Bosch Smart Home Controller AA Manuel utilisateur
LET´S GET
STARTED
EN | Instruction Manual
Smart Home
Controller
3
Dear customer,
Congratulations on purchasing your Bosch
Smart Home Controller. It is the basic compo-
nent for making your home smarter.
With the Bosch Smart Home Controller, you
will be able to network all of your Bosch Smart
Home products digitally. And, thanks to the
Bosch Smart Home app, you will be able to
control them conveniently from anywhere. For
a safe life, comfortable heating and an optimal
living environment.
We hope you enjoy your new product.
Yours, the Bosch Smart Home Team
TABLE OF CONTENTS
1.0 PRODUCT DESCRIPTION ...............................4
1.1 Intended use 4
2.0 IN THE BOX.....................................................5
3.0 WARNING NOTICES........................................6
3.1 Explanation of symbols 6
3.2 Safety instructions 6
4.0 INDICATORS AND CONTROLS ........................7
4.1 Product overview 7
5.0 INSTALLATION AND SETUP.............................8
5.1 Installing the Smart Home Controller 8
5.2 Downloading the app 9
5.3 Configuring the Smart Home Controller 10
5.4 Adding further devices 10
5.5 Adding more smartphones/tablets 10
6.0 FIXING ..........................................................11
6.1 Wall mounting 11
7.0 MAINTENANCE AND CARE ...........................12
8.0 PRODUCT DETAILS .......................................13
8.1 Technical data 13
8.2 Declaration of conformity 14
8.3 Faults in radio operation 14
8.4 Open-Source-Software 14
8.5 Environmental protection and disposal 14
9.0 FURTHER INFORMATION..............................15
4
1.0 PRODUCT DESCRIPTION
As the heart of the system, the Smart Home
Controller bundles all information and coordi-
nates the communication between the Bosch
Smart Home components. And, thanks to the
Bosch Smart Home app, you will be able to
control them conveniently from anywhere. Your
Smart Home Controller is updated automatically
so that it remains up to date at all times. All
system data is saved locally in the device, thus
ensuring that your data remains secure.
1.1 Intended use
The product may only be used indoors with Bosch
Smart Home original components and recom-
mended partner products.
▶ Follow the safety instructions and the direc-
tions in this manual and the Bosch Smart
Home app to ensure that the product is set up
correctly.
▶ Please note the details in the Technical Data
section (see p. 13).
▶ Avoid dust, moisture, vibrations, constant sun
or other sources of heat radiation, cold and
mechanical stress.
Do not modify the product in any way. Any
other use is considered unintended use. We
will not assume liability for any resulting
damage.
5
To operate the Smart Home Controller and,
therefore, network all Bosch Smart Home
products, you will need the app, an internet
connection and a standard WLAN router with
a free LAN port.
2.0 IN THE BOX
Controller Wall mount 2 dowels,
2 screws
Power cable Network cable
6
3.0 WARNING NOTICES
3.1 Explanation of symbols
Warning.
This alerts you to danger.
Info.
Indicates important information.
3.2 Safety instructions
Fire hazard due to electric current!
If the electrical connection is not used as
intended, there is a risk of fire. Only use the
product with the original power cable.
The device may only be connected to an
easily accessible mains socket. In case of
danger, the mains plug must be pulled out
of the socket.
The device is not a toy! Do not allow chil-
dren to play with it. Do not leave packaging
material lying around carelessly. Plastic foils
and small parts can become dangerous toys
for children.
Due to external circumstances such as a
break in radio communication with the
Smart Home Controller, it cannot always
be guaranteed during remote or automat-
ed appliance control that commands are
actually executed or the correct appliance
status is displayed in the app and on other
Smart Home display devices (e.g. a Twist).
This may result in damage to property and/
or injury.
In this case:
▶ Please ensure as far as possible that no-
one is at risk during remote operation or
automated control.
▶ Please exercise particular caution when
setting up or adjusting a remote or
automated control and regularly check the
desired operation mode.
7
4.0 INDICATORS AND CONTROLS
4.1 Product overview
Item Part Explanation
1Power LED Operating status indicator (on/off)
2Function button For making settings
3Network LED Network connection indicator
4Cloud LED Internet connection indicator
5System button For resetting the device
6USB port Port for USB connection
7QR code Scan for device identification
8Network connection Connection to a LAN network
9Power connection Connection to the power supply
Front side Rear side
1
2
3
4
5
6
7
8
9
8
5.0 INSTALLATION AND SETUP
5.1 Installing the Smart Home Controller
1) After initialization, the cloud LED flashes when data is being exchanged via the tunnel connection.
Insert the network cable into the Smart Home
Controller and into a free LAN port on your WLAN
router. Now use the power cable to connect the
controller to the plug socket. After the device
starts, the LEDs show the initialization status
using flash codes (see table).
When you connect the Smart Home Control-
ler to the internet for the first time, it will
automatically search for software updates. If
an update is required, it will be downloaded
automatically by the Smart Home Controller
and installed. This process may take up to
30 minutes. The Smart Home Controller can
be commissioned during this period.
www
Blink codes during initialization and normal operation
Status LED state
Start All three LEDs are lit up red for a few seconds
Start-up
Power LED flashes white: The device is starting up
Power LED is lit up white: The device has started up
Power LED flashes red: Start-up failed
Establish
network connection
Network LED flashes white: Device is searching for a network connection
Network LED lit up white: Network connection has been established
Network LED flashes red: Network connection failed
Establish connection
to Bosch Cloud
Cloud LED flashes white: Update is downloaded from the Bosch Cloud1)
Cloud LED is lit up white: Remote access via the Bosch cloud is established
Cloud LED flashes red: Bosch cloud connection failed
9
5.2 Downloading the app
Before you start
Make sure that you download the Bosch
Smart Home app. You will need it for the
entire installation, configuration and control.
For Android devices For Apple iOS devices
▶Load up Google Play
▶Search for “Bosch Smart Home”
▶Select the “Bosch Smart Home app”
▶Tap “Install”
▶Load up the App Store
▶Search for “Bosch Smart Home”
▶Select the “Bosch Smart Home app”
▶Tap “Get”
For assistance with installing your Bosch
Smart Home Controller, you may also refer
to the explanatory video on our website:
www.bosch-smarthome.com/installation
WLAN access required
To set up the controller, you must have the
Bosch Smart Home app on your mobile
devices and be within range of the WLAN
network router.
10
5.3 Configuring the Smart Home Controller
The Smart Home Controller must be the first
device in your system that you connect with the
app. Afterwards, you can connect additional
Bosch Smart Home products and expand your
system. Start the app and wait until it has
detected the Smart Home Controller.
The app will prompt you to scan the QR code on
the product. You will find the QR code on the
rear side of the Smart Home Controller.
From this point, the app guides you through
the installation process.
5.4 Adding further devices
Once the Smart Home Controller has been com-
pletely installed, you can add further products
to your Bosch Smart Home system through the
app.
To do this, follow the instruction manual for the
relevant device.
5.5 Adding more smartphones/tablets
If you would like to use the Bosch Smart Home
System on other mobile devices, the app must
also be installed on these mobile devices.
Then open the app and follow the instructions.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Bosch Contrôleurs
Bosch
Bosch MPC 2000 A Manuel utilisateur
Bosch
Bosch AMC2 Series Manuel utilisateur
Bosch
Bosch LTC 8600 Manuel utilisateur
Bosch
Bosch Rexroth IndraDrive CsDrive System with HCS01 Manuel utilisateur
Bosch
Bosch System Controller Manuel utilisateur
Bosch
Bosch Twist Manuel utilisateur
Bosch
Bosch ARC C-2 Manuel utilisateur
Bosch
Bosch CC 100 M Manuel utilisateur
Bosch
Bosch Rexroth IndraMotion MTX micro Fiche d'information produit
Bosch
Bosch AMC2 Series Manuel utilisateur
Bosch
Bosch Rexroth OptiFeed-FS EcoDrive 03 FLP04VRS Instructions d'utilisation et d'installation
Bosch
Bosch rexroth ctrlX CORE Manuel utilisateur
Bosch
Bosch AMC2 Series Manuel utilisateur
Bosch
Bosch DSA E Series Manuel utilisateur
Bosch
Bosch Rexroth IndraDrive C HCS03.1 Manuel technique
Bosch
Bosch Intuvia BUI255 Manuel utilisateur
Bosch
Bosch EasyControl CT200 Manuel utilisateur
Bosch
Bosch BRC3100 Manuel utilisateur
Bosch
Bosch Worcester TDS 10 Manuel utilisateur
Bosch
Bosch Access Modular Controller 2 Manuel utilisateur
