Bouncepad Wing Manuel utilisateur

Sheet Code: BP-IM-071_REV1

Release Date: 24/05/2021

Condential, no part of this publication

may be reproduced or transmitted in any

form without the written permission of the

Wing - Slim

Assembly Instructions

In the Box Fixings

List

Tools Required:

All tools provided

Mounting Arm

Access Panel

Mounting

Bracket

Bouncepad

Lock

Mounting Arm

Case Back

Faceplate

8x M4x8mm

Buttonhead

screw

10x M6x10mm

Buttonhead

screw

*xings to attach the stand to the

ground are not provided.

Position the Mount Bracket on the

ground where the stand is to be

located.

If using a hard-wired power supply,

feed the cable into the Mounting

Arm.

56Locate the Mounting Arm onto the

Mount Bracket as shown.

Minimum:

380mm 15”

2Mark your mounting surface, then

drill (as appropriate to your chosen

xing method).

*xings to attach the

product to the ground

are not provided.

Secure the Mount Bracket to your

mounting surface, with your chosen

xing method.

Remove the Access Panel from the

Mounting Arm. Store all parts safely

aside for use later.

*shown for illustrative purposes.

*Fitted into Case by Bouncepad.

**Lock available as optional extra

(at additional charge).

14 15

Locate and secure the

Access Panel to the

Mounting Arm.

For added security, install

a Kensington security

cable.

8 9

11 12

Remove the Faceplate from the Case

Back. Store this aside.

Locate and secure the Case Back to

the Mounting Arm, with 4x M6x10mm

screws. Ensure good Case alignment.

Install the tablet and the tablet

power cable. Connect the tablet to a power source.

Installation is

complete.

*The Case is congured to your order.

If requiring a dierent tablet

conguration, please contact us.

7Secure the Mounting Arm to the

Mount Bracket, with 5x M6x10mm

screws.

Complete the separate tablet setup

document - specic to your tablet,

device orientation & locking method.

*Kensington security

cable not provided.

13 Secure the Faceplate shut with your

chosen locking method.

*If requiring an upgrade to a

keyed Case, please contact us.

Sheet Code: BP-IM-074_REV0

Release Date: 15/06/2021

Condential, no part of this publication

may be reproduced or transmitted in any

form without the written permission of the

Wing - Tablet Setup

Assembly Instructions

Tools Required:

All tools provided

Follow the tablet specic assembly guide

shown for locating your tablet setup kit.

Take care to ensure correct thread

engagement between the xings & tablet

supports.

*Your congured product may not be representative of the shown illustration.

**The Bouncepad lock is an optional extra (at additional charge).

M4x8mm

Buttonhead

screw

Tablet support

Follow the shown

guide if installing your

device in Landscape.

Follow the shown

guide if installing your

device in Portrait.

Device:

iPad Pro 12.9” (Gen3,4,5)

Follow the shown

guide if installing your

device in Landscape.

Follow the shown

guide if installing your

device in Portrait.

TDL16

TDL17

TDL16

TDL17

TDL16

TDL17

Ce manuel convient aux modèles suivants

Autres manuels bouncepad Support et étagère

bouncepad

bouncepad Floorstanding with Brother Printer Mount Manuel utilisateur

bouncepad

bouncepad VESA Manuel utilisateur

bouncepad

bouncepad Wallmount Manuel utilisateur

bouncepad

bouncepad Wing Manuel utilisateur

bouncepad

bouncepad CADDY Manuel utilisateur

bouncepad

bouncepad Floorstanding Manuel utilisateur

bouncepad

bouncepad Flex Manuel utilisateur

bouncepad

bouncepad Lounge Manuel utilisateur

bouncepad

bouncepad Wing Freestanding Manuel utilisateur

bouncepad

bouncepad Floorstanding Slim Manuel utilisateur

bouncepad

bouncepad Sumo 270 Degrees Mounting Arm Manuel utilisateur

bouncepad

bouncepad Wing-Slim Manuel utilisateur

bouncepad

bouncepad Self-Service Mount Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur