

Potentiometer connector

Potentiometer

Setscrews

Color change collar

Potentiometer

Remove the mounting bracket from the old color change potentiometer with a

wrench and install on the new potentiometer in the same orientation as the old

one.

Plug the new color change potentiometer connector into the thread tension

bracket connector but do not install the potentiometer onto the machine.

Turn on power to the machine.

Press the Needle Select button to display the needle bar selection screen.

Turn the color change collar to move the needle bar case to where it is

positioned between needles 1 and 2 as illustrated.

Turn the shaft of the color change potentiometer so that needles 1 and 2 are

flashing on the needle bar selection screen.

Mounting Bracket

Now turn the shaft counterclockwise very slowly until just 2 is flashing.

Install the new color change potentiometer onto the machine by inserting the

shaft in to the color change collar and also that the mounting bracket goes into

the slot. Make sure not to turn the shaft while inserting it into the machine. Then

tighten the two outer setscrews to hold it into position. If you have to rotate the

collar to get to the second setscrew, make sure that one is tightened before

rotating.

Slowly rotate the color change collar counterclockwise so that needle 2 is still

displayed and that the “N” changes to an “O” on the needle bar selection screen

that is displayed on the right of the screen. This “O” means that the machine is

directly on needle number 2.

Check to make sure that the needle the machine is on matches the needle

displayed by color changing with the arrow keys and checking all the needles.

Press the End key when done.

Make sure to reinstall any wire ties or clips that hold the wire of the potentiometer

and you are finished.

Setscrews

Color change collar

Potentiometer

Slot

Autres manuels pour BAS-416A

1

Ce manuel convient aux modèles suivants

5

Table des matières

Autres manuels Brother Machine à coudre

Brother

Brother PR-600 Manuel

Brother

Brother BAS-341F Manuel utilisateur

Brother

Brother CX155LA Manuel utilisateur

Brother

Brother Innov-is 2500D Manuel utilisateur

Brother

Brother S-7300A Manuel utilisateur

Brother

Brother Innov-is NV55P Manuel utilisateur

Brother

Brother LS-2125i Manuel utilisateur

Brother

Brother S-7200B Manuel utilisateur

Brother

Brother 888-X53 Manuel utilisateur

Brother

Brother BAS-415 Manuel utilisateur

Brother

Brother XL5300 Manuel utilisateur

Brother

Brother LT2-8841 Manuel utilisateur

Brother

Brother PE430 Manuel utilisateur

Brother

Brother S-7000DD Manuel utilisateur

Brother

Brother DA-9280 Manuel utilisateur

Brother

Brother PR-1000 Manuel utilisateur

Brother

Brother EX-660 Manuel utilisateur

Brother

Brother DB2-B791 Manuel utilisateur

Brother

Brother Serger 1034D Manuel utilisateur

Brother

Brother DB2-B736 Manuel utilisateur

Brother

Brother 4234DT Manuel utilisateur

Brother

Brother LS-2000 Manuel utilisateur

Brother

Brother BM2800 Manuel utilisateur

Brother

Brother EF4-B956C Manuel utilisateur

Manuels Machine à coudre populaires d'autres marques

Riccar

Riccar RL634DE Manuel utilisateur

Singer

Singer 2517 Manuel utilisateur

Pfaff

Pfaff 3307-1 SERIES Manuel utilisateur

Janome

Janome Quilt Maker Pro 18 VERSA Manuel utilisateur

Siruba

Siruba C007JP Manuel utilisateur

Husqvarna Viking

Husqvarna Viking Designer SE Manuel utilisateur

Singer

Singer 148-5 Manuel utilisateur

IKEA

IKEA SY Manuel utilisateur

Pfaff

Pfaff 571 Manuel utilisateur

Singer

Singer 15-91 Manuel utilisateur

Pegasus

Pegasus WT100 Series Manuel utilisateur

Reliable

Reliable 7100DB Manuel utilisateur

Pfaff

Pfaff 937 Manuel utilisateur

Singer

Singer 6038 Manuel utilisateur

Singer

Singer 413K Manuel utilisateur

Pfaff

Pfaff 1471 E1 Manuel utilisateur

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuel utilisateur

HIGHLEAD

HIGHLEAD GC2008-M Manuel utilisateur