Bolid Proxy-KeyAV Manuel utilisateur

STANDALONE ACCESS CONTROLLERS

WITH BUILT-IN PROXIMITY READER AND KEYPAD

Proxy-KeyAV, Proxy-KeyAH, Proxy-KeyMV, Proxy-KeyMH

Instruction Manual

1DESCRIPTION

1.1 Purpose

1.1.1 Standalone access controllers with built-in proximity reader and keypad Proxy-KeyAV, Proxy-

KeyAH, Proxy-KeyMV, Proxy-KeyMH (hereinafter referred to as the controllers) are designed for

entering PINs and reading unique codes of proximity cards.

1.1.2 The controllers are non-recoverable, periodically serviced equipment.

1.1.3 The controllers are not designed to be used in corrosive and dusty environments as well as in fire and

explosion hazardous premises.

1.2 Specifications

Table 1.2.1

No. Characteristic Value

1.2.1 Power voltage - 10 through 15 V dc

1.2.2 Average Consumed Current - 200 mA

1.2.3 Power Input - 1

1.2.4 Pre-operation Time - 1 s

1.2.5 Credential Capacity - 1000 ones

1.2.6 Password Capacity - 8 ones

1.2.7 Relays - 2

1.2.8 Relay Switched Voltage - 24 V dc

1.2.9 Relay Switched Current - 2 A

1.2.10 Ingress Protection Rating as per GOST 14254-2015 - IP65

1.2.11 Resistance to mechanical stress as per OST 25 1099-83 - Category 3

1.2.12

Vibration loads:

- Frequency

- Max acceleration

- 1-35 Hz; (for Category 3)

- 0.5g (for Category 3)

1.2.13 Climatic Category as per OST 25 1099-83 - О3

1.2.14 Operating Temperature - Minus 35 through +50°С

1.2.15 Relative Humidity - 0 to 95%

1.2.16 Weight - 0.5 kg

1.2.17

Overall Dimensions:

Proxy-KeyAV, Proxy-KeyMV

Proxy-KeyAH, Proxy-KeyMH

- 50.2 × 160.2 × 21 mm

- 86.2 × 120.2 × 21 mm

1.2.18 Non-stop Operation - 24/7

1.2.19 MTBF in quiescent mode - 80000 hours

1.2.20 Non-failure Operation Probability - 0.98758

1.2.21 Average Lifetime - 8 years

1.2.22 The device meets the requirements of man-maid noise standards for the equipment of Class “Б” as

per GOST R 51318.22.

1.2.23 As to immunity to man-maid radio disturbance the device meets the requirements of the third test

level as per GOST R 50009.

1.3 Standard Delivery

1.3.1 Find the following unpacking the controller (see Table 1.3.1)

Table 1.3.1

Item Q-ty

Proxy-KeyAV (Proxy-KeyAH, Proxy-KeyMV, Proxy-KeyMH) 1

Instruction Manual 1

Proximity card

Diode FR-107

Mounting bracket

Torx screw T10 for fastening on the bracket

Torx T10 wrench

Woodscrew and wall plug:

Proxy-KeyAV, Proxy-KeyMV

1 pc.

2 pcs.

4 pcs.

2OPERATING

Operating restrictions, structure, mounting, wiring, programming, testing operability and operation of

the controller are described in its User’s Manual which can be found online at bolid.ru in the section

PRODUCTS at the page of Proxy-KeyAV (Proxy-KeyAH, Proxy-KeyMV, Proxy-KeyMH)

3MAINTENANCE

3.1 Maintenance works shall be carried out at by electricians with safety qualification level II or higher.

3.2 The controller is to be maintained according to a scheduled-preventive system which provides annual

maintenance.

3.3 Maintenance works for the controller are described in its User’s Manual which can be found online at

bolid.ru in the section PRODUCTS at the page of Proxy-KeyAV (Proxy-KeyAH, Proxy-KeyMV, Proxy-

KeyMH).

4REPAIR

4.1 Current repair of a defective product shall be carried out by the manufacturer or at authorized repair

centers. The product shall be sent for repair in line with established procedures.

4.2 A product’s failure which resulted from consumer’s not observing mounting or operation rules is

not a reason for claims and warranty repair.

4.3 Claims shall be submitted to the following address:

WARNING

The equipment shall be submitted for repair being assembled and clean along with all the

parts listed in the documentation.

Claims are accepted if only a reclamation report describing the failure is applied.

NVP BOLID CJSC, 4 Pionerskaya Str., Korolyov city, Moscow region, 141070, Russia

Tel./Fax: +7 (495) 775-71-55 (multiline). E-mail:[email protected].

4.4 In case of any issue related to operating the product, please contact with the technical support: +7

(495) 775-71-55 or e-mail:

[email protected].

5STORAGE

5.1 The controller in transportation packing can be stored at ambient temperatures minus 50 to +50 °С

and relative humidity up to 95% at +35 °С.

5.2 The controller in the consumer packing shall be stored in heated warehouses at temperatures +5 to

+40 °Сand relative humidity up to 80% at +20 °С.

6TRANSPORTATION

6.1 The devices can be transported in transportation packing at ambient temperatures minus 50 to +50°С

and relative humidity up to 95% at +35°С.

7DISPOSAL

7.1 While disposing the device please take into account that there are no toxic components within it.

7.2 Precious material content: not subject to inventory accounting in case of storage, disposal and

recycling (Article 1.2 of GOST 2.608-78).

7.3

The content of non-ferrous metals: does not require accountability for retirement and further disposal

8MANUFACTURER WARRANTY

8.1 The manufacturer guarantees that the product meets technical requirements if the user follows the

instructions for transportation, storage, installation, and usage.

8.2 Warranty period is 18 months since putting the controller into operation but no more than 24 months

from the manufacturer's date of issue.

9CONFORMITY CERTIFICATES

9.1 Proxy-KeyAV, Proxy-KeyAH, Proxy-KeyMV, Proxy-KeyMH standalone access controllers with

built-in proximity reader and keypad meet the requirements of Technical Regulations of Custom Union

TR CU 020/2011 and approved by Conformity Certificate No. RU С-RU.МЕ61.В.01753.

9.2 Proxy-KeyAV, Proxy-KeyAH, Proxy-KeyMV, Proxy-KeyMH standalone access controllers with

built-in proximity reader and keypad are approved by the certificate of conformity of transportation

security technical arrangement with their functional properties No. МВД РФ.03.000037 issued by Federal

State Institution "Special Equipment and Communications" Scientific and Manufacturing Association of

the Ministry of Internal Affairs of the Russian Federation.

9.3 The production of Proxy-KeyAV, Proxy-KeyAH, Proxy-KeyMV, Proxy-KeyMH standalone access

controllers with built-in proximity reader and keypad is certified according to GOST ISO 9001-2015 by

certificate No. ROSS RU.АБ66.К00003.

ACCEPTANCE AND PACKAGING CERTIFICATE

Product Serial Number Packager Day, Month, Year

Proxy-KeyAV

Proxy-KeyAH

Proxy-KeyMV

Proxy-KeyMH

Is manufactured, accepted in accordance with mandatory requirements of state standards and actual

technical documentation, approved as ready for operation, and packaged by CJSC NVP Bolid.

Ce manuel convient aux modèles suivants

Autres manuels bolid Contrôleurs d'accès IP

bolid

bolid S2000-2 Manuel utilisateur

Manuels Contrôleurs d'accès IP populaires d'autres marques

ZKTeco

ZKTeco SpeedFace-V5L Manuel utilisateur

Jantar

Jantar REX A-1-9 Manuel utilisateur

2N Access Unit Feuille d'instructions

Kedacom

Kedacom KSCA120 Series Manuel utilisateur

H3C

H3C WX2880X Manuel utilisateur

G4S

G4S S870-EX Mode d’emploi

PRASTEL

PRASTEL M2000PE Manuel utilisateur

Allegion

Allegion interflex IF-281 Cylinder Manuel utilisateur

TECOM

TECOM TS1067E Manuel utilisateur

Fermax

Fermax Memokey 100C Guide de l'utilisateur

Fermax

Fermax CITYLINE MEMOKEY Mode d’emploi

Software House

Software House iSTAR Pro 2U RM Mode d’emploi

AKCP

AKCP SP+ Manuel utilisateur

Bpt

Bpt HNA/102 Manuel utilisateur

Civintec

Civintec CV9601T-T-1F Manuel utilisateur

BioMax

BioMax N-X90W Manuel utilisateur

ZKTeco

ZKTeco OP-200 Manuel utilisateur

FingerTec

FingerTec s-Kadex Manuel utilisateur

bolid Proxy-KeyAV Manuel utilisateur

Manuels Contrôleurs d'accès IP populaires d'autres marques