10 11
TROUBLESHOOTING
Failure/Issue Solution
Е1/Overheat Let the device body cool down.
Then fill the kettle with water.
E2/Device
malfunction
You need bring to a BORK
authorized service center.
• Make sure the mains voltage correspond
tothedevice parameters prior of using it.
• Connect the device to grounded sockets only
(if grounding is not implemented
inconformance to the local regulations,
themanufacturer/manufacturer’s authorized
representative disclaims any indemnity liability).
• Proceed with caution using a kettle filled with
hot water.
• To avoid burns, do not touch the kettle body,
only use the handle. Be careful with the hot
steam coming out of the lid.
• Do not open the kettle lid during water heating
or just after switching off.
• Use the kettle for water heating only.
• Do not put the kettle in close vicinity to heat
sources or onto uneven surfaces.
• Do not put the kettle close to items that may
bedeformed by heating.
• Do not fill the kettle with water above
themaximum level to avoid spillage
ontheconnector.
• If the kettle is overfilled, boiling water may
beejected.
• This appliance is intended to be used
inhousehold and similar applications such as:
– Staff kitchen areas in shops, offices and other
working environments;
– Farm houses;
– By clients in hotels, motels and other
residential type environments;
– Bed and breakfast type environments.
• The heating element surface is subject
toresidual heat after use.
• It is necessary to remove scaling from thekettle
on a regular basis, see the Cleaning and
care section. Scaling can change the internal
surface color, cause an excessive noise
during operation, kettle switching-off issues
upon reaching the selected temperature,
andincrease the water heating time.
• The kettle is only to be used with the stand
provided.
• Warning: Avoid spillage on the connector.
• Warning: Potential injury from misuse.
• Appliances can be used by persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved.
• The device is not a measuring instrument.
Indication errors may take place due to external
influence.
• Do not remove the nameplate specifying
thedevice serial number and data and
donotlet it get damaged. It is required
for precise device identification in case
ofa malfunction.
• This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall
notbemade by children without supervision.
• Keep the appliance and its cord out of reach
ofchildren aged less than 8 years.
• The device may be transported in the original
package only and in a fixed vertical position.
• This appliance is intended to be used
inhousehold and similar applications.
• Dispose of the device in conformance
toandmeeting the local legislative requirements
ofthecountry of use.
