B+B SmartWorx UR5i v2 Libratum Mode d’emploi

Start Guide

for v2 Routers

Start Guide

Safety Instructions

Please take care to following instructions:

•Use the router in compliance with national and international law and in compliance with

any special or additional restrictions regulating use of the router in the various applica-

tions and environments.

•To avoid possible injury and/or damage to the device, observe the relevant provisions

and standards. Use only the original accessories as recommended. Unauthorized de-

vice or accessory modiﬁcation, or using accessories that have not been approved can

result in router damage and/or violation of the regulations.

•Unauthorized device or accessory modiﬁcation or using the accessories that have not

been approved can result in warranty termination.

•Do not open the router.

•Caution! The SIM card can be swallowed by small children.

•When connecting the device to a power supply do not exceed the deﬁned voltage.

•Do not expose the router to extreme ambient conditions. Protect the router against dust,

moisture, and high temperature.

•It is recommended that you do not use the router at petrol ﬁlling stations. We recommend

observing local restrictions concerning the use of radio-based devices while working with

explosive material for example, at petrol ﬁlling stations, or in chemical plants.

•While using the router close to personal medical devices, such as cardiac pacemakers

or hearing aids, proceed with heightened caution.

•Operating the router too close to TV sets, radio receivers, personal computers, or tele-

phones can cause interference.

•It is recommended that you create a copy or backup of the important settings stored in

the memory of the router.

QSG-0001-EN, June 1, 2017 1Released in the Czech Republic

Start Guide

Product Disposal Instructions

The WEEE (Waste Electrical and Electronic Equipment: 2012/19/EU) direc-

tive has been introduced to ensure that electrical/electronic products are recy-

cled using the best available recovery techniques to minimize the impact on

the environment. This product contains high quality materials and components

which can be recycled. At the end of its life this product MUST NOT be mixed

with other commercial waste for disposal. Check with the terms and conditions

of your supplier for disposal information.

Open Source Software License

The software in this device uses various pieces of open source software governed by

following licenses:

•GPL versions 2 and 3

•LGPL version 2

•BSD-style licences

•MIT-style licences

The list of components together with complete license texts can be found on the device

itself. See Licenses link at the bottom of the router’s main Web page (General Status) or point

your browser to this address (replace the DEVICE_IP string with real router’s IP address):

http://DEVICE_IP/licenses.cgi

This is a written offer valid for 3 years since the device purchase offering any third party for

a charge no more than cost of physically performing source distribution, a complete machine-

readable copy of the corresponding source code on a ﬂash drive medium. If you are interested

in obtaining the source, please contact us at:

cellularsales@advantech-bb.com

Modiﬁcations and debugging of LGPL-linked executables:

The manufacturer of the device hereby grants the right to use debugging techniques (e.g.

decompilation) and making customer modiﬁcations of any executable linked with a LGPL li-

brary for own purposes. Note these rights are limited to the customer’s own usage. No further

distribution of such modiﬁed executables and no transmission of the information obtained dur-

ing these actions may be done.

QSG-0001-EN, June 1, 2017 2Released in the Czech Republic

Start Guide

First Use

Before applying power to the router, connect the components that you required for your

applications. You cannot operate the router without connected antenna, inserted SIM card,

nor connected power supply.

If you do not have connected main antenna during operation of the router, the router can

be damaged!

XR5i v2 routers are not equipped with a cellular module which means that SIM card

readers and antenna connectors are not available on the router.

1. Antenna

Use a SMA connector to connect the antennas to the router. The main antenna is con-

nected to the router by screwing on the ANT connector (see Figure below). The second diver-

sity antenna can also be connected to the DIV connector to improve performance.

QSG-0001-EN, June 1, 2017 3Released in the Czech Republic

Start Guide

2. SIM Card

The SIM card reader, for 3 V and 1.8 V SIM cards, is located on the front panel of the

router. Full version of the router contains two readers. If you intend to use this device to com-

municate over a cellular network, please place an activated data-provisioned SIM card with an

unblocked PIN into the SIM card reader. Insert your SIM card into the SIM1 or SIM2 holder

and push it to the reader (see Figure below).

Before handling of the SIM card disconnect the router from power supply!

3. Power

The router requires an external DC power supply. The DC voltage required is between

+10 to +30 V DC. The router has built-in protection against reverse polarity without signaling.

Connect the power supply cable to the PWR connector on the front panel of the router (see

Figure below) and tighten locking screws.

QSG-0001-EN, June 1, 2017 4Released in the Czech Republic

Start Guide

4. Ethernet

An Ethernet cable may be connected to the ETH connector on the front panel (see Figure

above). By default, this Ethernet port is conﬁgured as follows:

Connector Purpose Default Setting

ETH LAN port (default)

Connect your laptop or PC to this port to

get a local web-server for device conﬁgu-

ration and diagnostics.

