Bosch PHANTOM EDGE Manuel utilisateur

PHANTOM

EDGE

Discover the World of IoT

Table of Contents

List of components

Phantom Edge overview

Installation steps

Technical specification

Safety instructions

Uninstallation and End-of-Life disposal instructions

Content Pg No.Sl No.

List of components

Sl. No. Item Quantity

1Phantom Sensor Device 1

2LTE Antenna 2

3Wi-Fi Antenna 1

4Current Transformer (CT) with Connector set of 3

5CT Cable Extender (Optional) 1

6Voltage Connection Cable with Connector 1

7Cable Ties 4

8Mounting Screws 4

9Contact and Warranty Card 1

10 Drill Paper Guide 1

3 4

Asset Name/No:

Asset Location:

Facility Contact:

Phone Number:

www.boschphantom.com

PHANTOM EDGE

PHANTOM

EDGE

PHANTOM EDGE View

2.1 Front View

EthernetLED

Indicator

Voltage

Input

CT Input RS-232 Differential

Pressure Element

LTE

Antenna 1

Micro

Sim Slot

2.2 Right View

2.3 Left View 2.4 Back View

MICRO SIM

LTE

Antenna 2

Wi-Fi

Antenna

DOUBLE

INSULATION

ELECTRICAL

HAZARD

DO NOT OPEN

AUTHORISED

PERSONNEL ONLY

CAUTION

Technical Specifications &

Manufacturer Details Label

Hardware ID

VOLTAGE INPUT CT INPUT

LTE 1

LTE 2 Wi-Fi

00001

RBSGS18121RI1V1R

Installation Steps

3.1 SIM Card Insertion(Optional)

Gently pull the flap on its right side

to reveal the Micro SIM card slot

MICRO SIM

Close the Micro SIM cap

and fasten firmly

Insert Micro SIM into Phantom Edge

as per the marking sticker

MICRO SIM

LTE 1

If Wi-Fi connection is not available, use SIM card for it

Identify the location to mount Phantom Edge. Ensure that Phantom Edge is mounted

within 1 meter of radius from the point of CT installation.

Phantom Edge can be mounted in the following options:

a. b. c.

32mm

a. b.

3.2 Mounting

Connection

PHANTOM

EDGE

Option A: Mount Phantom Edge in a horizontal direction using stickers

Peel off the cover layer from

the backside of Phantom Edge

Mount the device in a horizontal direction

by using adhesive surface of the stickers.

Use the Drill Paper Guide and

mark the four locations to

drill on the target wall

Mount the Phantom Edge on

the wall using the four screws

provided in the kit

Drill holes of sufficient depth

to accommodate M4 screw

provided in the installation kit

Option B: Mount Phantom Edge on a vertical surface using screws

PHANTOM

EDGE

3.3 Antenna Connection

MICRO SIM

LTE 2

LTE 1

Wi-Fi

LTE 2 Wi-Fi

LTE 2

Insert LTE antenna 1 into LTE

antenna 1 port and rotate the

antenna nut in a clockwise

direction until it is firm.

Ensure not to overtighten.

Insert LTE antenna 2 into LTE

antenna 2 port and rotate the

antenna nut in a clockwise

direction until it is firm.

Ensure not to overtighten.

Insert Wi-Fi antenna into Wi-Fi

antenna port and rotate antenna

nut in a clockwise direction until it

is firm. Ensure not to overtighten.

Wi-Fi

Clamp CT around the

individual power cable for each

phase. Ensure that the front

surface of the CT and

line label, is oriented in the

direction of power source.

Ensure color code of the

power cable and line label

matches (Refer Exhibit 1).

Towards

power supply

Direction

of power

flow

Towards load

Identify each CT by line 1, 2

& 3 label behind the CT

b.a. c.

3.4 CT Connection

3.5 Voltage Connection

Line 1

Line 2 Line 3

Voltage

Connection

VOLTAGE INPUT CT INPUT

Connect the CT female

connector to the male

connector on Phantom Edge,

which is labelled as Current

Input

Identify the MCB switch

associated with relevant

electrical load/machine

Remove approx. 50mm of

insulation from wires.

Connect the four-individual

wire strands in the voltage

connector cable to the

appropriate points of the

four-pole MCB. Follow color

coding of the wire strands to

ensure correct connection

(Refer exhibit 1).

Connect the female connector

of this cable to the male

connector on Phantom Edge,

which is labelled as Voltage

Input

3.6 RS232 Connection(Optional)

RS232

3.7 Ethernet Connection(Optional)

VOLTAGE INPUT CT INPUT

Voltage

connection

Voltage

connection

VOLTAGE INPUT CT INPUT

RS232

Connection

Identify RS232 female connector

connected to machine PLC

Identify the recommended Amphenol

RJ45 Cable RCP-5SAMMM-SLM7Bxx

male connector connected to

machine PLC

Connect machine’s RJ45 ethernet male connector to the

RJ45 female port of Phantom Edge and rotate connector

nut in a clockwise direction to tighten it

Connect machine PLC RS232 female connector to the

male connector of Phantom Edge and tighten the screws

Use this option only If need to collect the data from a device using RS232 port

Use this option only If need to collect the data from a device using ethernet port

a. b.

Use the cable ties to secure and bundle the cables

Fill in the contact details of local technician and tag it on the voltage cable.

Ensure all details are correctly filled for emergency response.

3.8 Tidy Up

Tidy Up

Voltage

Connection

RS232 Connection

Ethernet Connection

Tidy Up

Voltage

Connection

RS232 Connection

Ethernet Connection

PHANTOM

EDGE

PHANTOM

EDGE

Autres manuels pour PHANTOM EDGE

Table des matières

Autres manuels Bosch Instrument de mesure

Bosch

Bosch GLM 50 C Instructions de montage

Bosch

Bosch Rexroth BOS 6000 Manuel utilisateur

Bosch

Bosch GLM 30 Professional Manuel utilisateur

Bosch

Bosch GLM 15 Instructions de montage

Bosch

Bosch ISN-GMX-P3S Manuel utilisateur

Bosch

Bosch GLM 150 Professional Manuel utilisateur

Bosch

Bosch GLL 2-20 Professional Manuel utilisateur

Bosch

Bosch GTL 3 Professional Manuel utilisateur

Bosch

Bosch D-tect200C Instructions de montage

Bosch

Bosch Rexroth SD301 Manuel utilisateur

Bosch

Bosch Deepfield Connect Manuel utilisateur

Bosch

Bosch LR 1 Professional Manuel utilisateur

Bosch

Bosch GLL 2-10 Professional Manuel utilisateur

Bosch

Bosch PLR 50 Manuel utilisateur

Bosch

Bosch GLR225 Instructions de montage

Bosch

Bosch GLM 150 C Manuel utilisateur

Bosch

Bosch LR 24 Professional Manuel utilisateur

Bosch

Bosch 200 C Manuel utilisateur

Bosch

Bosch BL 40 VHR PROFESSIONAL Manuel utilisateur

Bosch

Bosch Professional BLE 200 Manuel utilisateur

Bosch

Bosch GLL 30 G Manuel utilisateur

Bosch

Bosch BAT 131 Manuel utilisateur

Bosch

Bosch BSA 42 Series Manuel utilisateur

Bosch

Bosch PLR 40 C Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur