Breville Kinetix Pro BBL800/C Manuel utilisateur

the Kinetix®Pro blender

Instruction Book - BBL800/C & BBL801

BREVILLE

RECOMMENDS

SAFETY FIRST

At Breville we are very safety

conscious. We design and

manufacture consumer

products with the safety of you,

our valued customer, foremost

in mind. In addition we ask

that you exercise a degree of

care when using any electrical

appliance and adhere to the

following precautions.

IMPORTANT

SAFEGUARDS

•Remove and discard all

packaging materials and

stickers before ﬁrst use.

•To avoid choking hazard

for young children,

remove and safely dispose

the protective cover ﬁtted

on the power plug.

•This appliance is for

household use only.

Do not use it in moving

vehicles or boats, do not

use it outdoors, and do not

use it for anything other

than its intended use.

Misuse can cause injury.

•This appliance shall not

be used by children. Keep

the appliance and its cord

out of reach of children

•This appliance can be

used by persons with

reduced physical, sensory

or mental capabilities or

lack of experience and

knowledge if they have

been given supervision

or instruction concerning

2Breville recommends safety ﬁrst

7Components

8Assembly

9Functions

11 Blending Chart

12 Do's & Don't

13 Care & Cleaning

14 Troubleshooting

Contents

use of the appliance in

a safe way and if they

understand the hazards

involved.

•Cleaning and user

maintenance shall not be

made by children without

supervision.

•Children should be

supervised to ensure

they do not play with this

appliance.

•Do not use the appliance

near the edge of a

counter-top or table.

Ensure the surface is level,

clean and free of water

and other substances.

Please be aware that

vibration during use

may cause the appliance

to move.

•Do not use the appliance

on (or close to) a hot

gas or electric burner, or

where it could touch a

heated oven or surface.

•Do not allow the cord to

hang over the edge of a

counter-top, or to become

knotted.

•To avoid electric shock,

do not immerse the cord,

plug or motor base in

water (or other liquids).

•Installation of a residual

current device (a standard

safety switch on your wall

socket) is recommended

to provide additional

safety protection when

using appliances. It is

advisable that a safety

switch (with a rated

residual operating current

not more than 30mA) be

installed in the electrical

circuit supplying the

appliance. Contact your

electrician for further

professional advice.

•In order to avoid the

possible hazard of the

blender starting by

itself due to inadvertent

resetting of the overload

protector on the motor,

do not attach an external

switching device (such

as a timer) or connect the

blender to a circuit that

can regularly switch the

blender on and off.

•Do not operate appliance

with a damaged cord or

plug, or after appliance

malfunctions, or if

dropped or damaged

in any way. Stop use

immediately and contact

Breville by phone or email

for replacement or repair.

•All maintenance (other

than cleaning) is to be

done by an authorised

Breville Customer Service

Centre.

•Authorised Breville

Customer Service Centres

can be found on our

website

www.Breville.com.au.

Alternatively, you can

contact the Breville

Customer Service Centre

by phone on

1300 273 845 or email

AskUs@breville.com.au

IMPORTANT

SAFEGUARDS

FOR YOUR

BLENDER

•Fully unwind the power

cord before use.

•Wash the blender jug with

warm soapy water before

ﬁrst use.

•Use only the blender jug

and lid that is supplied

with this blender. The

use of attachments

or accessories not

manufactured or speciﬁed

by Breville may cause

the risk of ﬁre, electrical

shock, or injury.

•Always ensure the blender

is assembled properly

before using. Lid must be

ﬁrmly secured to the jug

before operation to ensure

internal contents do not

escape, spray or overﬂow.

•If the motor is straining

under a heavy load, do

not operate continuously

for more than 10 seconds.

Allow the motor to rest

for 1 minute between

uses on heavy loads. Note

that none of the recipes

in these instructions are

considered a heavy load.

•Do not leave the blender

unattended when in use.

•Keep hands, ﬁngers, hair

and clothing away from

the blender during use.

Always turn blender off

and unplug at the wall

before reaching inside.

Avoid touching moving

parts.

•Be careful when handling

the blender jug as the

blades are very sharp.

Be careful when emptying

the jug and during

cleaning. Mishandling

of the blades may cause

injury.

•Do not remove the jug

from the motor base while

blender is in use.

•The blender is intended

for food or drinks

preparation. Do not use

for anything other than

food or drinks.

Do not operate without

any ingredients in the

blender jug.

•Never attempt to operate

with damaged blades,

or with utensils, or any

foreign objects inside the

blender jug.

•To reduce the risk of

severe injury to persons

or damage to the blender,

keep hands and utensils

out of the jug while

blending.

•Never blend hot liquids.

Allow ingredients and

liquids to drop to room

temperature before

putting into the jug for

blending.

•Do not put the blender jug

in extremes of heat or cold,

for example placing a cold

jug into hot water, or vice

versa.

•Before moving the blender,

cleaning or putting it away

for storage, always turn

blender off and unplug at

the wall.

•Always disconnect the

appliance from the supply

if it is left unattended

and before assembling,

disassembling or cleaning.

SPECIFICATION

Outside

Dimensions

482mm (H)

160mm (W)

190mm (D)

Net Weight Approx. 4.9kg

These specifications may change

without notice.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

Components

A. Easy One Finger Removal

Breville Assist™ Lid for easy handling.

B. Light Weight Jug

2 litre jug is remarkably strong

and lightweight.

C. Dishwasher Safe

The one-piece blade is ergonomically

designed for ease of cleaning. Both jug and

blade are dishwasher safe.

D. Premium Materials

Stainless steel and die-cast construction for

durability.

E. Intelligent engineering

Powerful 2000 watt motor and highly

efﬁcient blades results in quiet operation.

Blade removal

The one piece blade

removal system is

ergonomically designed for

ease of cleaning.

Surgical Grade

Stainless Steel Blades

To ensure the blades stay

sharp longer they are

made from surgical grade

stainless steel. The central

blades are serrated for

extra cutting performance.

Assembly

BEFORE FIRST USE

Before using your Breville product for the ﬁrst

time, remove any packaging material and

promotional labels. Ensure the appliance is

switched off at the power outlet and the power

cord is unplugged.

Wash the lid, inner lid, blender jug and blade

assembly (refer to Disassembling the blender)

of the Breville product in warm, soapy water

with a soft cloth. Rinse and dry thoroughly.

The motor base can be wiped with a damp

cloth. Dry thoroughly.

The lid, inner lid, blade assembly and silicon

seal may be washed in the dishwasher in the

top shelf only on a standard wash.

The blender jug may be placed in the bottom

shelf.

NOTE

Ensure that the silicon seal is carefully placed

completely around the blade assembly, prior

to inserting into the jug, as this will prevent

leakages.

1. To assemble the blender jug, place the

silicon seal onto the blade assembly.

2. Turn the blender jug upside down and

insert the blade assembly into the jug base.

3. Turn the blade removal system

anticlockwise until ﬁrmly screwed into

position.

4. Place the motor base on a ﬂat, dry surface

such as a bench top. Ensure that the motor

base is switched off at the power outlet

and the power cord is unplugged. Turn the

blender jug upright and insert onto the

motor base. The handle of the blender jug

can be positioned to the left or right hand

side of the appliance.

5. Plug the power cord into a 230/240v power

outlet and switch on.

Functions

1. To turn the blender on press the POWER

button on the far left of the control panel.

The POWER button will illuminate and

ﬂash indicating the blender is powered on.

When the jug is placed on the base all lights

will illuminate signalling the blender is

ready for use.

2. Add food or liquid into the blender jug

ensuring not to exceed the MAX mark.

3. Place the blender lid ﬁrmly into position

on the top of the blender jug. If not already

in place, insert the clear inner lid into

the blender lid and turn clockwise or

anticlockwise to lock into position.

4. The blender features a Breville Assist Lid™

for easy handling. This allows the lid to

ﬁt tightly onto the blender jug, avoiding

displacement during operation. The ring

pull design allows the user to easily remove

the lid with a simple leverage action.

5. Select the required function (BLEND,

SMOOTHIE or ICE/AUTO PULSE) by

pressing the corresponding function button.

The blender will start to operate and only

the selected function button will illuminate.

The POWER button will continue to ﬂash.

The speed can be changed at any time

during the blending process. Each time

a new function is selected its button will

illuminate and the previous function button

illumination will go out.

6. For ice-crushing or ingredients that require

short bursts of power, select the ICE/AUTO

PULSE button. The blender will start to

operate and the ICE/AUTO PULSE button

will illuminate. The POWER button will

continue to ﬂash. The pre-programmed

functions have been designed to run for a

speciﬁc time. To operate these functions

simply press desired function button

once only and release — automatically

preprogrammed function will begin.

7. To stop blending at any time, press the

selected speed button. The POWER button

can also be pressed.

8. At the end of use, always ensure the blender

is turned off by pressing the POWER button

on the control panel. Then switch the

appliance off at the power outlet and unplug

the cord. Ensure the motor and blades have

completely stopped before attempting to

move the appliance, or when the blender

is not in use and before disassembling,

cleaning and storing.

FUNCTION PROGRAMMED TIME

Blend 120 seconds(2 minutes)

Smoothie 60 seconds(1 minute)

Ice/Auto Pulse 60 seconds(1 minute)

NOTE

• When using your for the ﬁrst time, you may

notice an odour coming from the motor.

This is normal and will dissipate with use.

• When the blender jug is ﬁlled at or near the

MAX line, place one hand on the blender

lid to avoid displacement of the lid during

operation. Do not blend hot ingredients,

allow to cool before placing into the blender

jug.

• Operate the blender only for the appropriate

amount of time required. The blender will

automatically stop blending on the Blend

function after 120 seconds (2 minutes) and

after 60 seconds (1 minute) on the smoothie

and ice/Auto Pulse functions to avoid over

processing.

• The Smoothie function has a unique

processing technique that blends the

denser ingredients at a lower function,

then increases as ingredients thicken.

This may happen several times while

blending smoothies.

• During the blending process, ingredients

may stick to the sides of the blender jug.

To push the food back onto the blades, press

the POWER button on the control panel and

switch off at the power outlet and remove

the power cord. Remove the lid and use a

plastic spatula to scrape down the sides of

the jug. Replace the lid before recommencing

blending.

• If the blades become stuck, the blender

will automatically turn off. To reset turn the

blender off at the power outlet, clean jug with

spatula and then turn back on, blender will

reset.

• If any moisture or liquid appears on top of

the motor base during blending, press the

POWER button on the control panel, switch

off at the power outlet and remove the power

plug. Remove the blender jug. Wipe the motor

base immediately with a dry cloth or paper

towelling to absorb the liquid. Check the

blender jug is correctly assembled.

DISASSEMBLING

1. Always ensure the blender is switched off

by pressing the POWER button on the

control panel. Then switch off at the power

outlet and unplug the power cord.

2. Remove the blender jug from the motor

base by grasping the handle and lifting the

jug in an upward direction.

3. Remove the blade assembly by upturning

the blender jug and turning the blade

removal system clockwise then lift upwards

and away from the base of the blender.

4. Remove the silicon seal from the blade

assembly.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Breville Mixer

Breville

Breville the Q BBL820SHY1BCA1 Manuel utilisateur

Breville

Breville the Super Q BBL920 Manuel utilisateur

Breville

Breville BLEND-ACTIVE PRO VBL212X Manuel utilisateur

Breville

Breville the Vac Q BBL002 Manuel utilisateur

Breville

Breville VHB067 Manuel utilisateur

Breville

Breville BBL800 Manuel utilisateur

Breville

Breville VHB109 Manuel utilisateur

Breville

Breville the Super Q BBL920 Manuel utilisateur

Breville

Breville Power Blender BLR50 Manuel utilisateur

Breville

Breville Wizz Stainless HB95 Manuel utilisateur

Breville

Breville pick and mix VHB112 Manuel utilisateur

Breville

Breville BCS500XL Manuel utilisateur

Breville

Breville Wizz Electronic BBL500 Manuel utilisateur

Breville

Breville pick and mix VBL071 Manuel utilisateur

Breville

Breville the 3X Bluicer Pro Manuel utilisateur

Breville

Breville VBL074 Manuel utilisateur

Breville

Breville CBL6 Manuel utilisateur

Breville

Breville ikon Kinetix BBL550 Manuel utilisateur

Breville

Breville Wizz Stick BSB300 Manuel utilisateur

Breville

Breville Blend Active Manuel utilisateur

Breville

Breville BBL910XL Manuel utilisateur

Breville

Breville the Control Grip BSB400XL Manuel utilisateur

Breville

Breville Hemisphere BBL605XL Manuel utilisateur

Breville

Breville VBL060 Manuel utilisateur

Manuels Mixer populaires d'autres marques

ROTOR

ROTOR 1125.201 Manuel utilisateur

Braun

Braun Multiquick 5 Vario series Manuel utilisateur

ARENDO

ARENDO MIRA 305424 Manuel utilisateur

CHEF-BUILT

CHEF-BUILT CCB-3500 Manuel utilisateur

Viconte

Viconte VC-4406 Manuel utilisateur

Oster

Oster BLSTAB-CB0 Manuel utilisateur

HOFFEN

HOFFEN MC-3005 Manuel utilisateur

Black & Decker

Black & Decker BLC18750DM Manuel utilisateur

Sunbeam

Sunbeam 4182 Manuel utilisateur

Bialetti

Bialetti FMX35 Manuel utilisateur

Black & Decker

Black & Decker BL8000 Manuel utilisateur

Duronic

Duronic BL530 Manuel utilisateur

Exquisit

Exquisit MS 3002 wes Manuel utilisateur

Lumme

Lumme LU-KP1891A Manuel utilisateur

Binatone

Binatone HB-735 Manuel utilisateur

Moulinex

Moulinex LM936E10 Manuel utilisateur

Oster

Oster VERSA Manuel d'installation et d'exploitation

Ninja

Ninja NN210Q Manuel utilisateur