Brother MFC-5200C Manuel utilisateur

FACSIMILE EQUIPMENT

SERVICE MANUAL

MODEL: MFC5200C/MFC890

No part of this publication may be reproduced in any

form or by any means without permission in writing

from the publisher.

Specifications are subject to change without notice.

PREFACE

This publication is a Service Manual covering the specifications, construction, theory of operation,

and maintenance of the Brother facsimile equipment. It includes information required for field

troubleshooting and repair--disassembly, reassembly, and lubrication--so that service personnel

will be able to understand equipment function, to rapidly repair the equipment and order any

necessary spare parts.

To perform appropriate maintenance so that the facsimile equipment is always in best condition

for the customer, the service personnel must adequately understand and apply this manual.

This manual is made up of eight chapters and appendices.

SAFETY INSTRUCTIONS

CHAPTER 1 PARTS NAMES & FUNCTIONS

CHAPTER 2 SPECIFICATIONS

CHAPTER 3 INSTALLATION

CHAPTER 4 THEORY OF OPERATION

CHAPTER 5 MAINTENANCE

CHAPTER 6 DISASSEMBLY/REASSEMBLY, LUBRICATION, AND ADJUSTMENT

CHAPTER 7 MAINTENANCE MODE

CHAPTER 8 TROUBLESHOOTING

Appendix 1. Serial No. Descriptions

Appendix 2. Installation

Appendix 3. EEPROM Customizing Codes

Appendix 4. Firmware Switches (WSW)

Appendix 5. Re-packing Instructions

Appendix 6. Wiring Diagram

Appendix 7. Circuit Diagrams

This manual describes the models and their versions to be destined for major countries. The specifications

and functions are subject to change depending upon each destination.

SAFETY INSTRUCTIONS

SAFETY PRINCIPLE

1) Before starting any operations, read this manual thoroughly. Especially read the safety instructions in this

section carefully and ensure that you understand the contents.

2) Perform all the operations by following the procedures described in this manual. Follow all the cautions

and warnings set out in the procedures and on safety labels affixed to the machine. Failure to do so may

result in human injury or equipment damage.

3) Perform only the procedures explained in this manual. Refrain from opening or touching any portions that

are not related to your required operation(s).

4) Repair and replacement of parts should be performed by trained and qualified persons only.

Operators should not attempt to do such repair or replacement work.

5) It must be appreciated that the above-mentioned cautions and warnings do not cover everything because it

is impossible to evaluate all the circumstances of repair situations.

SPECIAL SAFETY INFORMATION

Cautions and warnings are made clear by following the 'Safety Alert Symbols' or 'Signal Words' such as

DANGER, WARNING and CAUTION.

1) SAFETY ALERT SYMBOL

This is the safety alert. When you find this symbol placed on the equipment or marked in this manual, be

aware of the potential of human injuries. Follow the recommended precautions and safety operation

practices.

2) Understanding Signal Words

DANGER is used to indicate the presence of a hazard which will cause severe human injuries or a fatal

accident if the warning is ignored.

WARNING is used to indicate the presence of a hazard or unsafe practices which may cause severe

human injuries or a fatal accident if the warning is ignored.

CAUTION is used to indicate the presence of a hazard or unsafe practices which may cause minor human

injuries if the warning is ignored. CAUTION also calls your attention to safety messages in this manual.

3) Follow Safely Instructions

Carefully read all the safety messages set out in this manual and also in the safety warning signs placed

on the equipment. In this manual, the safety instructions (safety alert symbols and signal words) are

enclosed in a rectangular enclosure to bring them to your attention.

Keep the safety signs on the equipment in good condition and ensure none are missing or damaged.

Replace the safety signs if unreadable or damaged. Learn how to operate the equipment and how to use

the controls properly. Do not let anyone operate this equipment without following the instructions. Keep

the equipment in proper working condition.

Unauthorized modification to the equipment may impair the function & safety and affect the life of the

equipment.

Listed below are the various kinds of "WARNING" messages contained in this manual.

4) Caution for the battery

There is a danger of explosion if the battery is incorrectly replaced. Do not replace the battery. Do not

disassemble, recharge or dispose of in fire.

Used battery should be disposed of according to local regulations.

WARNING

HAZARDOUS VOLTAGE

May cause serious injuries or fatal accidents. Voltage is now applied from the power

supply of machine. There is a danger of electrical shock if you touch the active area

inside the machine.

Be sure to turn the power supply switch OFF and pull the plug out from the power outlet

before starting maintenance work on the machine.

CAUTION

ROTATING PARTS

Be aware of the potential danger of various rollers and take care not to get your fingers or

hand caught into the machine, this can cause serious injuries. Note that the exit roller that

ejects the printed paper is rotating while printing.

Be careful not to get your hair, fingers, hands, sleeve or necktie caught in the machine

while operating the machine.

CAUTION

POWER CORDS & PLUGS

This machine is equipped with a 3-wire power cord fitted with a 3-pronged plug (bi-polar

plug with grounding) for the user’s safety.

Use these power cords in conjunction with a properly grounded electrical outlet to avoid

an electrical shock.

CAUTION

SAFETY INTERLOCK

The scanner unit of this machine have electrical safety interlocks to turn the power of

whenever they are opened.

CHAPTER 1

PARTS NAMES & FUNCTIONS

CHAPTER 1 PARTS NAMES & FUNCTIONS

CONTENTS

1.1 EQUIPMENT OUTLINE ...................................................................................................1-1

1.2 CONTROL PANEL...........................................................................................................1-3

1-1

1.1 EQUIPMENT OUTLINE

Front view

Rear view

10. Paper support

13. Manual feed slot

12. Rear cover

11. Paper tray

3. ADF document support

5. Document tray

4. Document guide base

7. Control panel

9. Output paper support

6. Scanner unit

1. ADF

8. Main cover

2. ADF cover

1-2

No. Part name Outline of functions

1 ADF Automatically feeds the document sheet by sheet to

the reading unit.

2 ADF cover Open this cover when removing jammed documents

from the ADF.

3 ADF document support Supports the documents fitted to the ADF so that they

do not bend.

4 Document guide base Adjusts the document position to the center of ADF.

5 Document tray Stores the read documents.

6 Scanner unit Indicates the whole reading unit including the control

panel. Open this unit when changing the ink cartridge.

7 Control panel Displays the machine operation status and is used to

operate the machine.

8 Main cover Indicates the whole enclosure of the machine.

9 Output paper support Stores the printed sheets of paper.

10 Paper support Supports the paper fitted to the paper tray so that they

do not bend.

11 Paper tray Automatically feeds the paper sheet by sheet to the

printing unit.

12 Rear cover Indicates the rear enclosure. Open this cover when

doing maintenance work.

13 Manual feed slot

Used to feed the paper sheet by sheet manually.

Open the slot cover when removing jammed paper

from the machine.

Autres manuels pour MFC-5200C

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Brother Télécopieur

Brother

Brother FAX 1840C Manuel utilisateur

Brother

Brother FAX-4100 Manuel utilisateur

Brother

Brother Laser MFC-4800 Manuel utilisateur

Brother

Brother 1170 Manuel utilisateur

Brother

Brother FAX-565 Manuel utilisateur

Brother

Brother MFC-9700 Manuel utilisateur

Brother

Brother Fax Manuel utilisateur

Brother

Brother FAX-878 Manuel utilisateur

Brother

Brother MFC 845CW - Color Inkjet - All-in-One Manuel utilisateur

Brother

Brother FAX-8360P Manuel utilisateur

Brother

Brother Fax-2020 Manuel utilisateur

Brother

Brother PT-9200PC Manuel utilisateur

Brother

Brother IntelliFAX 615 Manuel utilisateur

Brother

Brother FAX-775 Manuel utilisateur

Brother

Brother MFC 640CW - Color Inkjet - All-in-One Manuel utilisateur

Brother

Brother FAX 2820 Manuel utilisateur

Brother

Brother FAX 560 Manuel utilisateur

Brother

Brother MFC-9880 Manuel utilisateur

Brother

Brother FAX-2840 Manuel d'utilisation et d'entretien

Brother

Brother MFC-660MC Fiche technique

Brother

Brother FAX-2840 Manuel utilisateur

Brother

Brother FAX-195 Manuel utilisateur

Brother

Brother MFC-7550MC Guide de l'utilisateur

Brother

Brother MFC-820CW Manuel utilisateur

Manuels Télécopieur populaires d'autres marques

Samsung

Samsung SF-515 Manuel utilisateur

Radio Shack

Radio Shack TFX-1031 Manuel utilisateur

imagistics

imagistics 2030 Manuel

Panasonic

Panasonic KX-FL501C Manuel utilisateur

Panasonic

Panasonic KX-FP200L Manuel utilisateur

Furuno

Furuno FAX-30 Manuel utilisateur

Savin

Savin 3740 Manuel

Sharp

Sharp FO-51 Manuel utilisateur

Muratec

Muratec MFX-C3035 Manuel utilisateur

Panasonic

Panasonic KX-PD505DL Manuel utilisateur

Panasonic

Panasonic KX-FC265CX-S Manuel utilisateur

Canon

Canon FAX-L400 Manuel utilisateur

Ricoh

Ricoh 1000L Guide de démarrage rapide

Sharp

Sharp FO-3150 Manuel utilisateur

Kyocera

Kyocera KM-F1060 Manuel utilisateur

Sharp

Sharp FO-2970M Manuel utilisateur

Panasonic

Panasonic KX-F850 Manuel utilisateur

Panasonic

Panasonic KX-FLM652CX Manuel utilisateur