Bosch VJR SERIES Manuel utilisateur

AutoDome Junior HD

VJR Series

en Installation Manual

AutoDome Junior HD Table of Contents | en 3

Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09

Table of Contents

1Safety 6

1.1 Important Safety Instructions 6

1.2 Safety Precautions 9

1.3 Important Notices 9

1.4 Customer Support and Service 16

2 Unpacking 17

2.1 Parts List 17

2.2 Safety Rules 18

3 Description 19

4 Installing a Surface Mount 21

4.1 Description 21

4.1.1 Additional Tools Required 21

4.1.2 Preparing the Surface Mount for an Indoor Installation 22

4.1.3 Installing the Camera to the Mounting Plate 23

5 Installing a Wall Mount 27

5.1 Description 27

5.1.1 Additional Tools Required 27

5.1.2 Preparing the Wall Mount for an Indoor Installation 28

5.1.3 Installing the Camera to the Mounting Plate 30

6 Installing a Recessed Mount 34

6.1 Description 34

6.1.1 Additional Requirements 34

6.1.2 Preparing the Ceiling for Installation 35

6.1.3 Installing the Camera to the Mounting Plate 38

7 Installing a Pipe Mount 43

7.1 Description 43

7.1.1 Tools/Supplies Required 43

7.1.2 Preparing the Ceiling for Installation 44

7.1.3 Installing the Camera to the Mounting Plate 47

4en | Table of Contents AutoDome Junior HD

F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

8 Preparing the Wiring 50

8.1 Power 50

8.2 Connecting the Power 50

8.2.1 Power Connections to Indoor Cameras 51

8.3 Ethernet Connection (IP models) 52

9 Audio, Alarms and Relay Connections 53

9.1 Alarm Input 53

9.2 Connecting Alarms (inputs 1 through 2) 54

9.2.1 Connecting a Normally Open Alarm 54

9.2.2 Connecting a Normally Closed Alarm 55

9.3 Alarm Outputs 56

9.3.1 Connecting an Open Collector Output 56

9.4 Audio Cables 57

10 Getting Started 58

10.1 Powering On 58

11 Using the IP Interface 59

11.1 Overview of Features 60

11.2 System Requirements 61

11.3 Connecting the AutoDome Junior HD to the PC 62

11.4 Configuring the AutoDome Junior HD Camera 63

11.4.1 Changing the Network Settings 64

11.5 The Livepage 66

11.5.1 Entering a Keyboard Control Command 71

11.6 Commissioning the AutoDome Junior Fixed Camera 73

11.7 Saving Snapshots 75

11.8 Recording Video Sequences 75

11.9 Processor Load 76

11.10 The RECORDINGS Page 76

AutoDome Junior HD Table of Contents | en 5

Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09

12 Configuring the AutoDome Junior HD 79

12.1 Basic Mode: Device Access 80

12.2 Basic Mode: Date/Time 82

12.3 Basic Mode: Network 82

12.4 Basic Mode: Encoder 83

12.5 Basic Mode: Audio 85

12.6 Basic Mode: Recording 85

12.7 Basic Mode: System Overview 86

13 Keyboard Commands by Number 87

14 Preventive Maintenance 88

15 Troubleshooting 89

15.1 AutoDome Junior Operation and Control 90

16 BVIP Firmware Updates 91

16.1 Upgrading the AutoDome Junior IP or HD 91

16.2 Beginning the Firmware Update Process 92

Index 93

6en | Safety AutoDome Junior HD

F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

1Safety

1.1 Important Safety Instructions

Read, follow, and retain for future reference all of the following

safety instructions. Heed all warnings on the unit and in the

operating instructions before operating the unit.

1. Cleaning - Unplug the unit from the outlet before cleaning.

Follow any instructions provided with the unit. It is

generally sufficient to use a dry cloth for cleaning, but a

moist lint-free cloth or leather shammy may also be used.

Do not use liquid cleaners or aerosol cleaners.

2. Heat sources - Do not install the unit near any heat

sources such as radiators, heaters, stoves, or other devices

(including amplifiers) that produce heat.

3. Ventilation - Any openings in the unit housing are provided

for ventilation to prevent overheating and ensure reliable

operation. Do not block or cover these openings. Do not

place the unit in an enclosure unless proper ventilation is

provided, or the manufacturer's instructions have been

adhered to.

4. Water - Do not use this unit near water, for example near a

bathtub, washbowl, sink, laundry basket, in a damp or wet

basement, near a swimming pool, or in any area classified

as a wet location. To reduce the risk of fire or electrical

shock, do not expose this unit to rain or moisture.

5. Object and liquid entry - Never push objects of any kind

into this unit through openings, as they may touch

dangerous voltage points or short out parts, which could

result in a fire or electrical shock. Never spill liquid of any

kind on the unit. Do not place objects filled with liquids,

such as vases or cups, on the unit.

6. Lightning - For added protection during a lightning storm,

or when leaving this unit unattended and unused for long

periods, unplug the unit from the wall outlet and

disconnect the cable system. This will prevent damage to

the unit from lightning and power line surges.

AutoDome Junior HD Safety | en 7

Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09

7. Control adjustment - Adjust only those controls specified

in the operating instructions. Improper adjustment of

other controls may cause damage to the unit. Use of

controls or adjustments, or performance of procedures

other than those specified, may result in hazardous

radiation exposure.

8. Overloading - Do not overload outlets and extension cords.

This can cause fire or electrical shock.

9. Power disconnect - Units with or without ON/OFF

switches have power supplied whenever the power cord is

inserted into the power source; however, the unit is

operational only when the ON/OFF switch is in the ON

position. The power cord is the main power disconnect

device for switching off the voltage for all units.

10. Power sources - Operate the unit only via the type of

power source indicated on the label. Before proceeding,

be sure to disconnect the power from the cable being

connected to the unit.

– For battery powered units, refer to the operating

instructions.

– For units supplied by an external power source, use

only the recommended or approved power supplies.

– For limited power source units, this power source

must comply with EN60950. Substitutions may

damage the unit or cause fire or shock.

– For 24 VAC units, the VG4-A-PSUxx Power Supply is

recommended to comply with EN 50130-4 Main

Supply Voltage Dips and Short Interruption

requirement and voltage applied to the unit's power

input should not exceed +/- 10% or 21.6-26.4 VAC.

User-supplied wiring must comply with local electrical

codes (Class 2 power levels). Do not ground the

supply at the terminals or at the unit's power supply

terminals.

– If unsure of the type of power supply to use, contact

your dealer or local power company.

8en | Safety AutoDome Junior HD

F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

11. Servicing - Do not attempt to service this unit yourself.

Opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified

service personnel.

12. Damage requiring service - Unplug the unit from the main

AC power source and refer servicing to qualified service

personnel when any damage to the equipment has

occurred, for example if:

– the power supply cord or plug is damaged

– exposure to moisture, water, and/or inclement

weather (rain, snow etc.)

– liquid has been spilled in or on the equipment

– an object has fallen into the unit

– the unit has been dropped or the unit cabinet is

damaged

– the unit exhibits a distinct change in performance

– the unit does not operate normally when the user

correctly follows the operating instructions.

13. Replacement parts - Be sure the service technician uses

replacement parts specified by the manufacturer, or that

they have the same characteristics as the original parts.

Unauthorized substitutions may cause fire, electrical

shock, or other hazards.

14. Safety check - Safety checks should be performed on

completion of service or repairs to the unit, to ensure that

the unit is in proper operating condition.

15. Installation - Install in accordance with the manufacturer's

instructions and in accordance with applicable local codes.

16. Attachments, changes, or modifications - Only use

attachments/accessories specified by the manufacturer.

Any change to or modification of the equipment not

expressly approved by Bosch could void the warranty or, in

the case of an authorization agreement, authority to

operate the equipment.

AutoDome Junior HD Safety | en 9

Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09

1.2 Safety Precautions

1.3 Important Notices

Accessories - Do not place this unit on an unstable stand,

tripod, bracket, or mount. The unit may fall, causing serious

injury to persons and/or severe damage to the unit. Use only

with the cart, stand, tripod, bracket, or table specified by the

manufacturer. When a cart is used, exercise caution and care

when moving the cart/apparatus combination to avoid tipping it

over, which could result in injury. Quick stops, excessive force,

or uneven surfaces may cause the cart/unit combination to

overturn. Mount the unit in line with the manufacturer's

instructions.

All-pole power switch - Incorporate an all-pole power switch,

with a contact separation of at least 3 mm in each pole, into the

electrical installation of the building. If it is needed to open the

housing for servicing and/or other activities, use this all-pole

DANGER!

This symbol indicates an imminently hazardous situation such

as “Dangerous Voltage” inside the product. If not avoided, this

will result in an electrical shock, serious bodily injury, or death.

WARNING!

Indicates a potentially hazardous situation. If not avoided, this

may result in minor or moderate injury. Alerts the user to

important instructions accompanying the unit.

CAUTION!

Indicates a potentially hazardous situation. If not avoided, this

may result in damage to property or risk of damage to the unit.

NOTICE!

This symbol indicates information or a company policy that

relates directly or indirectly to the safety of personnel or

protection of property.

10 en | Safety AutoDome Junior HD

F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

switch as the main disconnect device for switching off the

voltage to the unit.

Camera grounding - When mounting the camera in potentially

damp environments, ensure the system is grounded through

the metal housing of the unit (see section: Connecting the

Power).

Camera signal - Protect the cable with a primary protector if

the camera signal is over 140 feet, in accordance with NEC800

(CEC Section 60).

Coax grounding:

– Ground the cable system if connecting an outside cable

system to the unit.

– Connect equipment to the unit's inputs only after this unit

has had its grounding plug connected to a grounded outlet

or its ground terminal is properly connected to a ground

source.

– Disconnect the unit's input connectors from equipment

before disconnecting the grounding plug or grounding

terminal.

– Follow proper safety precautions, such as grounding, for

any device connected to this unit.

U.S.A. models only - Section 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information regarding proper

grounding of the mount and supporting structure, grounding of

the coax to a discharge unit, size of grounding conductors,

location of discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

Your Bosch product was developed and manufactured with

high-quality material and components that can be recycled and

reused. This symbol means that electronic and electrical

appliances that have reached the end of their service life must

be collected and disposed of separately from household waste

material. Separate collecting systems are usually in place for

disused electronic and electrical products. Please dispose of

these units at an environmentally compatible recycling facility,

in line with European Directive 2002/96/EC.

Autres manuels pour VJR SERIES

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Bosch Caméra de sécurité

Bosch

Bosch VDC?480 Series Manuel utilisateur

Bosch

Bosch LTC 0435 Series Manuel utilisateur

Bosch

Bosch FlexiDome NDC-455V03-21PS Manuel utilisateur

Bosch

Bosch WZ16 Manuel utilisateur

Bosch

Bosch AUTODOME IP starlight 5000i IR Manuel utilisateur

Bosch

Bosch VEI-Series Manuel utilisateur

Bosch

Bosch MIC-7130-PB4 Manuel utilisateur

Bosch

Bosch MIC-7502-Z30B Manuel utilisateur

Bosch

Bosch BasicDome Series Manuel utilisateur

Bosch

Bosch NBN-80052 Manuel utilisateur

Bosch

Bosch MIC IP dynamic 7000 HD Manuel utilisateur

Bosch

Bosch EXTEGRA IP 9000 FX Manuel utilisateur

Bosch

Bosch NIN-73013 Manuel utilisateur

Bosch

Bosch AUTODOME IP 5000i IR Manuel utilisateur

Bosch

Bosch GVS1000 Manuel utilisateur

Bosch

Bosch NDN-733 Manuel utilisateur

Bosch

Bosch NDN-932 Manuel utilisateur

Bosch

Bosch WZ20NXV550-0 Manuel utilisateur

Bosch

Bosch VCM8637/00T Manuel utilisateur

Bosch

Bosch LTC 1461-21 Manuel utilisateur

Bosch

Bosch DINION XF LTC 0495 Manuel utilisateur

Bosch

Bosch WZ14N4-0 Manuel utilisateur

Bosch

Bosch VEN-650V05-2A3 Manuel utilisateur

Bosch

Bosch LTC 0435 Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur