Trail Camera - BG330
Make sure the SD card is unlocked before inserting it
into the camera
The camera will operate normally with a locked SD card
inserted, but the card will not be able to store captured images
or videos taken by the camera.
Do not remove the SD card while the camera is on
By removing the SD card while the camera is on risks damaging
the internal components of the camera.
If you experience any problems with an inserted SD
card
Try reformatting the SD card utilizing the camera’s main
settings option.
2.3 Camera Modes
The different modes are accessed by pressing the OK button,
marked on the camera:
SETUP Mode/Test Mode
To turn on the camera, press and hold the OK button, until the
display screen activates. In this mode you can customize the
camera settings,or play back pictures and videos the camera
has taken on the LCD display. After switching the camera to the
ON position and if the camera is left alone for more than 20
seconds, the camera will automatically switch to "Hunting"
Mode, as described below.