DHCP Server

IP Address: 192.168.1.1

NetMask: 255.255.255.0

If the router is equipped with any expansion port, connect the appropriate cable to the port

PORT1 or PORT2. The pin assignments for expansion ports is described in manual for corre-

sponding expansion port.

Conﬁguration

1. Conﬁguring the Device Using the Web Browser

You can access the router for status monitoring, conﬁguration, and administration after en-

tering the IP address of the router into the web interface. The default IP address is 192.168.1.1

(netmask 255.255.255.0). Conﬁguration access is allowed for the user "root" with the initial

password "root". For a detailed description and examples of the router conﬁgurations, see the

Conﬁguration Manual.

2. Conﬁguring the Device Using the Telnet

You can access the router for status monitoring, conﬁguration, and administration using

the Telnet interface (for example Putty client). The default IP address is 192.168.1.1 (netmask

255.255.255.0). Conﬁguration access is allowed for the user "root" with the initial password

"root". For a detailed description and examples of the router conﬁgurations, see the Conﬁgu-

ration Manual.

QSG-0001-EN, June 1, 2017 5Released in the Czech Republic

Start Guide

3. Conﬁguration Settings via SmartWorx Hub

If your router has been pre-installed with the SmartWorx Hub client, you may conﬁgure it

from SmartWorx Hub. Navigate your browser to:

https://hub.bb-smartworx.com

If this is your ﬁrst time, please register with the site. If not, please login with your username

and password. Once logged in, further assistance can be found here:

https://hub.bb-smartworx.com/Login/Help?HelpFile=bbdms_help.pdf

4. Restoring and Backing up the Router Conﬁguration

After you reset the router, the current conﬁguration is overwritten by the default settings.

We recommend that you back up the router conﬁguration before resetting the device. Refer to

the Conﬁguration Manual for more information.

When the PWR LED starts blinking, it is possible to restore the default conﬁguration of the

router by pressing the RST button on the front panel. After pressing this button, the default

conﬁguration is restored and then the router reboots (green LED will be on).

After logging on to the device for the ﬁrst time, we strongly recommend to change

the default password due to security reasons. Simultaneously, you will gain ac-

cess to all functions of the router.

Documentation

User’s Manual, Conﬁguration Manual and manual for each expansion port can be found

and downloaded on this web site: www.advantech-bb.cz/download

Hereby, Advantech B+B SmartWorx s.r.o. declares that the radio equipment type

ER75i v2,LR77 v2,LR77 v2 Libratum,RR75i v2,UR5i v2,UR5i v2 Libratum,

XR5i v2 (versions with radio interface only) and XR5i v2E (versions with radio inter-

face only) is in compliance with Directive 2014/53/EU.

XR5i v2 and XR5i v2E versions without radio interface are in compliance with the essential

requirements and other relevant provisions of Directives 2014/30/EU and 2014/35/EU.

The full text of the EU Declaration of Conformity is available at the following internet address:

www.advantech-bb.cz/eudoc

QSG-0001-EN, June 1, 2017 6Released in the Czech Republic

Autres manuels pour UR5i v2 Libratum

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels B+B SmartWorx Routeur réseau

B+B SmartWorx

B+B SmartWorx ICR-1601 Mode d’emploi

B+B SmartWorx

B+B SmartWorx UR5i v2 Libratum Manuel utilisateur

B+B SmartWorx

B+B SmartWorx SmartFlex SR300 Manuel utilisateur

B+B SmartWorx

B+B SmartWorx CR10 v2 Mode d’emploi

B+B SmartWorx

B+B SmartWorx CR10 v2 Manuel utilisateur

B+B SmartWorx

B+B SmartWorx V3 Feuille d'instructions

B+B SmartWorx

B+B SmartWorx RR75i v2 Manuel utilisateur

B+B SmartWorx

B+B SmartWorx SmartFlex Feuille d'instructions

B+B SmartWorx

B+B SmartWorx SPECTRE v3 LTE Manuel utilisateur

B+B SmartWorx

B+B SmartWorx SmartFlex SR300 Manuel utilisateur

B+B SmartWorx

B+B SmartWorx ABDN-ER-IN501 Series Manuel utilisateur

B+B SmartWorx

B+B SmartWorx spectre lte Manuel utilisateur

B+B SmartWorx

B+B SmartWorx SmartStart SL301 Manuel utilisateur

B+B SmartWorx

B+B SmartWorx UCR11 v2 Manuel utilisateur

B+B SmartWorx

B+B SmartWorx SE400 Series Manuel utilisateur

B+B SmartWorx

B+B SmartWorx ESWP205-1SFP-T Manuel utilisateur

B+B SmartWorx

B+B SmartWorx LR77 v2 Libratum Manuel utilisateur

B+B SmartWorx

B+B SmartWorx ICR-1601 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité