NAME AND FUNCTION DESCRIPTION ON FRONT
PANEL
13. Balance adjustor of loudspeaker 21.
Bass
adjustor
It's used to adjust the volume of
front!
It's used to adjust the bass effects of
rear loudspeaker. microphones that are connected with
The volumes of front and rear loudspeakers the terminals.
are same when the pin is at the middle It could be adjusted in the range of
position.
-10-+10dB.
14.
BGM
adjustor 22. Mediant adjustor
If tile external device or the accompanying It's used to adjust the mediant effects of
audio device is
used,
and if there is blank microphones that are connected with the
part after the track is over, it could adjust terminals.
the volume of background music. It could be adjusted in the range of
-10-+10dB.
15. Bass adjustor
It's used to adjust the accompanying audio 23. Treble adjustor
device and the bass volume in playing
DVD.
It's used to adjust the treble effects of
It could be adjusted in the range of microphones that are connected with the
-10-+10dS.
terminals.
It could be adjusted in the range of
16. Mediant adjustor
-10-+10dB.
It's used to adjust the accompanying audio
device and the bass volume in playing
DVD.
24. Microphone
1/
A adjustor
It could be adjusted in the range of It's used to adjust the output volume of
-10-+10dS.
front microphone 1 and the rear MIC A.
17. Treble adjustor 25. Microphone 2/B adjustor
It's
used
to adjustthe accompanying audio It's used to adjust the output volume of
device and the treble volume in playing
DVD.
front microphone 2 and the rear MIC S.
It could be adjusted in the range of
-10-+10dB.
26. Microphone 3 adjustor
In general conditions, it could adjust the
It's
used to adjust the output volume
bass,
mediant and treble through the of front microphone 3.
standard level
(0).
If it adjusts too much, it might damage the 27. Echo reverberation
on/off
switch
loudspeaker and produce echo. It could set up the reverberation effect of
microphone 3.
18. Echo reverberation selection switch After turning on the reverberation, it
It's used to select the monophony/stereo could add the reverberation effect in the
echo. sound effect of microphone:
When the user selects the monophony, the and when turning off the reverberation,
reverberation effect shall be at the middle it could output the microphone sound
part of left and right loudspeakers. only and turn off all reverberation effects.
When the stereo is selected, the sound of
microphone shall be spread on the left/right 28. 29. 30. Microphone input terminals
track. The terminals connecting with microphones.
19. Echo reverberation repeat times 31. Power switch
adjustor Press the power switch to turn on the
It's used to adjust the repeat times of power and further press to turn off the
reverberation effect. power.
20. Echo reverberation delay adjustor
It's used to adjust the continuation of
echo reverberation. 7
