Document Number ENG_TEL_A002
Bonso Group
Rev # 00
Title : BS004 APPROVAL DOCUMENTS
Application : FCC APPROVAL Release Date : 12 May 2005 Page 33 of 39
2. Press the and buttons to set the VOX on or off. An “on” or “oF” will appear on
the display during setting.
3. To exit the Menu, press PTT button.
Beep Tone On/Off : To enable the Beep tone,
1. Press the button repeatedly until the “bp” appears on the display.
2. Press the and to set the Beep tone on or off. An “on” or “oF” will appear on
the display during setting.
3. To exit the Menu, press PTT button.
Roger Beep Tone : Whenever you release the PTT button, a “Roger Beep” tone may be transmitted to
let your friends know you are finished talking. To enable the Roger Beep ;
1. Press the button repeatedly until the “rb” appears on the display.
2. Press the and to set the Roger Beep tone on or off. An “on” or “oF” will
appear on the display during setting.
3. To exit the Menu, press PTT button.
TX Power Hi/Low :. To select the TX Power Hi or Low;
1. Press the button repeatedly until the “Po” appears on the display.
2. Press the and buttons to set the priority channel. . An “Hi” or “Lo” will appear
on the display during setting.
3. Press the PTT button to save the priority channel.
Manner Mode : In the silent place, if the call receipt is O.K, it can be sent out short beep.
To enable the Manner mode,
1. Press the button repeatedly until the “ ” appears on the display.
2. Press the and buttons to set the Manner mode on or off. An “on” or “oF” will
appear on the display during setting.
3. To exit the Menu, press PTT button.
Baby Monitor Mode : The BS-004 is able to monitoring the baby. To enable the Baby monitor ;
1. Press the button repeatedly until the “ ” appears on the display.
2. Press the and buttons to set the Baby monitor on or off. An “oF” , “b1” or “b2”
will appear on the display during setting. The “b1” is master (TX /Baby side), “b2” is slaver
(RX).
3. To exit the Menu, press PTT button.
