43
How to Heat Transfer a T-shirt
We Will iron on a T-shirt in the following steps,and you can apply these instructions
to anything your heart desires.Such as purses,pillowcases,puzzles,phone case and soon.
Whatsapp(Wechat): +86 17705053273 Facebook: Bosstop
Trouble-shootings
1.Printing the image on heat transfer paper
by printer.
2.Outputting the image. 3.Adjusting the pressure knob.Clockwise
increase pressure.Counter clockwise
decrease it.
10.Removing the teflon sheet, set it aside as it
can be re-used. Peeling off the transfer paper.
Please make sure transfers are warm peel or
cold peel, and do it accordingly.
11.Finished. 12.This machine can transfer image on textile
fabric such as cotton, fiber, which is especially
suitable for promoted products.
4.Pressing the handle and testing pressure.
Pressing firmly.And adjust the suitable
pressure.
6.Pressing “OK” again and the screen shows
“P-2”,you need to set a working time by press
“▼””▲”.Press the “OK” button again,the
machine start heating up.
5.Connecting the power cord and turn on the
power switch. The display screen should
illuminate. Pressing the “OK” key, the screen
shows “P-1”, you need to set your work temp
by press “▼””▲”.
7.When the heat press reaches its setting
temperature,place your fabric on the bottom
platen.Laying a teflon sheet over the fabric,
pre-pressing the fabric for about 5 seconds
to make sure smooth.
9.It will beep at the end of countdown,
reminding you that it's done.Then press the
Timing Button to stop the beep.
8.Positioning heat transfer paper with image
facing down on fabric,and laying a teflon sheet.
Closing the handle and the machine start
heating transfer the fabric. Then press the
“Enter”Button,it will count down from setting
time.
Q:How to switch the temperature unit to Celsius？
A:Press and hold the “OK” key for 10 seconds,the display will show P-3,you can switch
between ℉ and ℃ outputs by press “▼””▲”.Press and hold again 10 seconds to exit
the setting page.
Q: What should I do if the screw at the handle is damaged?
A: Parts that are damaged within one year can be replaced free by us.
Q:Measuring temperature with a laser thermometer,the temperature on
the platen is not accurate!
A:If you encounter this situation,don't worry,pls contact our team mailbox,our technical
staffs will provide detailed operating instructions to help you handle this question.
Q:The timer does not work.
A:This machine has two countdown buttons,one is "Enter"button and the other is the
round red Timing button.Both can count down. If one button doesn't work, please try
another button.(Make sure to start pressing the timer button when the work
temperature is reached.)
Solve Your Problems
