Brother GTX600NB Guide de l'utilisateur

GTX600NBProfessional Use

GARMENT PRINTER

Setup Manual

Please be sure to read this manual before using this product.

Keep this manual in a safe place for future use.

This printer should only be used by operators who are

appropriately trained in its safe operation.

Please be sure to read "SAFETY INSTRUCTIONS" before use.

Installation 1

Setup of the printer 5

Connection to a PC 27

Adjustment 32

Maintenance list 35

Table of contents

SAFETY INSTRUCTIONS

Thank you very much for buying a BROTHER printer. Before

using your new printer, please read the "SAFETY

INSTRUCTIONS" and handling instructions carefully.

SAFETY INSTRUCTIONS

1. Safety indications and their meanings

This instruction manual and the indications and symbols that

are used on the printer itself are provided in order to ensure

safe operation of this printer and to prevent accidents and

injury to yourself or other people.

The meanings of these indications and symbols are given

below.

Indications

DANGER

The instructions which follow this

term indicate situations where

failure to follow the instructions

will result in death or serious

injury.

WARNING

The instructions which follow this

term indicate situations where

failure to follow the instructions

could result in death or serious

injury.

CAUTION

The instructions which follow this

term indicate situations where

failure to follow the instructions

may result in minor or moderate

injury.

IMPORTANT

The instructions which follow this term

indicate situations where failure to follow

the instructions may result in damage to

property.

NOTE

The instructions which follow this term

indicate precautions and restrictions for

use.

Symbols

This symbol ( ) indicates something that you

should be careful of. The picture inside the triangle

indicates the nature of the caution that must be

taken. (For example, the symbol at left means

"beware of injury".)

This symbol ( ) indicates something that you

must not do.

This symbol ( ) indicates something that you

must do. The picture inside the circle indicates the

nature of the thing that must be done. (For

example, the symbol at left means "you must make

a ground connection".)

2. Notes on safety

DANGER

Contact with high voltage sections may lead to a

serious injury. Turn off the power, and remove the

cover 5 minutes later.



WARNING

Basic precautions



This printer should only be used by operators who

are appropriately trained in its safe operation.

The printer is not suitable for use in places where

children are present.



To prevent accidents and problems, do not modify

the machine yourself. Brother will not be held

responsible for any accidents or problems resulting

from modifications made to the machine.

Do not handle the power cord with wet hands.

Otherwise, it may cause electric shocks.

Installation



Do not set up the printer in a dusty environment. If

dust collects inside the printer, it may cause fire or

electric shocks or problems with correct operation.



Be sure to connect the ground. If the ground

connection is not secure, you run a high risk of

receiving a serious electric shock, and problems

with correct operation may also occur.

Do not bend the cords excessively or fasten them

too hard with staples or anything similar to secure

cords. Otherwise it may cause fire or electric

shocks.

Do not connect power cords on the floor near the

printer.

Water dripping from the printer may cause fire,

electric shocks, or problems.

Printing

If a foreign object gets inside the printer,

immediately turn off the power, disconnect the

power cord, and contact the place of purchase or a

qualified technician. If you continue to use the

printer while there is a foreign object inside, it may

result in fire or electric shocks or problems with

correct operation.

Do not allow the printer to come into contact with

liquids. Otherwise it may cause fire or electric

shocks or problems with correct operation.

If any liquid gets inside the printer, immediately

turn off the power, disconnect the power cord, and

contact the place of purchase or a qualified

technician.

iii

SAFETY INSTRUCTIONS

WARNING

Printing

Do not use the printer when smoke or a bad odor is

coming from the printer. Otherwise it may cause

fire or electric shocks or problems with correct

operation. Immediately turn off the power,

disconnect the power cord, and contact the place

of purchase or a qualified technician.

Keep your finger or any body part away from the

rotating fan. Otherwise it will be caught up, which

results in injuries.

Turn off the power when you approach the fan.

CAUTION

Environmental requirements

Use the printer in a place which is adequately

ventilated. A slight odor is generated when the

printed articles are being fixed by heat.

Installation

The printer machine weighs 730 kg (1609 lb).

Transporting and setting up of the printer should be

held in the proper way. Otherwise, the printer may

topple over and cause injury.

Unplug the printer and contact the dealer where

you purchased the printer or a trained technician if

the printer topples over. If you continue to use it, it

may result in fire or electric shocks or poor printing

quality.

Do not set up the printer in a place where it will be

affected by vibration. Otherwise the printing quality

may be degraded or the printer may topple over,

which causes injury or results in failure of the

printer.

Do not connect the power cord until installation is

complete. The printer may operate if the power is

turned on by mistake, which could result in injury.

Do not climb onto the printer or place heavy

objects on top of it. You may get injured if it

becomes unbalanced and tips over.

Printing

This printer should only be used by operators who

are appropriately trained in its safe operation.

Ensure there is adequate space left in front of the

printer and avoid placing any objects. Otherwise

your hand may get caught between the platen and

an object, which may result in injury.

Do not handle the platen while printing. If your

hand gets caught between the platen or the T-shirt

tray and the covers, it may be injured.

Do not put your hands inside the covers while the

printer's power is turned on. Otherwise your hands

may touch against moving parts and this may

result in injury.



CAUTION

Printing

When the pretreatment is applied to printed

objects (like a T-shirt) with a spray or pretreatment

applicator, sprayed mist is generated. So wear a

pair of plastic gloves, a mask and protective

glasses (or goggles) designed to shield against

liquid splash, and fully take care of the air

ventilation when you are working with it.

When a problem occurs with the operation of the

printer, contact the place of purchase or a qualified

technician.

Be careful not to put your hands in the clearance

of the cover of the lifting up/down mechanism.

Doing so may cause injury.

Maintenance

Be careful not to pinch your fingers when closing

each cover. You may get injured if you pinch your

fingers.

When you mount or replace the head, be careful

not to get your hands or fingers caught. Otherwise

you may be injured.

Do not drink liquids such as the ink, maintenance

solution, cleaning solution, pretreatment, or waste.

They may cause diarrhea or vomiting.

When handling liquids such as the ink,

maintenance solution, cleaning solution,

pretreatment or waste, be sure to wear protective

glasses and gloves so that it does not get into your

eyes or onto your skin.

It may cause inflammation. In case of contact with

eyes, do not rub but immediately rinse the eyes

with water.

Keep the liquids out of the reach of children.

Be sure to wear protective goggles and gloves

when handling the grease, so that it does not get

into your eyes or onto your skin.

It can cause inflammation. Do not drink or eat the

grease. It may cause diarrhea or vomiting.

Keep the liquids out of the reach of children.

When replacing parts and installing optional

accessories, be sure to use only genuine Brother

parts. Brother will not be held responsible for any

accidents or problems resulting from the use of

non-genuine parts.

When replacing parts or installing optional

accessories, be sure to follow the procedures

described in the Instruction Manual. Incorrect

procedures could cause injuries or problems.

Follow the corresponding instructions in the

manual when you put your hands inside the cover

during regular maintenance while the power is

turned on.

SAFETY INSTRUCTIONS

IMPORTANT

Printing



Do not move the platen by hand. Otherwise the

printer may be mechanically and electrically

damaged.

Ensure there is adequate space left in front of the

printer and avoid placing any objects. The platen

may be hit and damaged.

NOTE



Use the printer in an area which is free from

sources of strong electrical noise such as electrical

line noise or static electric noise. Sources of strong

electrical noise may cause problems with correct

operation.

Any fluctuations in the power supply voltage should

be within ±10% of the rated voltage for the printer.

Voltage fluctuations which are greater than this

may cause problems with correct operation.

The power supply capacity should be greater than

the requirements for the printer's power

consumption. Insufficient power supply capacity

may cause problems with correct operation.

In the event of an electrical storm, turn off the

power and disconnect the power cord from the wall

outlet. Lightning may cause problems with correct

operation.

The names of operating systems described in the main context

of this manual are abbreviated. Product names used in this

manual are, in general, trademarks or registered trademarks of

their respective developer or manufacture. However, in this

manual, the ® marks or TM marks are not used.

Brother logo is registered trademark of Brother Industries, Ltd.

Apple, Macintosh, Mac OS, iOS, OS X, macOS, Safari, iPad,

iPhone, iPod and iPod touch are the trademarks or registered

trademarks of Apple Inc. in the United States and other

countries.

The official name of Windows®10 is Microsoft® Windows®10

operating system. (represented as Windows 10 in this manual)

Microsoft®and Windows®10 are trademarks and registered

trademarks of Microsoft Corporation in the United States of

America and other countries.

Other product and company names mentioned herein may be

the trademarks or registered trademarks of their respective

owners.

Information in this document and the specifications of this

product are subject to change without notice.

Downloadable from: https://www.brother.com

3. Warning labels

This printer has the following warning labels displayed on it.

Follow the precautions given on each warning label for your

work.

When the label is peeled off or illegible, contact the place of

purchase.

14

35

X1015

Waste ink tank Ink bottle

9 L

Waste water

tank

Pretreatment

5 kg (11 lb)

Pretreatment

20 kg (44 lb)

Ink bottle

18 L

Cleaning solution bottle

9 L Cleaning solution bottle

18 L

Pretreatment

200 kg (440 lb)

vii

SAFETY INSTRUCTIONS

viii

Required Tools

Phillips screwdriver: M3 to M5

Disassembling

1) Remove the Cover of BACK SIDE bottom center.

2) Remove the Lithium Battery (1) by pulling out the holder in

the direction of the arrow.

3) Pickup the Lithium Battery (1) to the direction of the arrow.

(1)

(

)

Note based on California law (USA) on the

use and handling of Perchlorate

This product contains a CR Coin Lithium Battery which

contains Perchlorate Material – special handling may

apply.

See

http://www.dtsc.ca.gov/hazardouswaste/perchlorate.

Installation

IMPORTANT

The ink bottle for use in the initial installation

should be sent in advance to the location where

the printer is to be installed and stored indoors.

*If you use ink at extremely low temperature

when the outside temperature is low or in the

cold season, the ink becomes hard to flow

during ink installation.

The following environmental requirements should be met:

Environment Temperature Humidity

Humidity (%) 0°C (32°F) to

40°C (104°F) 20 % to 85 %

(no condensation)

Working

Environment*1

10°C (50°F) to

35°C (95°F)

Recommended

Print Environment*2 18°C (64.4°F)

to 30°C (86°F)

35% to 85 %

(no condensation)

Electrical

Requirements Power Power

Consumptions

―

Single-phase

200-240 V,

50/60 Hz

5 A max.

*1: Environmental range where the printer can be operated.

*2: Environmental range where sufficient printing quality can be

secured.

X1016

Checking the installation site

116.5 in. (296 cm)

or more

31.5 in. (80 cm)

or more

129.5 in. (329 cm)

or more

15.7 in. (40 cm)

or more

31.5 in. (80 cm)

or more

17.7 in. (45 cm) or more

Autres manuels pour GTX600NB

Table des matières

Autres manuels Brother Imprimante

Brother

Brother HL-1660e Series Manuel utilisateur

Brother

Brother HL-2270DW Guide d'installation

Brother

Brother HL-2595DW Manuel utilisateur

Brother

Brother MFC-L2710DW Manuel utilisateur

Brother

Brother PT-E550W Instructions d'installation

Brother

Brother MPRINT MW-260MFi Manuel utilisateur

Brother

Brother DCP-L3560CDW Manuel utilisateur

Brother

Brother DCP-J515W Instructions de montage

Brother

Brother mfc-j947dw Manuel utilisateur

Brother

Brother PT 1000 - P-Touch 1000 B/W Thermal Transfer... Manuel de la liste des pièces

Brother

Brother HL-2400C Series Manuel utilisateur

Brother

Brother MFC7840CW Mode d’emploi

Brother

Brother HL-L2300 Manuel utilisateur

Brother

Brother 2600CN - HL Color Laser Printer Manuel utilisateur

Brother

Brother MFC-J5520DW Manuel utilisateur

Brother

Brother HL-6050 Manuel utilisateur

Brother

Brother MFC-J4620DW Manuel d'utilisation et d'entretien

Brother

Brother MFC490CW - Color Inkjet - All-in-One Mode d’emploi

Brother

Brother ep44 Manuel utilisateur

Brother

Brother HL-2460 Series Manuel utilisateur

Brother

Brother HL-1660e Series Manuel utilisateur

Brother

Brother GTX-4 Manuel utilisateur

Brother

Brother P-touch Embellish ELITE PT-P715eBT Manuel utilisateur

Brother

Brother P-Touch QL-500 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur