Bosch ISW-BMC1-M82X Comment utiliser

Wireless Local Security Network wLSN

Release Notes October 2006

1.0 Compatibility

wLSN is compatible with the Easy Series V2+

Intrusion Control Panel.

2.0 Known Issues

2.1 General Information

CAUTION: If you have unused wireless

devices, replace the battery tabs or

remove the batteries to prevent battery

depletion.

•Returning a Device to an Undiscovered State:

In the wLSN Reference Guide (P/N: F01U009440),

Section 2.4 Site Testing explains how to return a

device to the undiscovered state. This explanation

is incorrect. Below is the correct procedure:

1. Remove the batteries.

2. Press and hold the tamper switch button.

3. Reinsert the batteries while holding the

tamper switch button.

The device’s LED turns on.

4. Release the tamper switch button within five

sec. after the device’s LED turns on.

The device returns to an undiscovered state.

•Magnet Placement for Door-Window Contact,

Mini Door-Window Contact, and Inertia

Detector: The magnet can be placed on either

side of these devices.

2.2 Mini Door-Window Contact

(ISW-BMC1-M82X)

Tamper Switch Location: Refer to Figure 1 for the

location of the tamper switch on the Mini Door-

Window Contact.

Figure 1: Tamper Switch Location

2.3 Recessed Door-Window Contact

(ISW-BMC1-R135X)

Tamper Switch Location: Refer to Figure 2 for the

location of the tamper switch on the Recessed Door-

Window Contact.

Figure 2: Tamper Switch Location

2.4 Glassbreak Detector

(ISW-BGB1-SAX)

•RF Signal Strength (RFSS) Mode LED

Location: Refer to Figure 3 for the location of the

LED that turns on when the detector enters RFSS

Mode.

Figure 3: RFSS Mode LED Location

www.boschsecuritysystems.com

F01U032063B

Release Notes

10/0

wLS

Page 2 of

•Entering RFSS Mode with Wall Tamper Tab

Removed:

1. Take the detector to its planned mounting

location.

2. Remove and reinsert the batteries.

3. Press and hold the wall tamper switch.

Refer to Figure 4.

4. Quickly press and release the cover tamper

switch four times. Refer to Figure 5.

The detector enters RFSS Mode.

Figure 4: Wall Tamper Switch Location

Figure 5: Cover Tamper Switch Location

•Returning a Glassbreak Detector with the

Wall Tamper Tab Removed to an

Undiscovered State:

1. Remove the batteries from the detector.

2. Place the detector on a flat surface to depress

the wall tamper switch.

Refer to Figure 4.

3. Press and hold the cover tamper switch.

Refer to Figure 5.

4. While both tamper switches are depressed,

reinsert the batteries.

The RFSS Mode LED turns on. Refer to

Figure 3 on page 1.

5. Release the cover tamper switch within five

sec. after the RFSS Mode LED turns on.

The detector returns to an undiscovered state.

2.5 wLSN Key Fob

(ISW-BKF1-H5X)

Programmable Buttons: To operate the

programmable buttons, press and hold either button

for at least 1 sec. Refer to Figure 6.

Figure 6: Programmable Button Locations

Autres manuels pour ISW-BMC1-M82X

Ce manuel convient aux modèles suivants

Autres manuels Bosch Système de sécurité

Bosch

Bosch FMC-300RW-GSRRD Manuel utilisateur

Bosch

Bosch MAP 5000 Series Manuel utilisateur

Bosch

Bosch Radion Specialty RFBT Manuel utilisateur

Bosch

Bosch ICP-VR8488 Manuel utilisateur

Bosch

Bosch DIVAR IP 7000 2U Manuel utilisateur

Bosch

Bosch BIS 2.3 Manuel utilisateur

Bosch

Bosch LTC 8016/90 Manuel utilisateur

Bosch

Bosch CC610PB Manuel utilisateur

Bosch

Bosch FMC-300RW-GSGRD Manuel utilisateur

Bosch

Bosch DIP-2040-00N Manuel utilisateur

Bosch

Bosch ODU-FA Mode d’emploi

Bosch

Bosch MIC-WKT-IR Manuel utilisateur

Bosch

Bosch CP050B Comment utiliser

Bosch

Bosch ISW-BKF1-H5X Manuel utilisateur

Bosch

Bosch DB18C3100R2 Manuel utilisateur

Bosch

Bosch SE 60 LSNi Manuel utilisateur

Bosch

Bosch Spexor Manuel utilisateur

Bosch

Bosch DIVAR IP all-in-one 7000 3U Manuel utilisateur

Bosch

Bosch SOLUTION 6000 Manuel utilisateur

Bosch

Bosch AMC UL1 Manuel utilisateur

Bosch

Bosch 844 Manuel utilisateur

Bosch

Bosch Spexor Manuel utilisateur

Bosch

Bosch DS7400XiV4-EXP Manuel utilisateur

Bosch

Bosch Solution 64 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur