Bosch CIP5000 Series Manuel utilisateur

CIP5000 series storage

CIP‑5316W‑00N / CIP‑5424W‑00N

en Quick installation guide

CIP5000 series storage Table of contents | en 3

Bosch Security Systems B.V. Quick installation guide 2019-10 | V01 | F.01U.380.028

Table of contents

1Safety 4

1.1 RoHS compliance 4

2About this guide 5

2.1 Introduction 5

3System overview 6

3.1 Front panel 6

3.2 Rear panel 6

3.2.1 Rear panel components 7

3.3 Secure cover 8

3.3.1 Install the cover 9

4Setup tasks 10

4.1 Task 1: unpacking 10

4.2 Task 2: install enclosure on the rack 10

4.3 Task 3: install disk drives 13

4.3.1 Drive slot numbering 13

4.3.2 Remove the drive carrier 14

4.3.3 Install 3.5" disk drive in the carrier 15

4.4 Task 4: establish I/O connections 15

4.4.1 Initial setup 16

4.4.2 Network connection 16

4.5 Task 5: connect power and power on 16

4.5.1 Power on 17

4.5.2 Front panel LED behavior 18

4.5.3 Disk drive LEDs 18

4.5.4 PSU LEDs 18

4.5.5 Rear panel LED behavior 19

4.6 Task 6: login to windows 19

4.7 Task 7: create logical drives 19

4.7.1 Log into management GUI 20

4.7.2 Choose a language 20

4.7.3 Create logical drives 20

4.7.4 Log out 24

4.8 System shutdown 24

5Technical support 25

6Disposal 26

4en | Safety CIP5000 series storage

2019-10 | V01 | F.01U.380.028 Quick installation guide Bosch Security Systems B.V.

1 Safety

Warning!

This is a Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Danger!

Consequences The electronic components within the enclosure are sensitive to damage from

Electro-Static Discharge (ESD). Observe appropriate precautions at all times when handling

the device or its subassemblies.

Warning!

Turn off the power and disconnect the power cord before servicing this device.

1.1 RoHS compliance

CIP5000 series storage

Hazardous substance table according to SJ/T 11364-2014

(Pb)

(Hg)

(Cd)

Cr 6+

(Cr 6+)

PBB

(PBB)

PBDE

(PBDE)

PCBA X O O O O O

Housing & enclosures X O O O O O

Cables O O O O O O

Power supply units X O O O O O

Batteries X O O O O O

This table was created according to the provisions of SJ/T 11364

O: The content of such hazardous substance in all homogeneous materials of such

component is below the limit defined in GB/T 26572

X: The content of such hazardous substance in a certain homogeneous material is above the

limit defined in GB/T 26572

CIP5000 series storage About this guide | en 5

Bosch Security Systems B.V. Quick installation guide 2019-10 | V01 | F.01U.380.028

2 About this guide

This document gives a brief overview of the CIP5000 series storage, and then provides

instructions to install the system hardware in the rack, and configure necessary network and I/

O device connections.

For more details on installation and operation of the CIP5000 series storage, refer to the User

manual.

2.1 Introduction

Models included in this guide

Model Interface Number of drives Power supplies Cooling units

CIP-5316W-00N 1000 BASE-T x 2 16 2 2

CIP-5424W-00N 1000 BASE-T x 2 24 2 2

6en | System overview CIP5000 series storage

2019-10 | V01 | F.01U.380.028 Quick installation guide Bosch Security Systems B.V.

3 System overview

This section gives an overview of the front panel, rear panel and secure cover of CIP5000

series storage.

3.1 Front panel

The front panel hardware components on the CIP-5316W-00N and CIP-5424W-00N are

identical except the number of drives.

Drive carriers Power and Status LEDs

Figure3.1: CIP-5316W-00N front view

Drive carriers Power and Status LEDs

Figure3.2: CIP-5424W-00N front view

Defective drives shall be replaced immediately in order to ensure data availability. If any drive

failed, a hot spare drive automatically replaces a failed drive, thus ensuring the fault-tolerant

integrity of the logical drive. The self-contained hardware-based RAID logical drives provide

maximum performance in a compact external enclosure.

3.2 Rear panel

The rear panel of CIP-5424W-00N is almost the same as the rear panel of the CIP-5316W-00N

except for its higher profile. The form factor of the CIP-5424W-00N is 4U and the form factor

of the CIP-5316W-00N is 3U.

The rear panel is where you connect power cables, I/O connections, IPMI port, audio out/in,

video (VGA), USB serial ports, COM1 (serial port) and SAS port Backend Controller card. Both

enclosures include PCIe slots for added system versatility.

CIP5000 series storage System overview | en 7

Bosch Security Systems B.V. Quick installation guide 2019-10 | V01 | F.01U.380.028

Figure3.3: CIP-5316W-00N rear view

Figure3.4: CIP-5424W-00N rear view

3.2.1 Rear panel components

The rear panel components of CIP-5316W-00N and CIP-5424W-00N are the same, and each

model has two power supply units (PSU).

4 6 7 95 8

1 PSU fan vents

2 Power inserts

3 System fan vents

4 PS/2 mouse/keyboard port

8en | System overview CIP5000 series storage

2019-10 | V01 | F.01U.380.028 Quick installation guide Bosch Security Systems B.V.

5 VGA port

6 DVI port

7 HDMI port

8 USB 3.0 (4 ports)

9 Optical SPDIF Out port

10 Audio In/Out ports

11 1000BASE-T RJ-45 (2 ports)

3.3 Secure cover

The CIP5000 enclosure include a secure cover for better physical security and to prevent

unintended or accidental removal of hard drives.

The cover are secured with a single tubular cam lock located near the left side of the cover.

Turn the key clockwise to lock, counter clockwise to unlock.

Tubular cam lock

Figure3.5: CIP-5316W-00N with secure cover (unlocked)

Tubular cam lock

Figure3.6: CIP-5424W-00N with secure cover (locked)

CIP5000 series storage System overview | en 9

Bosch Security Systems B.V. Quick installation guide 2019-10 | V01 | F.01U.380.028

3.3.1 Install the cover

Figure3.7: Installing or removing secure cover

To attach the secure cover:

1. Make sure the lock is in the unlocked position. To unlock, insert the key into the lock and

turn counter clockwise.

2. Insert the tab on the right side of the cover into the slot receptacle on the right handle.

3. Place the cover in position and push in the latch release (to the left of the keyhole).

4. Push the cover into position so that the tab on the right side inserts into the receptacle

on the right handle when releasing the latch.

5. Insert the key and turn clockwise to lock.

To remove the cover, unlock it, press the latch release on the left side and pull the left end out

first, holding it with both hands.

10 en | Setup tasks CIP5000 series storage

2019-10 | V01 | F.01U.380.028 Quick installation guide Bosch Security Systems B.V.

4 Setup tasks

Finish the basic setup tasks described in the guide.

4.1 Task 1: unpacking

Note that the two models are nearly identical, except for the number of disk drive bays.

Packing List

The box contains the following items:

– One of the following storage appliances:

– CIP-5316W-00N

– CIP-5424W-00N

– Two 1.83m (6 ft) power cords

– Screws for disk drives

– Front panel bezel cover

– Quick installation guide

– (Optional) Sliding rail assembly for rack mounting

4.2 Task 2: install enclosure on the rack

The instructions here apply to 3U 16-bay models CIP-5316W-00N and the JBOD expansion

CIP-5316-JBOD, as well as the 4U 24-bay model CIP-5424W-00N.

Caution!

Do not populate any enclosure hardware with hard drives until it has been securely installed

in the rack.

Caution!

At least two persons are required to safely lift, place, and attach the enclosure hardware into

a rack system.

Caution!

Do not lift or move the enclosure hardware by the handles, or power supplies. Hold the

system itself.

Caution!

Do not install the enclosure hardware into a rack without rails to support the system.

Caution!

Only a qualified technician who is familiar with the installation procedure should mount and

install the enclosure hardware.

Caution!

Mount the rails to the rack using the appropriate screws and flange nuts, fully tightened, at

each end of the rail.

Autres manuels pour CIP5000 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Bosch Stockage

Bosch

Bosch DIVAR IP 6000 (2U) Manuel utilisateur

Bosch

Bosch DVA-08K Manuel utilisateur

Bosch

Bosch 1200 Series IP Manuel utilisateur

Bosch

Bosch DVA-12T Manuel utilisateur

Bosch

Bosch 1200 Series Manuel utilisateur

Bosch

Bosch DSA E Series Manuel utilisateur

Bosch

Bosch DVAS Manuel utilisateur

Bosch

Bosch DVA-12T Manuel utilisateur

Bosch

Bosch CIP5000 Series Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur