BM PRO BatteryPlus35SR Manuel utilisateur
INSTALLATION GUIDE
+RVView
BatteryPlus35
Make sure there is
adequate external
ventilation to or
a larger internal
cavity. Remove
battery if access is
required.
1
Mount securely to
a suitably strong
surface, using four
pre-drilled holes.
2
Install RVView where
it won’t be subject
to water or liquids.
Drill a 25mm hole to
fit the data cable to
the RVView. Connect
BatteryPlus35 with
the data cable.
3
Mount the RVView
(screws provided)
then remove clear
protective plastic
from the front cover.
4
INSTALLATION GUIDE
+RVView
BatteryPlus35
Connect Pin 1
negative to the
Chassis.
Connect the
caravan battery to
the terminals.
Connect the Battery
to BatteryPlus35SR
Batt + & - inputs.
The battery negative
return must be
connected to the
BatteryPlus35
“BATT-” only. The
battery negative
must not be directly
connected to the
chassis AX (Auxiliary)
DC Input Connection.
567
Install the Solar
Input positive and
negative input
terminals.
Connect all load
negative returns
directly to the
BatteryPlus35
negative terminals
only. Then connect
the positive outputs.
Install the Battery
fuse. Suitable fuse
protection MUST be
provided for the “AX”
input.
INSTALLATION GUIDE
+RVView
BatteryPlus35
8910
Autres manuels pour BatteryPlus35SR
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels BM PRO Accessoires pour appareils photo
