Bodet WORLD STYLE Manuel utilisateur

WORLD STYLE

Multi time-zone clock

Quartz independent or radio

Irig B / Afnor receiver

On receipt, check carefully that the product has not been damaged during transport and, if necessary,

submit reservations to the carrier.

B.P. 1

49340 TRÉMENTINES

FRANCE

Tél. : (33) 2 41 71 72 00

Fax : (33) 2 41 71 72 02

www.bodet.com

Réf.: 605418 I

Table of contents

1 - CHECKING THE EQUIPMENT SUPPLIED .............3

2 - ELECTRICAL SAFETY STANDARDS ................3

3 - WORLD STYLE CLOCK INSTALLATION ..............4

3.1 - Wall support installation :......................5

3.2 - Ceiling bracket installation :.....................5

4 - ELECTRICAL CONNECTIONS ....................5

4.1 - Power supply ............................5

4.2 - External synchronisation.......................6

4.3 - Irig B / AFNOR coded time output (Independent version) ......7

5 - DISPLAYS AND TESTING CONFIGURATION ............7

5.1 - Setting the time :...........................8

Independent clock : ..........................8

IRIG B/AFNOR receiver clock : ....................8

5.2 - Configuration menu of displays ...................8

5.2.1 - Selecting the summer / winter time changes :.........9

5.2.2 - Example of programming: programmable mode .......12

5.2.3 - Selecting the time difference :................13

5.3 - Testing ...............................13

5.4 - Annex for time difference......................14

6 - TECHNICAL CHARACTERISTICS .................16

7 - ADJUSTING THE LIGHT INTENSITY ................18

8 - BACKUP ...............................18

9 - PRECAUTIONS FOR USE AND MAINTENANCE .........18

10 - WHAT TO DO IF...?.........CHECK : ................19

1 - CHECKING THE EQUIPMENT SUPPLIED

On receipt, check carefully that the product you received fits with what you have

ordered :

nWorld Style Clock model : 3, 4, 5 or 6 cities.

nClock version: Quartz independent or IRIG B/AFNOR coded time receiver.

nText sticker marking for each city.

nColour of diodes (red, yellow, green, blue).

nIf you have chosen an option: France Inter or DCF synchronisation antenna,

ceiling bracket or double sided bracket.

2 - ELECTRICAL SAFETY STANDARDS

nInstallation and maintenance of this equipment should only be carried out by

qualified personnel.

nSince the World Style clock is connected to a mains power supply, its

installation must comply with standard IEC 364 (NFC 15.100 for France).

nIndoor assembly (IP 41).

nThe power supply for this clock should include a max. 6A live neutral circuit

breaker, which can be quickly accessed upstream of the power line,

live/neutral interlocked. This circuit breaker must be switched off during

maintenance.

nThis equipment should be fixed in place before switching on.

nConnection of the earth on the installation according to diagram EE or EN

(earth/earth or earth/neutral).

nThis product should be installed in a residential, commercial or light industrial

environment.

Bodet accepts no responsibility for any use not in compliance with these

instructions.

Any modification to the product will invalidate the guarantee

3 - WORLD STYLE CLOCK INSTALLATION

Before deciding on the location, ensure good legibility of the

clock with regard to the angle of reading (120o) and possible

reflections of light. This clock is intended for installation

indoors.

Fixing holes position of wall mounting plate

Lengths in mm HGE

3 cities 176,5 420 773

4 cities 260 520 1040

5 cities 279,5 826 1307

6 cities 374 826 1574

130

105

210

2 oblong holes

Ø7 x 5

Cable entry

3.1 - Wall support installation :

Having loosened screw (B), unhook the clock from its wall bracket, then

remove the connectors.

Fix bracket (A) to the chosen location on the wall after threading the cables

through the cable carrier (F).

3.2 - Ceiling bracket installation :

The ceiling hanging adjusts to bracket (A) in the same way as when

wall hanging. Warning: do not forget to first put the cables through

the conduit on the bracket before fixing.

Having loosened screw (B), unhook the clock from its wall bracket,

then remove the connectors.

Fix bracket (A) to the chosen location on the wall after threading the

cables through the cable carrier (F).

4 - ELECTRICAL CONNECTIONS

4.1 - Power supply

nRemove the black protective cover on the terminal block (P).

nConnect the 230 Volts 50/60 Hz mains power supply (depending on the

model) to the terminal block (maximum wire cross section 1.5 mm² with 5 mm

bare).

nReplace the protective cover. Block the wires with cable clips.

N.B. :The mains supply unit for this display must include a max. 6A

live/neutral interlocked circuit breaker. This circuit breaker must be

switched off during maintenance.

The electronic card for each display is protected by a 0.8A 250 V fuse (F1).

The world clocks have been designed for a mains power supply of 230 Volts

± 10 % (depending on the model). For example, 230 V clocks will work

equally well in countries where the nominal mains voltage is 220 Volts or 240

Volts.

4.2 - External synchronisation

The clock can be synchronised via a radio antenna or an IRIG B/AFNOR

network.

nWith a France Inter / DCF radio antenna or

FI/DCF output on MIC GPS : connect the 2 wires

of the antenna or the Mic GPS to the radio input of

the world clock. (Refer to the diagram on page 4

ref. L)

Refer to the radio antenna instructions for

positioning the antenna.

nWith a France Inter / DCF radio antenna or

FI/DCF output on MIC GPS : connect the 2 wires

of the antenna or the Mic GPS to the radio input of

the world clock (Refer to the diagram on page 4

ref. L).

Refer to the radio antenna instructions for

positioning the antenna.

Note: A fixing hole is provided on the lefthand side

of the World clock for fixing the FI / DCF antenna. Thread the antenna cable

through the hole (ref. F page 4) on the wall bracket.

See details according to

the synchronisation type

4.3 - Irig B / AFNOR coded time output (Independent version)

An independent clock can synchronise another IRIG B / AFNOR receiver.

Connect the 2 wires for the IRIG B/AFNOR signal to terminal block (L) on the

transmitting World clock, as well as to terminal (L) on the world receiver clock.

5 - DISPLAYS AND TESTING CONFIGURATION

For models 3 to 6 cities, each display is linked to a keyboard with 2 keys “+”

and “Select” to ensure programming and light intensity adjustment (4 levels).

For the “radio quartz independent” clock versions an additional keyboard is

positioned on the lefthand side of the box in order to adjust the time base (no

keyboard for IRIG B/AFNOR coded time receiver versions).

For IRIG B/AFNOR coded time versions :

configure the coded time generator (master clock or world clock) so that it

distributes GMT time. Do not programme the summer / winter time change.

Carry out installation and electrical connections before setting the time.

World clock master World clocks receiver

View from above

2 adjustment keys on the left-hand

side of the box. Independent quartz

model only

Keyboard with 2 keys “+” and “Select” for

each display (interior edge).

5.1 - Setting the time :

Independent clock :

nWhen switched on the clock is automatically set to the correct time. With a

radio antenna, the time is automatically synchronised.

nThe 2 keys “+” and “Select” on the lefthand side of the box are used to adjust

the time displayed (Correcting the time if there is any discrepancy).

Pressing “Select”: decreases the time readout by one minute with each

pressure, altering the hour readout accordingly as it goes back. Warning :

wait 3 seconds to display the readout.

Pressing on “+” : increases the time readout by one minute with each

pressure, altering the hour readout accordingly as it goes forwards.

Warning : wait 3 seconds to display the readout.

The second counter is reset to zero with each pressure on “+” or “Select”.

IRIG B/AFNOR receiver clock :

The readouts give the time in the corresponding city as soon as power is

switched on and on reception of the time code from the master clock or World

clock.

nWarning: in the event of loss of AFNOR signal, each display will operate

independently for 1 hour before the readout disappears. Only the separating

dots in the centre of the display remain lit, showing that the clock is still on.

nThe World clock is programmed in the factory in order to configure each

display according to the name of the city required (city name on sticker).

nIn the event of the time or time change not agreeing, refer to paragraph B

below for how to configure the displays.

5.2 - Configuration menu of displays

Each display is configured separately. Repeat programming below for the

different World clock displays according to the number of cities.

nAccess the configuration menu for each display : press the “Select” key and

while holding it down, then press the “+” key for 3 seconds. (keyboard

situated below the corresponding display).

The World clock calculates and displays the local time corresponding to the

city according to the GMT time received with the summer / winter changes

and the time difference programmed for each display.

5.2.1 - Selecting the summer / winter time changes :

Using the “+” key, select the zone acting as reference for the summer/winter

time change dates, then confirm by pressing the “Select” key..

Reference Zone Display

No time change

Europe time change

United States/Canada time change

Programmable mode time change

or time changes at fixed dates.

Rules followed by Styles clocks to determine the summer periods :

Nota : for GMT, EUR, USA selection, see also the chapter 5.2.3 selecting the time

difference (page 13).

–G.M.T. mode :No winter / summer change.

–Europe mode (Eur) : from the last Sunday in March to the last Sunday

in October. The time change takes effect at 1 o’clock GMT. (In March

at 2 o’clock local time, forward + 1 hour. In October at 3 o’clock local

time, back – 1 hour).

Nota : Europe is divided in 3 hourly groups :

Continental Europe : France, Germany, Spain, ...

Western Europe : England, Ireland, Portugal, ...

Eastern Europe : Finland, Greece, ...

–United States / Canada Mode (USA): from the second Sunday of

March to the first Sunday of November. The time change takes effect

at 2 o’clock, local time.

–Programmable Mode (PrG): Every year dates for the hour change are

automatically calculated according to the programming below.

a) repetitive mode :

- selection of month (1 to 12) January (1) to December (12).

- selection of the day number (1 to 5) for the 1st, 2nd, 3rd, 4th or

last (5) of the month)

-selection of the day type (1 to 7) for Monday (1) to Sunday (7).

b) fixed date mode : input of an exact date for the summer time

change and an exact date for the winter time change.

The dates are defined each year in the country concerned.

For the 2 modes –1hr in summer to winter and +1hr in winter to

summer.

The time changes take effect at 2.00am local time.

Time changeover in PRG mode :

Step Display

1To access the configuration menu, press the “Select”

key and while holding it down, then press the “+” key for

3 seconds for each keyboard situated below the display.

Display (2nd digit) flashes to start up programming

2Press “+” to select the time change month choice of 1 to

12 (e.g. March 3 for the Northern Hemisphere and

October 10 for the Southern Hemisphere).

3Confirm with “Select”, the 3rd digit flashes

4Press “+” to select the 1st, 2nd, 3rd, 4th or last (5th) day of

the week or the fixed date (F) for the time change.

If choice is 1 to 5, go to the following step.

If choice is F, go to step 9.

5Your selection of the day (the 2nd of the month) in the

month flashes.

6Confirm with “Select”, the last digit flashes.

Table des matières

Autres manuels Bodet Horloge

Bodet

Bodet Profil 730 Manuel utilisateur

Bodet

Bodet Profil 730 OP Manuel utilisateur

Bodet

Bodet Opalys Date Manuel utilisateur

Bodet

Bodet Style 5 Seconde Manuel utilisateur

Bodet

Bodet 5 Seconde Manuel utilisateur

Bodet

Bodet Profil 730 Hospital Manuel utilisateur

Bodet

Bodet Profil 930 Manuel utilisateur

Bodet

Bodet HMS LED 10 Manuel utilisateur

Bodet

Bodet Profil 930 L Manuel utilisateur

Bodet

Bodet Cristalys Ellipse Manuel utilisateur

Bodet

Bodet Profil 930 Manuel utilisateur

Bodet

Bodet Style 5 Seconde Manuel utilisateur

Bodet

Bodet Profil TGV 950 Manuel utilisateur

Bodet

Bodet Profil 730 Hospital Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Bodet

Bodet Style 5S Hospital NTP Manuel utilisateur

Bodet

Bodet BTX6015 Manuel utilisateur

Bodet

Bodet DHF/DCF Interface Manuel utilisateur

Bodet

Bodet NTP 947 17x W6 Manuel utilisateur

Bodet

Bodet 5 Seconde Manuel utilisateur

Bodet

Bodet Profil 960 Series Manuel utilisateur

Bodet

Bodet Profil 930 Manuel utilisateur

Bodet

Bodet Style 12 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8256-AL Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

La Crosse Technology

La Crosse Technology WT-3141b Manuel

La Crosse Technology

La Crosse Technology W86531 Manuel utilisateur

Sharp

Sharp SPC900 Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-50447 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur

LG LEC-005 Manuel utilisateur