Brother HL-1060 Series Manuel utilisateur

English: HL-1060 Quick Setup Guide, Cover Page I

Laser Printer HL-1060 Series

Quick Setup Guide

Read this guidebook first to set up your printer and

prepare your computer for the printer.

Save all packing materials and outer carton. They

are useful when shipping the printer.

The product names in this guidebook are trademarks or registered trade marks of each manufacturer. The specifications

are subject to change without notice.

English: HL-1060 Quick Setup Guide, Cover Page II

English: HL-1060 Quick Setup Guide, Body

Action 1: Check the Supplied Items

After taking the printer out of the carton and removing the packing materials, make sure that

the following items are not damaged and none are missing:

• Printer • Paper supports

• Drum unit assembly (with Toner cartridge

included)

• 3.5” floppy disks for Windows® printer driver and fonts

• Quick setup guide (this guidebook)

• User’s guide

• Plastic Bag (for transporting the drum unit assembly)

• Dust cover

NOTE

You will need to purchase an interface cable that matches the bi-directional IEEE 1284

compliant interface of your computer. If you do not know what cable you need, consult your

dealer.

English: HL-1060 Quick Setup Guide, Body

Action 2: Install the Toner Cartridge/Drum Unit

1Unpack the drum unit assembly with the

toner cartridge included. Gently shake it

from side to side five or six times.

CAUTION

Do not expose the drum unit to light for

longer than a few minutes, as this will

damage the drum.

CAUTION

Do not remove the starter sheet.

This sheet will be ejected while the printer

is warming-up after installing a new drum

unit. (See Action 5 Illustration 4)

2Open the top cover of the printer.

3Holding the drum by its handles, install it

into the printer. The drum will slide easily

into place.

Starter Sheet

English: HL-1060 Quick Setup Guide, Body

4Close the top cover.

See “CHAPTER 5 MAINTENANCE” in

the User’s Guide for more information

about replacement of the toner cartridge.

English: HL-1060 Quick Setup Guide, Body

Action 3: Load Paper into Your Printer

The printer has two multi-purpose sheet feeders. The feeders can handle paper

within the following specifications. Load paper in each feeder, referring to the

following tables:

❏ Feeder 1, front

Paper Type Paper Size

Cut sheets A4, Letter, Legal, B5, A5, A6, 3”x 5”, Executive, Custom size

(70-216 x 127-356 mm)

Envelopes DL, C5, COM-10, Monarch, 9” x 12”, C4

Post Card 70-216 x 127-356 mm

Organizer Day-Timer®J, K, L, M, 70-216 x 127-356 mm

Labels and

Transparencies 70-216 x 127-356 mm

❏ Feeder 2, rear

Paper Type Paper Size

Cut sheets A4, Letter, Legal, B5, Executive

See “CHAPTER 2 PAPER HANDLING” in the User’s Guide for more information.

1. Load paper into Sheet Feeder 2

1Install the paper support onto the rear

multi-purpose sheet feeder 2.

PULL

HERE TO

INSERT PAPER

Open the cover of the multi-purpose sheet

feeder 2.

English: HL-1060 Quick Setup Guide, Body

3Pushing and sliding the tabs, move the paper

guides horizontally to the widest position.

4Load paper in the multi-purpose sheet

feeder 2 with the printing surface face

down.

NOTE

The feeder can hold up to 200 sheets of

plain paper. Excessive sheets may cause

paper jams. Make sure that the paper is

stacked below the ▲mark.

5Pushing and sliding the tabs, move the paper

guides to fit the paper width.

CAUTION

Failure to set the paper guide to the paper

width may cause paper skew and jams.

PULL

HERE TO

INSERT PAPER

Close the cover of the multi-purpose sheet

feeder 2.

English: HL-1060 Quick Setup Guide, Body

2. Load paper into Sheet Feeder 1

1Install the paper support onto the front

multi-purpose sheet feeder 1.

PULL

HERE TO

INSERT PAPER

Open the cover of the multi-purpose sheet

feeder 1.

3Pushing and sliding the tabs, move the paper

guides horizontally to the widest position.

4Load paper in the multi-purpose sheet

feeder with the printing surface face down.

NOTE

The feeder can hold up to 200 sheets of

plain paper or up to 10 envelopes.

Excessive sheets may cause paper jams.

Make sure that the paper is stacked below

the ▲mark.

English: HL-1060 Quick Setup Guide, Body

5Pushing and sliding the tabs, move the paper

guides to fit the paper width.

CAUTION

Failure to set the paper guide to the paper

width may cause paper skew and jams.

PULL

HERE TO

INSERT PAPER

Close the cover of the multi-purpose sheet

feeder 1.

7Open the output tray. ( ①)

Extend the extension support wire. ( ②)

NOTE

You can remove and install the front feeder 1 to clear paper jams as shown in the illustrations

below. For more information, see “PAPER JAMS” in Chapter 6 of the User’s Guide.

1. Remove Feeder 1. 2. Install Feeder 1.

English: HL-1060 Quick Setup Guide, Body

Action 4: Connect Your Printer to Your Computer

You must connect the printer to your computer with a suitable interface cable. A bi-directional

IEEE 1284 compliant parallel cable should be used for this connection, unless you are using

the optional serial interface board.

1Make sure that the printer power switch is

off before connecting or disconnecting the

interface cable.

Also, make sure that the computer is turned

off.

2Connect the parallel interface cable (printer

cable) to the parallel interface port of the

printer. ( ①)

Secure the connection with the wire clips.

( ②)

Connect the interface cable to the printer

port of the computer.

NOTE

The printer can also operate with an RS-232C/RS-422A serial interface by installing the

optional serial interface board. For more information, see “CHAPTER 4 OPTIONS” in the

User’s Guide.

For the location of your computer’s parallel (or serial, if you are using the optional interface

board) printer port, refer to the User’s Guide of your computer.

Autres manuels pour HL-1060 Series

Table des matières

Autres manuels Brother Imprimante

Brother

Brother HL-5040 Manuel utilisateur

Brother

Brother GT-3 Series Manuel utilisateur

Brother

Brother DCP-J132W Manuel utilisateur

Brother

Brother HL-L8250CDN Manuel utilisateur

Brother

Brother m-PRINT MW-120 Manuel utilisateur

Brother

Brother VC-500W Manuel utilisateur

Brother

Brother GTX600SB Guide de l'utilisateur

Brother

Brother HL-5340D Manuel utilisateur

Brother

Brother HL-5040 Manuel utilisateur

Brother

Brother DCP-7055 Manuel utilisateur

Brother

Brother DCP-9040CN Manuel utilisateur

Brother

Brother MFC-J775DW Manuel utilisateur

Brother

Brother HL-2460 Series Manuel utilisateur

Brother

Brother DCP-1610WE Manuel utilisateur

Brother

Brother HL-4150CDN Manuel utilisateur

Brother

Brother DP-550CJ Manuel utilisateur

Brother

Brother DCP-L3517CDW Manuel utilisateur

Brother

Brother DCP-145C Manuel utilisateur

Brother

Brother m-PRINT MW-260 Manuel utilisateur

Brother

Brother HL-2400C Series Manuel utilisateur

Brother

Brother HL-3450CN Series Manuel utilisateur

Brother

Brother HL-3140CW Manuel

Brother

Brother HL-2400C Series Manuel utilisateur

Brother

Brother P-Touch QL-500 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur