Bosch FLEXIDOME IP panoramic 6000 IC Manuel utilisateur

FLEXIDOME IP panoramic

6000/7000 IC

NFN-60122 | NFN-70122

en Installation Manual

Table of contents

1Safety 5

1.1 Safety message explanation 5

1.2 Safety precautions 5

1.3 Important safety instructions 6

1.4 FCC and ICES compliance 7

1.5 Notices 8

2Short information 9

3System overview 10

3.1 Application variants 10

3.2 Using the camera 10

3.3 Operation with external systems 11

3.3.1 Larger surveillance systems 12

4Planning information 13

4.1 Unpacking 13

4.2 Contents 13

4.3 System requirements 14

5Installation 15

5.1 Local storage 15

5.2 Painting the cover plate 16

5.3 Mounting the camera 17

5.4 Uninstalling the camera 20

6Connection 22

6.1 Network (and PoE power) 22

7Configuration 23

7.1 Browser connection 23

7.1.1 Establishing the connection 23

7.1.2 Protected network 23

7.1.3 Set-up with web browser 24

8Troubleshooting 25

8.1 Resolving problems 25

8.2 Testing the network connection 27

8.3 Customer service 27

FLEXIDOME IP

panoramic 6000/7000 IC Table of Contents | en 3

Bosch Security Systems 2016.08 | v1.0 | AM18-Q0707

9Maintenance 28

9.1 Cleaning 28

9.1.1 Lens cleaning 28

9.2 Repair 28

9.3 Reset 29

10 Decommissioning 30

10.1 Transfer 30

10.2 Disposal 30

11 Technical data 31

11.1 Specifications 31

11.2 Dimensions 37

4en | Table of Contents FLEXIDOME IP

panoramic 6000/7000 IC

2016.08 | v1.0 | AM18-Q0707 Bosch Security Systems

Safety

Safety message explanation

Caution!

Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Notice!

Indicates a situation which, if not avoided, could result in

damage to the equipment or environment, or data loss.

Safety precautions

Caution!

Installation should only be performed by qualified service

personnel in accordance with the National Electrical Code

(NEC 800 CEC Section 60) or applicable local codes.

1.1

1.2

FLEXIDOME IP

panoramic 6000/7000 IC Safety | en 5

Bosch Security Systems 2016.08 | v1.0 | AM18-Q0707

Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Follow all warnings before operating the

device.

1. Clean only with a dry cloth. Do not use liquid cleaners or

aerosol cleaners.

2. Do not install device near any heat sources such as

radiators, heaters, stoves, or other equipment (including

amplifiers) that produce heat.

3. Never spill liquid of any kind on the device.

4. Take precautions to protect the device from power and

lightning surges.

5. Adjust only those controls specified in the operating

instructions.

6. Operate the device only from the type of power source

indicated on the label.

7. Unless qualified, do not attempt to service a damaged

device yourself. Refer all servicing to qualified service

personnel.

8. Install in accordance with the manufacturer's instructions in

accordance with applicable local codes.

9. Use only attachments/accessories specified by the

manufacturer.

10. Protect all connection cables from possible damage,

particularly at connection points.

1.3

6en | Safety FLEXIDOME IP

panoramic 6000/7000 IC

2016.08 | v1.0 | AM18-Q0707 Bosch Security Systems

FCC and ICES compliance

FCC & ICES Information

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

– reorient or relocate the receiving antenna;

– increase the separation between the equipment and

receiver;

– connect the equipment into an outlet on a circuit different

from that to which the receiver is connected;

– consult the dealer or an experienced radio/TV technician

for help.

Intentional or unintentional modifications, not expressly

approved by the party responsible for compliance, shall not be

made. Any such modifications could void the user's authority to

operate the equipment. If necessary, the user should consult the

dealer or an experienced radio/television technician for

corrective action.

The user may find the following booklet, prepared by the

Federal Communications Commission, helpful: How to Identify

and Resolve Radio-TV Interference Problems. This booklet is

available from the U.S. Government Printing Office, Washington,

DC 20402, Stock No. 004-000-00345-4.

1.4

FLEXIDOME IP

panoramic 6000/7000 IC Safety | en 7

Bosch Security Systems 2016.08 | v1.0 | AM18-Q0707

Notices

Notice!

Optical elements are sensitive and should be protected at all

times. Do not allow objects to come into contact with glass

surfaces and do not touch optical elements with your fingers.

Notice!

Video loss is inherent to digital video recording; therefore,

Bosch Security Systems cannot be held liable for any damage

that results from missing video information.

To minimize the risk of losing information, we recommend

multiple, redundant recording systems, and a procedure to

back up all analog and digital information.

Notice!

We recommend that memory cards only be used for local

storage of alarm recordings.

1.5

8en | Safety FLEXIDOME IP

panoramic 6000/7000 IC

2016.08 | v1.0 | AM18-Q0707 Bosch Security Systems

Short information

This manual has been compiled with great care and the

information it contains has been thoroughly verified. The text

was correct at the time of printing, however, the content can

change without notice. Bosch Security Systems accepts no

liability for damage resulting directly or indirectly from faults,

incompleteness or discrepancies between this manual and the

product described.

Trademarks

All hardware and software product names used in this document

are likely to be registered trademarks and must be treated

accordingly.

More information

For more information please contact the nearest Bosch Security

Systems location or visit www.boschsecurity.com

http://www.boschsecurity.com/catalog_overview.htm

FLEXIDOME IP

panoramic 6000/7000 IC Short information | en 9

Bosch Security Systems 2016.08 | v1.0 | AM18-Q0707

System overview

This discreet, aesthetic camera mounts flush in a ceiling or wall.

Its easily-painted cover plate blends in with almost all

surroundings. The 12MP sensor operating at 30 fps provides full

panoramic surveillance with complete area coverage, fine details

and high speeds. The camera offers full situational awareness

and simultaneous E-PTZ views in high resolution.

The 360° version of the camera, when mounted centrally on a

ceiling, gives complete wall‑to‑wall coverage. The 180° version

has a higher effective resolution and is ideal for wall mounting

or for ceiling mounting in corridors.

Application variants

The camera has a choice of application variants that set up the

camera for optimum performance in a specific environment.

Select the application variant best suited to your installation.

The application variant must be selected before any other

changes are made, as the camera reboots automatically and

resets the factory defaults when the application variant is

changed.

This camera has the following application variants:

– Client-side dewarping

– Edge dewarping

Using the camera

To access the features of the camera, use a web browser. The

browser provides live viewing of the camera streams in the

interface window, and also allows you to access and change the

extensive list of settings and parameters for camera

configuration. Refer to the software manual for more

information on the browser interface.

3.1

3.2

10 en | System overview FLEXIDOME IP

panoramic 6000/7000 IC

2016.08 | v1.0 | AM18-Q0707 Bosch Security Systems

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Bosch Caméra IP

Bosch

Bosch NWC-0455-20P Manuel utilisateur

Bosch

Bosch LTC 7960 Series Manuel utilisateur

Bosch

Bosch AN traffic 4000 IR Manuel utilisateur

Bosch

Bosch NDC-455 Manuel utilisateur

Bosch

Bosch NDC-265-P Manuel utilisateur

Bosch

Bosch NDP-5512-Z30 Manuel utilisateur

Bosch

Bosch A1 Security Cameras IR Illuminator 5000... Manuel d'installation et d'exploitation

Bosch

Bosch NBC-225-P Manuel utilisateur

Bosch

Bosch Onvif NTC-255-PI Manuel utilisateur

Bosch

Bosch NIN-51022-V3 Manuel utilisateur

Bosch

Bosch DINION 4000 Manuel utilisateur

Bosch

Bosch NBC-265-W Manuel utilisateur

Bosch

Bosch NBC-265-P Manuel utilisateur

Bosch

Bosch FLEXIDOME IP NIN-70122 Manuel utilisateur

Bosch

Bosch NTC-265-PI Manuel utilisateur

Bosch

Bosch NDN-50022-A3 Manuel utilisateur

Bosch

Bosch LTC 9450 Series Unity Dome Manuel utilisateur

Bosch

Bosch MIC Series 550 Manuel utilisateur

Bosch

Bosch NBC-455 Manuel utilisateur

Bosch

Bosch NDN-921 Manuel utilisateur

Bosch

Bosch NBC-255-P Manuel utilisateur

Bosch

Bosch NDC-225-PI Manuel utilisateur

Bosch

Bosch DinionHD NBN-832 Manuel utilisateur

Bosch

Bosch NFN-70122 Manuel utilisateur

Manuels Caméra IP populaires d'autres marques

FLIR

FLIR Exx series Manuel utilisateur

Avigilon

Avigilon H4A-BO1-IR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuel utilisateur

ShareTech

ShareTech AV1 Manuel utilisateur

Ezviz

Ezviz C6C Manuel utilisateur

Melchioni

Melchioni UCAM 2015 Manuel utilisateur

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuel utilisateur

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuel utilisateur

Mitel

Mitel 6800i Series Manuel de service

Vitek

Vitek VTC-IR403-212NP Manuel utilisateur

THOMSON

THOMSON DSC - 323W Manuel utilisateur

AVer

AVer FB2027 Manuel utilisateur

ENFORCER

ENFORCER EV-T5105-N2SQ Manuel utilisateur

Wansview

Wansview NC543 Manuel utilisateur

Eneo

Eneo MCB-64A0003M0A Manuel utilisateur

deView electronics

deView electronics CBDNI36F Manuel utilisateur

Swann

Swann SwannEye Manuel utilisateur

LevelOne

LevelOne IP CamSecure Manuel utilisateur