Brother LX-1200 Manuel utilisateur

LC0075001

Printed in China/Imprimé en Chine

9906 ENGLISH/FRENCH ®

Owner’s Manual

- 0 -

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection

against harmful interference in a residential installation.This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between equipment and receiver.

-Connectthe equipmentintoanoutletonacircuit differentfromthat towhichthereceiver isconnected.

-Consult the dealer or an experienced radio/TVtechnician for help.

This equipment has been certified to comply with FCC standards, which are applied to the U.S.A.

only.

Changes ormodifications notexpressly approved by Brother Industries, Ltd. could void the user’s

authority to operate the equipment.

Statement

Under the terms of an agreement with Xyron, Inc., the purchase or other acquisition of this product

confers no right or license to use the product inthe Retroreflective Field.

- 1 -

Brother Cool Laminator LX-1200

Fax-Back System

Brother Customer Service has installed an easy-to-use Fax-Back System, so you can get instant answers to

common technical questions and product information for all Brother products. This system is available 24

hours a day, 7 days a week. You can use the systemto send faxes to any fax machine, not just the one from

which you are calling.

If you can’t resolve a difficulty with your laminator using this manual, call our Fax-Back System, and follow

the voice prompts to receive faxed instructions about using thesystem and an index of Fax-Back subjects.

USA: 1-800-521-2846

Brother on the World Wide Web

You can find more information about Brother products, from product specification sheets to Frequently

Asked Questions (FAQs), on the World Wide Web. Visit us at

http://www.brother.com

For Customer Service

USA: 1-877-BROTHER (276-8437) (voice)

or 1-901-379-1010

1-901-379-1210 (fax)

Corporate Headquarters

Brother International Corporation

100 Somerset Corporate Boulevard

Bridgewater, NJ 08807-0911 USA

Service Center Locations

If you need a local service center, please call 1-800-284-HELP (4357) to locate the authorized service

center near you.

Note:

Be sure to call the Service Center before your visit. Service Centers do notprovide operational assistance.

- 2 -

Ordering Accessories and Supplies (in the USA)

For best quality results use only genuine Brother accessories, available at most Brother retailers. If you

cannot find the accessory you need and you have a Visa, MasterCard, Discover, or American Express credit

card, you can order accessories directly from Brother. (In the USA, you can visit us online for a complete

selection of Brother accessories and supplies available for purchase or you may order supplies and

accessories by mail using theorder form on page 3.)

USA: 1-888-879-3232 (voice)

1-800-947-1445 (fax)

http://www.brothermall.com

Description Model Number Price Each

Double-side Laminate

12”wide filmcartridge (About 39.3m/128.9ft.long) LC-D12 $129.99

12”wide refill roll (About 39.3m/128.9ft long) LC-D12R $89.99

9”wide film cartridge (About 20m/65.6ft.long) LC-D9 $40.99

9”wide refill roll (About 20m/65.6ft.long) LC-D9R $31.99

4.8”wide filmcartridge (About 20m/65.6ft.long) LC-D5 $32.99

4.8”wide refill roll (About 20m/65.6ft.long) LC-D5R $25.99

Adhesive With Laminate

12”wide filmcartridge (About 10m/32.8ft.long) LC-A12 $104.99

12”wide refill roll (About 10m/32.8ft.long) LC-A12R $89.99

9”wide film cartridge (About 20m/65.6ft.long) LC-A9 $72.99

9”wide refill roll (About 20m/65.6ft.long) LC-A9R $55.99

4.8”wide filmcartridge (About 20m/65.6ft.long) LC-A5 $48.99

4.8”wide refill roll (About 20m/65.6ft.long) LC-A5R $42.99

Magnetic Back Laminate

9”wide film cartridge (About 4m/13.1ft.long) LC-M9 $133.99

9”wide refill roll (About 10m/32.8ft.long) LC-M9R $174.99

4.8”wide filmcartridge (About 4m/13.1ft.long) LC-M5 $83.99

4.8”wide refill roll (About 10m/32.8ft.long) LC-M5R $109.99

Other Accessories

Replacement Ceramic Side Cutters (2 blades) SC-2 $13.99

Replacement Corner Cutter Trimmer Tray CC-3 $29.99

- 3 -

Accessory order form

This order form is provided for your convenience should your retailer not stock the item(s) needed.

Item Description Price Each Quantity Total

To complete the Order Form:

1. Review the Accessory List on the preceding pages

and select the desired items.

2. Complete the above form, indicating the quantity of

each item.

3. Total the columns and enter the total on the

“Supply/Accessory Subtotal” line.

4. Add the appropriate Sales Tax and Shipping /

Handling Charge.

5. Put the total on the “Total Due” line.

6. Clearly print your name and address below.

7. Send the Order Form, along with proper payment to

the address below.

Credit Card Holders

Order 7 days a week / 24 hours a day

PHONE: 1-888-879-3232

FAX: 1-800-947-1445

ON LINE: http://www.brothermall.com

Send Order Form To:

Brother International Corp.

Attn: Consumer Accessory Div.

P.O.Box 341332

Bartlett, TN 38184-1332

Name:

Address:

City:

State: _____________________ Zip:

Daytime Phone #:

Daytime Fax #:

Prices are subject to change without notice.

Supplies and Accessories Subtotal: $______________

AZ, CA, CO, CT, FL, GA, IL, LA, MA, MD, MI, MN,

MO, NC, NJ, NV, NY, OH, PA, TN, TX, VA, WA

residents add applicable sales tax: $

Shipping and Handling Options: $

Please choose one:

Standard Freight:

Continental U.S. ($5.00) Alaska & Hawaii ($8.75) Canada,

GU, PR, VI ($15.00)

nd Day Air Freight (Continental U.S. only): ($8.75)

* For all other overseas orders, fax this form to us at

1-901-384-8184 for a quote based on weight

Total Due $______________

Method of Payment (check one)** No C.O.D.orders **

( ) Visa ( ) MasterCard ( ) Discover ( ) American Express

( ) Check / Money Order

Account Number ________________________________________

Expiration Date _________________________________________

Signature _______________________________________________

- 4 -

Table of Contents

Getting started................................................................................................................................................ 5

Features.......................................................................................................................................................... 5

Precautions..................................................................................................................................................... 6

Package list..................................................................................................................................................... 7

Part names...................................................................................................................................................... 8

Outside of the machine............................................................................................................................... 8

Inside of the machine.................................................................................................................................. 8

Control Panel.............................................................................................................................................. 9

Film Cartridge............................................................................................................................................. 9

Setup............................................................................................................................................................. 10

Turning the machine on/off....................................................................................................................... 10

About Auto Power Saver........................................................................................................................... 10

Operating the machine.................................................................................................................................. 11

Document Size.............................................................................................................................................. 14

The Auto Sheet Feeder............................................................................................................................. 15

The Auto Cross Cutting System................................................................................................................ 15

Howto define the cutting position (creatingborders).................................................................................... 16

Auto Cutter Mode - Border........................................................................................................................ 16

Auto Cutter Mode - No Border.................................................................................................................. 16

Auto Cutter Mode - Cutter Off (for sensitivedocuments).......................................................................... 16

Auto Cutter Mode - Extra Border.............................................................................................................. 17

Howto use Continuous mode....................................................................................................................... 18

Manual feeding and manual cutting.............................................................................................................. 20

Corner cutting............................................................................................................................................... 21

Corner cutter dust box.............................................................................................................................. 22

About film rolls .............................................................................................................................................. 23

Film-supply maintenance.......................................................................................................................... 23

Replacing the film cartridge .......................................................................................................................... 24

Installing/replacing the film roll in the cartridge............................................................................................. 26

Using 9”(A4) or 4.8”(A6) film cartridges...................................................................................................... 30

Regular maintenance and troubleshooting.................................................................................................... 33

Regular maintenance................................................................................................................................ 33

Paper jams................................................................................................................................................ 33

Replacing theside cutter units.................................................................................................................. 36

Replacing the corner cutter trimmer tray................................................................................................... 38

Troubleshooting............................................................................................................................................. 39

Specifications................................................................................................................................................ 40

Index ............................................................................................................................................................. 41

- 5 -

Getting started

Thank you for purchasing a Brother Cool Laminator. This machine has been designed to be easy to use, but

can be utilized to its fullest potential by taking some time to read this owner’s manual.

Features

•Depending upon the type of film used, this machine turns a variety of documents into professional, self-

adhesive stickers, dual-sided, coated lamination sheets, magnetic signs etc.

•In addition to output from computers and word processors, you can laminate hand-written sheets,

clippings from magazines, photographs or any other type of document.

•Your documents are perfectly coated to protect them from water, dust, tearing, yellowing, and to create a

professional, high quality finish.

•No heat is used. The unique cold pressure method and specially formulated adhesives make the

operation safe, easy and fast.

•You can start laminating immediately after turning the power on (no warm-up time is necessary).

•This machine has an auto sheet feeder and auto cross cutting mechanism. It automatically detects the

width and length of your document and precisely trims the excess laminate from your square or

rectangular finished documents.

•The film is easily installed and replaced.

•The LX-1200 supports document widths of up to 11.7”(A3 - 297mm).

- 6 -

Precautions

To avoid personal injury or damage to the machine, please pay close attention to the CAUTION and

WARNING notices in this manual. They are here for your safety, as well as to point out actions that might

cause damage to your machine.

WARNING:

-Do not attempt to repair or disassemble this equipment yourself. The warranty will be voided if

this machine is not repaired by authorized service personnel.

-Do not touch the blades inside of the machine.

-Use only the AC adapter that was supplied with the machine. Using the wrong AC adapter may

damage the machine and will void the warranty.

CAUTION:

-Do not pull the power cord. To disconnect it, always grasp the plug itself.

-Do not place the machine under direct exposure to sunlight and other sources of heat,

excessive moisture, or dust.

-If any liquid is spilled onto the machine, immediately unplug the machine from its power source

and consult with authorized service personnel.

-Unplug the machine during a lightning storm.

-Do not place heavy objects on the machine.

-Keep the back and sides of the machine clear of obstructions to prevent overheating.

-Use only a soft, dry cloth to clean the machine (do not use chemicals, solvents, or detergents).

-To avoid electrical interference, do not place the machine close to a radio receiver or television.

-Do not turn the machine off while operating except in the event of a malfunction.

-Turn the machine off in the event of a malfunction.

-If you use adhesive laminate film, do not attach the laminated output to one’s skin, or the

sensitive surface of objects.

-The laminated documents are not easily digested. Great care should be taken to prevent

accidental ingestion by infants or the elderly.

-The laminate film contains UV resistance materials. However, the color of the documents may

fade if the documents are printed with liquid type ink. Solid type ink is recommended to prevent

the document from fading.

-The laminated document may be wrinkled or damaged if it is placed under a heavy object.

-Do not place the magnetic back laminate output close to floppy disks or audio tapes. The data

on the disks or tapes may be damaged.

-Brother can not be held liable for loss or damage of items used in the laminator machine.

-Under the terms of an agreement with Xyron, Inc., the purchase or other acquisition of this

product confers no right or license to use the product in the Retroreflective Field.

-Laminating thermal paper may cause the print to fade.

-When a document is first laminated it may feel sticky to the touch. This stickiness is caused by

silicone that is used in processing the film.

-Discard the machine or laminated output according to local regulations. If you are not sure of

them, call your local Sanitation Department.

IMPORTANT OPERATIONAL PRECAUTIONS:

-Select Cutter Off Mode when laminating sensitive or irregularly shaped documents.

-Do not insert your precious and valuable items into the machine.

-Do not laminate any photograph which cannot be replaced.

- 7 -

Package list

1Machine 1

2Film cartridge 1 (Double side laminate type)

(Starter cartridge includes 13.1’or 4m of film)*

3AC adapter 1

4Owner’s manual 1

5Compatible accessory list 1

6Supplemental PC software (CD-ROM) 1

7Cartridge adapter 1

* The film cartridge is already installed into the machine.

123

456

- 8 -

Part names

Outside of the machine

DC connector Located on the left, backside of the machine. Aperture for the AC

adapter.

Top cover For replacing the film cartridge and cutter units.

Viewing window Located on the top cover. Allows you to make sure that the

correct type of film cartridge is loaded into the machine.

Document tray Where documents to be laminated are placed.

Document supporter Supports the document being laminated.

Document guide Aligns the left edge of the paper for proper document insertion.

Document tray cover Easily lifts for the removal small sized documents.

Control panel Power switch and function button area.

Document output Location where the document exits the machine.

Corner cutter slot Allows you to trim the corners of your document after laminating.

Corners of a document are automatically trimmed after insertion

into the corner cutter slot.

Corner cutter trimmer tray The corner of your laminated document is placed on this tray to

position it into the corner cutter slot.

Corner cutter dust box Collects trimmings from the corner cutter.

AC adapter Plugs into an electrical outlet and the DC connector on the

machine.

Inside of the machine

Film cartridge Contains the roll film. The label on the cartridge identifies the film

type.

You can use 12.0 inch (A3), 9.0 inch (A4) or 4.8 inch (A6) width

LC cartridges with this machine.

Roller holder lever Locks/releases the roller holder.

Roller holder Holds the roller unit.

Side cutter arm Arm for the side (vertical) cutter unit.

Side cutter units Blades for side (vertical) cutting.

Top/bottom cutter units Blades for top/bottom (horizontal) cutting.

Roller Feeds the document into the unit.

Film cartridge

Roller holder

Side cutter arm

Top/bottom cutter units Roller holder

lever

Roller

Side cutter

units

Document guide

Document supporter

Document tray

Viewing window

Corner cutter slot

Control Panel

Document output

DC connector

Top cover

Corner cutter

trimmer tray

Corner cutter dust box

Document

tray cover

Autres manuels pour LX-1200

Table des matières

Autres manuels Brother Plastifieuse

Brother

Brother LX-300 Manuel utilisateur

Brother

Brother LX-1200 Manuel utilisateur

Brother

Brother LX-570 Manuel utilisateur

Brother

Brother LX-900 Manuel utilisateur

Brother

Brother LX-180 Manuel utilisateur

Brother

Brother LX-200 Manuel utilisateur

Brother

Brother LX-1200 Manuel utilisateur

Manuels Plastifieuse populaires d'autres marques

Renz

Renz HT 330 L Manuel utilisateur

Gfp

Gfp 44TH Manuel utilisateur

Lapis

Lapis Lamina006 Manuel utilisateur

Hama

Hama L44B Manuel utilisateur

PAVO

PAVO FLORIDA Manuel utilisateur

M-Triangel

M-Triangel MT-102 Manuel utilisateur

Akiles

Akiles PROLAM 230 Manuel utilisateur

D&K

D&K Masterpiece 550 Manuel utilisateur

Falcon

Falcon F-40 Manuel utilisateur

LEITZ

LEITZ EasyLaminator A4 Manuel utilisateur

LEITZ

LEITZ coldLAM CS9 Manuel utilisateur

kala

kala Starter 1080 Manuel utilisateur

Fellowes

Fellowes Venus A3 Manuel utilisateur

Qomolangma

Qomolangma FMJ-1400-WA-PLUS Manuel utilisateur

Opus

Opus Coverator 330 Manuel utilisateur

ALDI

ALDI OL 250-L Manuel utilisateur

Phoenix

Phoenix 2700-DH Manuel utilisateur

acropaq

acropaq AL-3400 Manuel utilisateur