Bosch DINION 5000 IP Manuel utilisateur

DINION capture 5000 IP

NER Series

en Installation Manual

DINION capture 5000 IP Table of Contents | en 3

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01

Table of Contents

1Safety 7

1.1 Safety precautions 7

1.2 Important safety instructions 8

1.3 Important notices 11

1.4 FCC & ICES compliance 15

1.5 Bosch notices 17

2 Description 18

2.1 Parts List 18

3 Installing the DINION capture 19

3.1 Determining the Range 19

3.2 Determining the Angle 20

3.3 Mounting the DINION capture 21

3.4 Preparing the Wiring 24

3.4.1 Power Input Connections 25

3.4.2 Ethernet and Power Connections 25

3.4.3 Video Connection for Installation 25

3.5 Making the Connections 26

3.6 Connecting to a Coax Cable 27

3.7 Using a microSD Card 28

3.8 Resetting the DINION capture 5000 IP 29

3.9 Automatic Mode Switching 30

4 Configuration 33

4.1 Menu Navigation Keys 33

4.2 Install Menu 33

4.2.1 Pre-Defined Modes 34

4.2.2 Lens Wizard submenu 35

4.2.3 Network submenu 36

4.2.4 Default submenu 36

5 Browser connection 37

5.1 System requirements 37

5.2 Establishing the connection 38

4en | Table of Contents DINION capture 5000 IP

| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.

5.2.1 Password protection in camera 38

5.3 Protected network 38

5.4 Connecting to a hardware decoder 39

5.4.1 Alarm connection 39

5.5 Connection established 40

5.5.1 LIVEPAGE 40

5.5.2 RECORDINGS 40

5.5.3 SETTINGS 41

6 Operation via the browser 42

6.1 Livepage 42

6.1.1 Processor load 42

6.1.2 Image selection 43

6.1.3 Digital I/O 44

6.1.4 System Log / Event Log 44

6.1.5 Saving snapshots 45

6.1.6 Recording video sequences 45

6.1.7 Running recording program 45

6.1.8 Audio communication 46

6.2 Recordings page 47

6.2.1 Controlling playback 47

7 Basic Mode 49

7.1 Basic Mode menu tree 49

7.2 Device Access 50

7.2.1 Camera name 50

7.2.2 Password 50

7.3 Date/Time 51

7.4 Network 52

7.5 Encoder 53

7.6 Recording 53

7.6.1 Storage medium 53

7.7 System Overview 53

8 Advanced Mode 54

8.1 Advanced Mode menu tree 54

8.2 General 56

DINION capture 5000 IP Table of Contents | en 5

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01

8.2.1 Identification 56

8.2.2 Password 56

8.2.3 Date/Time 58

8.2.4 Display Stamping 59

8.3 Web Interface 61

8.3.1 Appearance 61

8.3.2 LIVEPAGE Functions 62

8.3.3 Logging 63

8.4 Camera 64

8.4.1 Mode 64

8.4.2 ALC 66

8.4.3 Shutter/AGC 67

8.4.4 Enhance 68

8.4.5 Encoder Profile 70

8.4.6 Encoder Streams 74

8.4.7 Privacy Masks 75

8.4.8 Audio 75

8.4.9 Installer Menu 77

8.5 Recording 78

8.5.1 Storage Management 79

8.5.2 Recording Profiles 82

8.5.3 Retention Time 83

8.5.4 Recording Scheduler 84

8.5.5 Recording Status 85

8.6 Alarm 86

8.6.1 Alarm Connections 86

8.6.2 Video Content Analyses (VCA) 89

8.6.3 VCA configuration- Profiles 90

8.6.4 VCA configuration - Scheduled 96

8.6.5 VCA configuration - Event triggered 98

8.6.6 Audio Alarm 99

8.6.7 Alarm E-Mail 100

8.6.8 Alarm Task Editor 102

8.7 Interfaces 103

8.7.1 Alarm input 103

8.7.2 Relay 103

8.8 Network 105

6en | Table of Contents DINION capture 5000 IP

| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.

8.8.1 Network Access 105

8.8.2 Advanced 109

8.8.3 Multicast 110

8.8.4 FTP Posting 112

8.8.5 Encryption 113

8.9 Service 113

8.9.1 Maintenance 113

8.9.2 Licenses 115

8.9.3 System Overview 115

A Dimensional Drawings 116

DINION capture 5000 IP Safety | en 7

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01

1Safety

1.1 Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous

situation such as "Dangerous Voltage" inside the product.

If not avoided, this will result in an electrical shock, serious

bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily

injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of

damage to the unit.

NOTICE!

This symbol indicates information or a company policy that

relates directly or indirectly to the safety of personnel or

protection of property.

8en | Safety DINION capture 5000 IP

| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.

1.2 Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Heed all warnings on the unit and in the

operating instructions before operating the unit.

1. Cleaning - Unplug the unit from the outlet before cleaning.

Follow any instructions provided with the unit. Generally,

using a dry cloth for cleaning is sufficient but a moist, fluff-

free cloth or leather shammy may also be used. Do not use

aerosol cleaners.

2. Heat Sources - Do not install the unit near any heat

sources such as radiators, heaters, stoves, or other

equipment (including amplifiers) that produce heat.

3. Object and liquid entry - Never push objects of any kind

into this unit through openings as they may touch

dangerous voltage points or short-out parts that could

result in a fire or electrical shock. Never spill liquid of any

kind in the unit.

4. Lightning - For added protection during a lightning storm,

or when leaving this unit unattended and unused for long

periods, unplug the power source and disconnect the

cable system. This will prevent damage to the unit from

lightning and power line surges.

5. Controls adjustment - Adjust only those controls specified

in the operating instructions. Improper adjustment of

other controls may cause damage to the unit. Use of

controls or adjustments, or performance of procedures

other than those specified, may result in hazardous

radiation exposure.

6. Overloading - Do not overload circuits. This can cause fire

or electrical shock.

7. Power cable protection - Protect the power cable from

foot traffic, from being pinched by items placed upon it,

and at cable's exit from the unit.

DINION capture 5000 IP Safety | en 9

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01

8. Power disconnect - Units have power supplied to the unit

whenever the power cord is inserted into the power

source. The power cord plug is the main power disconnect

device for switching off the voltage for all units.

9. Power sources - Operate the unit only from the type of

power source indicated on the label. Before proceeding,

be sure to disconnect the power from the cable to be

installed into the unit.

– For external power supplied units, use only the

recommended or approved power supplies.

– For limited power source units, this power source

must comply with EN60950. Substitutions may

damage the unit or cause fire or shock.

– For 24 VAC units, voltage applied to the unit's power

input should not exceed ±10%, or 26.4 VAC. User-

supplied wiring must comply with local electrical

codes (Class 2 power levels). Do not ground the

supply at the terminals or at the unit's power supply

terminals.

– If unsure of the type of power supply to use, contact

your dealer or local power company.

10. Servicing - Do not attempt to service this unit yourself.

11. Damage requiring service - Unplug the unit from the main

AC power source and refer servicing to qualified service

personnel when any damage to the equipment has

occurred, such as:

– the power supply cord or plug is damaged;

– internal exposure to moisture, water, and/or

inclement weather (rain, snow, etc.);

– liquid has been spilled in the equipment;

– an object has fallen into the unit;

– unit has been dropped;

– unit exhibits a distinct change in performance;

– unit does not operate normally when the user

correctly follows the operating instructions.

10 en | Safety DINION capture 5000 IP

| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.

12. Replacement parts - Be sure the service technician uses

replacement parts specified by the manufacturer, or that

have the same characteristics as the original parts.

Unauthorized substitutions may cause fire, electrical

shock, or other hazards.

13. Safety check - Safety checks should be performed upon

completion of service or repairs to the unit to ensure

proper operating condition.

14. Installation - Install in accordance with the manufacturer's

instructions and in accordance with applicable local codes.

15. Attachments, changes or modifications - Only use

attachments/accessories specified by the manufacturer.

Any change or modification of the equipment, not

expressly approved by Bosch, could void the warranty or,

in the case of an authorization agreement, authority to

operate the equipment.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Bosch Caméra de sécurité

Bosch

Bosch VCM8637/00T Manuel utilisateur

Bosch

Bosch LTC 0455 Series Manuel

Bosch

Bosch MIC IP ultra 7100i Manuel utilisateur

Bosch

Bosch EX40N Manuel utilisateur

Bosch

Bosch DHR-1600A-150A Manuel utilisateur

Bosch

Bosch VDC-250 Guide de l'utilisateur

Bosch

Bosch FlexiDomeVF VDM-345V03-20 Manuel utilisateur

Bosch

Bosch AUTODOME IP starlight 5000i Manuel utilisateur

Bosch

Bosch VOT-320V019L Manuel utilisateur

Bosch

Bosch MIC Series 400 Manuel utilisateur

Bosch

Bosch V1160 Series Manuel utilisateur

Bosch

Bosch FlexiDomeXF VDC-485V03-10 Manuel utilisateur

Bosch

Bosch EXTEGRA IP 9000 FX NXF-9x30 Manuel utilisateur

Bosch

Bosch WZ14 Manuel utilisateur

Bosch

Bosch FLEXIDOME IP starlight 8000i Manuel utilisateur

Bosch

Bosch LTC 1462/21 Manuel utilisateur

Bosch

Bosch FlexiDomeXT+ VDC-455V04-20 Manuel utilisateur

Bosch

Bosch FLEXIDOME corner 9000 MP Instructions de montage

Bosch

Bosch Dinion Manuel utilisateur

Bosch

Bosch VEZ Series Manuel utilisateur

Bosch

Bosch AUTODOME IP 5000i IR Manuel utilisateur

Bosch

Bosch VTC-206 Series Manuel utilisateur

Bosch

Bosch AUTODOME 7000 VG5-7230 Manuel utilisateur

Bosch

Bosch LTC 0610/11 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur