Breas Medical PowerShell Manuel utilisateur

PowerShell®with

Extended Life Battery

Getting Started Guide

Battery Warnings and Cautions

The PowerShell comes with a removable Lithium Ion Battery. Care-

ful attention must be paid to the warnings and cautions described

below relating to the Battery. Misusing the Battery may cause the

Battery to get hot, rupture, ignite and cause serious injury.

WARNINGS:

•Do not place the Battery in ﬁre or heat the Battery.

• Do not install the Battery backwards so that the polarity is

reversed.

• Do not connect the positive terminal and the negative

terminal of the Battery to each other with any metal object

(such as wire).

• Do not carry or store the Battery together with necklaces,

hairpins, or other metal objects.

• Do not pierce the Battery with nails, strike the Battery with

a hammer, step on the Battery or otherwise subject it to

strong impacts or shocks.

• Do not solder onto the Battery.

• Do not expose the Battery to water or salt water, or allow

the Battery to get wet.

• Do not disassemble or modify the Battery. The Battery

contains safety and protection devices which, if damaged,

may cause the Battery to generate heat, rupture or ignite.

• Do not place the Battery on or near ﬁres, stoves or other

high-temperature locations. Do not place the Battery in

direct sunlight, or use or store the Battery inside cars in

hot weather. Doing so may cause the Battery to generate

heat, rupture or ignite. Using the Battery in this manner

may also result in a loss of performance and a shortened life

expectancy.

• Immediately discontinue use of the Battery if, while using,

charging or storing the Battery, the Battery emits an

unusual smell, feels hot, changes color, changes shape or

appears abnormal in any other way. Contact the Breas

Medical Service Center at 1-855-436-8724 if any of these

problems are observed.

• Do not place the Battery in microwave ovens, high-

pressure containers, or on induction cookware.

• In the event that the Battery leaks and the ﬂuid gets

into one’s eye, do not rub the eye. Rinse well with water

and immediately seek medical care. If left untreated the

battery ﬂuid could cause damage to the eye.

• Only charge the Battery with the supplied Breas Medical

PowerShell and the supplied Breas Medical Power

Supply. Do not use any other removeable battery

charger, AC adapter, or other device to charge the

Battery.

• Do not attach the Battery directly to a vehicle cigarette

lighter or to the Power Supply plug.

• Do not continue charging the Battery if it does not

recharge within the speciﬁed charging time. Doing so

may cause the Battery to become hot, rupture or ignite.

• Remove the Battery from the PowerShell if the Z2 is not

likely to be used for some time. Do not use the Battery

to power any device other than the Z2.

• Only use or charge the Battery within the operating

temperature, humidity and altitude conditions speciﬁed

in the Technical Speciﬁcations section of this User

Guide.

• Only store or transport the Battery within the storage

and transport temperature and humidity conditions

speciﬁed in the Technical Speciﬁcations section of this

User Guide.

CAUTION:

• When the Battery is worn out, insulate the terminals

with adhesive tape or similar materials before disposal.

Welcome!

The PowerShell is an integrated battery carrier that uniﬁes

everything you need for a great night of sleep without cords. Please

read the entire Z2™User Guide for complete instructions on using

the Z2 CPAP. The PowerShell is also fully compatible with the Z1®

CPAP system.

PowerShell with

Neoprene Sleeve

Extended Life

Battery with Shuttle

Package Contents:

WARNING: The Z2 must only be used with the

optional Breas Medical PowerShell with Breas Medical

Battery (or the Breas Medical Power Supply). DO NOT use

any other power source with the Z2.

PowerShell Getting Started Guide

1. Slide the battery into the lower

bay of the PowerShell until you hear

the shuttle click indicating the bat-

tery has locked into place.

NOTE: The Battery can

be removed from the

PowerShell by pressing the

two blue buttons on the

Battery Shuttle and sliding

the Battery out.

2. Slide the Z2 all the way into the

upper bay of the PowerShell. You

will hear the Z2 click indicating that

it has locked into place. The Z2 will

power on in standby mode. The

display will read .

CAUTION: Insert the

Z2 carefully ensuring the

power barrel connector

slides into the power input

on the Z2.

Instructions for Use

NOTE: The Z2 can be removed from the PowerShell

by pressing the two [ ] symbols on the sides of the

PowerShell and sliding the Z2 out.

NOTE: Remove the Battery from the PowerShell when

the Z2 is not in use, unless the Power Supply is plugged

into the PowerShell to charge the Battery. Otherwise

the Z2 and PowerShell will drain the battery completely

within 2-3 days.

3. Connect one end of the CPAP

tube to the round end of the tube

adapter. Insert the other end of the

tube adapter into the outlet of the

Z2 as shown.

Connect the other end of the CPAP

tube to the mask. Ensure all con-

nections

are tight to avoid air leaks.

If you are using a Qtube and HME,

the order of pieces are as follows:

PowerShell, tube adapter, 8”tube,

Qtube, 4’ tube, HME, mask.

4. Push the start/stop button ( )

to initiate therapy. Push this button

a second time to stop therapy.

Alternatively, the Z2 Auto fea-

tures an Auto On/O which starts

therapy when you place the mask

on your face and start to breathe

and stops therapy when the mask

is removed.

NOTE: It is recommended

that you fully charge the

battery prior to each use.

Instructions on how to

charge the battery follow

in this guide.

Charging the Battery

1. With both the Z2 and the Bat-

tery fully inserted into the Power-

Shell, plug the Power Supply into

the PowerShell as shown and into

a power outlet.

2. Ensure the Z2 is in standby mode

(display reads 0.0). The Battery

will not charge unless the Z2 is in

standby mode. The Battery status

indicator on the Z2 will ﬂash when

the Battery is charging. The number

of solid bars indicates the current

level of charge. The battery status

indicator will stop ﬂashing when the

Battery is fully charged.

WARNING: Only charge the Battery with the supplied

Breas Medical PowerShell and the supplied Breas Medical

Power Supply. Do not use any other battery charger, AC

adapter, or other device to charge the Battery.

CAUTION: Make sure your Battery is fully charged

before commencing CPAP therapy using the PowerShell.

The battery life of a fully charged Extended Life Battery in

the PowerShell is typically 8.9 hours or longer, after which

treatment will terminate.

Trouble Shooting Tips

Battery is not charging

1. Disconnect the Z2 from the Battery and the power

supply.

2. If you squeeze the arrows on the sides of the

PowerShell, you should feel the Z2 release.

3. Reassemble the Z2 and the battery to the PowerShell

and to the power supply. When reassembling, make

sure you hear the components click together and

see that the DC plug (silver cylinder in the bottom of

PowerShell) goes into the hole in the Z2.

4. Make sure to fully charge the Battery for 12 hours

after use.

5. The battery icon on the Z2 screen will stop ﬂashing

and all bars will be solid.

NOTE: Battery icon starts showing 4 bars at 90% charge.

Wait for battery icon on Z2 LCD screen to stop ﬂashing.

Number of Solid Bars Charge Remaining

1 10-35%

2 35-63%

3 63-90%

4 90-100%

Typically it will take 12 hours to fully charge the battery. After a few

minutes, the back light of the display will turn oﬀ. This is to con-

serve power. It does not indicate that the battery is fully charged.

NOTE: The PowerShell will not charge the battery at the

same time as you are using your Z2 for treatment.

Battery Losing Its Charge Between Trips

If you are not traveling on a regular basis, your battery may dis-

charge completely between trips. It is recommended that every

few weeks you fully charge your battery to maintain a charge on

it. When it is fully charged, remove from PowerShell and store it

separately so it does not drain the battery charge.

To Release Z2 from PowerShell

Press and hold the 2 blue arrow

buttons at the bottom of the grey

sleeve of the PowerShell while

simultaneously pulling up on the

Z2.

To Release Overnight Battery

from PowerShell

Press and hold the 2 blue buttons

on the white cap of the battery, and with even pressure, pull up at

the same time.

Using the DC Mobile Adapter

Your PowerShell Battery can be charged with the DC Mobile Adapt-

er using most automobile charging systems. The amount of time

will vary, depending on the voltage delivered by the car battery.

Some cars chargers only work while the car is running. Ideally the

Mobile Adapter would be used while the car was being driven

during the day, so the battery will be charged for the night.

We cannot guarantee the mobile adapter will function with all cars.

NOTE: Your DC Mobile Adapter cannot be used to run your Z2.

Minimum Voltage Needed to Charge your Z2

12 volts.

Battery Life

The battery life varies depending on the altitude and pressure set-

ting of the unit. Higher altitudes and higher pressures will use more

battery life.

Temperature can also be a factor. Colder weather will use more

battery life. The battery is designed to be used in temperatures

between 41˚ F and 95˚ F.

Do not charge the battery in temperatures above 80˚F.

Table des matières

Manuels Étui de transport populaires d'autres marques

Fujitsu

Fujitsu PenCentra 130 Manuel utilisateur

H2O Audio

H2O Audio SV-iP4G Manuel utilisateur

Catalyst

Catalyst Total Protection Manuel utilisateur

BASETech

BASETech 65 88 00 Manuel utilisateur

Sibel

Sibel Pilotrol Manuel utilisateur

Pivot

Pivot A20A Manuel utilisateur

Dicota

Dicota N6198KHY Manuel utilisateur

NEC

NEC MultiSync SC-EX23 Manuel utilisateur

Dicota

Dicota N16358NHY Manuel utilisateur

Dicota

Dicota N16258PHY Manuel utilisateur

Listen Technologies

Listen Technologies DCN LA-336 Manuel utilisateur

GreenWorks

GreenWorks AWP100 Manuel utilisateur

Listen Technologies

Listen Technologies CCS 800 Manuel utilisateur

Manfrotto

Manfrotto MBAG100P Manuel utilisateur

Califone

Califone 2006 Manuel utilisateur

Dicota

Dicota DataCart Manuel utilisateur

human care

human care neXus Manuel utilisateur

Wolfcraft

Wolfcraft 5528 Guide rapide