Boyo Vision VTCRH1 Manuel utilisateur
VTCRH4
VTCRH1
6. Accessories
DCS.5
power
cable*2PCS
(3PCS for
VTCRH2
and
SPCS for VTCRH4)
2.4G antenna extension
cord"1PC
Warranty
card
*1
PC
Fan-shaped bracket
*1
PC
•
2.4G
wireless cameras
•1
PC
(2PCS for VTCRH2,
4PCS
for
VTCRH4)
Product registration
card*1PC
Car
charger
power
cable"
1PC
Power
adapter*1
PC
2.4G
5D8 antenna
*2PCS
(3PCS for VT
CRH
2,
SPCS
forVTCRH4)
Suction bracket*1 PC
Fortechnical support contact 888-941-3060
or
email [email protected]
WWW.VISIONTECHAMERICA.COM
BOYO®
VISION
User
Manual
VTCRH2
~
Before operating the Monitor, please read this manual thoroughly
and retain it for future reference.
The cameras are battery-operated and have a built-in rechargeable
battery. Once fully charged, it will operate continuously for 20 hours.
The battery can be charged using
If you are planning to operate the hitch cameras for multiple days, please
consider the following to conserve battery.
Attention
For
your
safety,
Do
not
watch
video
or
set
monitors
while
driving.
Non-professional please
do
not
disassemble1tle product
at
will,
pleaseconsult
the
afler-salasserviceorganization
when
ltle
productmalfunctions,
or
send itto
ltle
local maintenance
departmentfor inspection
and
repair.
Warning
When
installing
ltlis
product, please install
it
in
the
pDBition permitted
by
laws
and
regulations,
and
we
shall
not
be
raspcnsible
for
the
liabilitycaused by
the
illegal installationof
the
product.
Tlpa
In coldweather,
the
product
may
appear
dark
screen phenomenon
when
startup.
Which
wlll
heat
up
slowly
and
return
to normal
with
the
increase
of
temperature.
Notice
to
the
VTCRH
hitch
camera uaera
-0
---
·
lnsulled
DC
powercable
1.
turn
off
the
power
to
the
camera
when
not
using.
2. install a
DC
power
cable near
the
camera
to
ACC
power
andconnect
it
to
the
camera.
It
will
charge
the
battery
while
the
vehicle
key
is
on.
1.
Product
Function
&Pararnatar
Wimlm
MonilQI'
Power
Button
LCD: 5 inch
IPS
panel,
16:9
highdefinition
Resolution:
1024*RGB*BOO
Full
viewing
angle:
Left(85°) Rlght(85°)
Below(85")
Above(85°)
Panel
key
function: 5PCS
key
control
Wireless
video
input: 1,2,
or
4 channelwireless video input
Using digitalwlrelass encryptiontechnologyto
coda
connection,
with strong
anti-interference
ability
2.4Gwireless transmission
distance:
700ft.
in
open
area
Power
supply: DC12-24V
Power
consumption:
3W
Working
temperature:
-4"F
-158°F
Storage
temperature: -22°F-185°F
Size:
5.6"
x 4.1" x
2.5"
(excluding bracket)
Wlml111Camara
Effectiven,sclLJtion: 1280•720px, 720P,
ImageSensor: 1/2.7"
CMOS
Horizontalviewingangle:
130
degree
Wirelesstransmission distance: 700ft.
in
open
area
System: PALJNTSC automatically
2
SPSP: FHSS{adaptive frequency hopping)
Transmission bandwidth: 8MHz BER<1 E-3
Built-in battery capacity: 6400mA
Battery indicator: 4 LED lights
Battery charging time: DC5.5, 5~24V, 10 hours
Working time: 18 hours(when fully charged)
Camera adjustable angle: 0-100 degree
Operation frequency: 2400-2483.5MHZ
ON/OFF mode: press and hold to turn on and turn off, short press to
display battery capacity
Installation mode: magnet base adsorption installation
Night vision: HD infrared night vision
SNR: 46.5dB
Waterproof level: IP68
Transmitting sensitivity: -89 dBm
Material: black aluminum alloy
Shockproof: 4G
Power supply: DC 5-24V
Working temperature: -4°F -158°F
Storage temperature: -22°F -185°F
Size: 2.9" x 1.8" x 2.2" (excluding bracket)
2. Product Features
Heavy Duty Wireless Waterproof Camera with IR night vision,
builtbattery and magnetic mounting. . .
Camera with 3MP pixels image with 720P HD video streaming.
2.4G wireless transmission with no delay or deadlock.
Transmission distance up to 700ft.
in
open area.
A monitorwith original IPS display with full viewing angle.
1024*800 resolution with 16:9 wide screen.
Automatically shut offscreen when there is no video signal and
starts up within a second when signal is detected.
• Camera operates for 18 hours with full charge.
3
3.
Product Introduction
Monitor Introduction
1.
2.4G transmission antenna
2.
LCD screen
3.
"M": enter/exit the menu
4.
Flip: horizontally/vertically image flip
5.
Power: turn on/offthe monitor
6.
Parking guide lines: on/off
7.
Paring: long press to pair
VTCRH2 and VTCRH4 only:
-press shortly to switch display
Wireless Camera Introduction
1.
2.4G antenna
2. Night vision infrared light
3.
Angle adjusting knob
4.
Light sensor(night vision)
5.
Power indicator
6.
Power on/off
7.
Built-in battery
8.
Charging port
4. Menu Setup Introduction
M Button
8
3 4 5 6 7
3
i
7
Press the "M" key to open the option for contrast, saturation and
brightness, and then press "
..i11.._,,
or
..
,.."'-" key on the fro~t
pan_el
to set
the contrast, saturation and brightness. Just as shown
In
the images
below. And which will be saved and disappeared automatically after
5 seconds.
4
5
6
Flip Button
Under single image display, press "
..i1
1
11..
"key on the front panel to turn
up/down/left/right the display image. Under multiple image display,
tum up/down/left/right the screen and menu (only for VTCRH2 and
VTCRH4).
Parking Guideline Button
Press
",..-,.:"key
on the front panel to open and close the parking guide
line. Just as shown
in
the image below.
Image display mode switch
Press'ao'to switch image display mode.(only for VTCRH2 and VTCRH4)
Camera pairing
Under single image display mode, press and hold
"CJD"key
on the front
panel to pair the cameras. Just as shown
in
the image below. Then
remove the powerfor the wireless camera and then powered it on
again. If pair successfully, it will show the camera image, if
no,
then
the screen will display "Pairfail), and you will need to repair it again.
The whole pair process will need about 1
OS
. For multiple wireless
cameras, you will need to enter into the related channel display, and
then pair the cameras one by one(only for VTCRH2 and VTCRH4).
5
5.
Connections
Wireless camera
Charged by cigarette car charger
Wireless monitor
u
~l
..
~•XJ~•--
~ -
_11c
-_
-;
:JJ==:?
~
_
,
__
__
--
---
~ '
Powered by DC power cable
1.
DC12-24V(By cigarette car charger or DC cable)
2. Brown line: trigger full screen to CAM 1
3.
Green line: trigger full screen to CAM 2(to CAM 1 for VTCRH1)
4.
Blue line: trigger full screen to CAM3
5.
Grey line: trigger full screen to CAM4
6
Ce manuel convient aux modèles suivants
2
Autres manuels Boyo Vision Appareil photo numérique
