BlueParrott Point VXi Manuel utilisateur

VXi BlueParrott®

PointTM

User Guide

VXi BlueParrott®PointTM User Guide PAGE 2

TABLE OF CONTENTS

Safety Information .............................................3

Package Contents..............................................4

Glossary of Terms ..............................................5

Headset Overview..............................................6

Charging the Headset ........................................7

• Battery Power Indicators

• Operation While Using the Charger/Adapter

Getting Started ..................................................9

• On/Off/Standby

• Pairing with a Phone

– NFC (One-Touch) Pairing

– Regular Pairing

• Wearing and Adjusting the Point

• Making/Taking Calls

Advanced Features and Functions....................14

• Multiple Device Pairing

• Multipoint Mode

• Additional Features and Functions

– Last Number Redial

– Call Waiting/Rejecting a Call

– Rejecting a Call

– Phone Voice Control (e.g. Siri®or Google NowTM)

– Muting

– Transferring Audio

– Turning Headset Indicator Lights On/Off

• Resetting Headset Paired Devices List

Functions & Indicators Table ............................ 18

VXi BlueParrott®PointTM User Guide PAGE 3

IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your hearing. To avoid

injury, set the volume to the lowest comfortable level. If you experience ringing in your ears, or voices sound

muffled, stop using the headset. Avoid turning up the volume to block noisy surroundings. It’s possible for

your ears to adapt to volume that is too high, and this could result in permanent hearing damage without

any noticeable discomfort.

• Check with local and state laws regarding cell phone/headset usage while operating a motor vehicle.

• Do not immerse any part of this product in water.

• Plastic bags and small parts may cause choking if ingested. Keep them away from small children and pets.

• Use only the power cords included with this product.

• Avoid temperatures exceeding 140° F (will cause equipment failure).

SAFETY INFORMATION

VXi BlueParrott®PointTM User Guide PAGE 4

PACKAGE CONTENTS

1. BlueParrott®PointTM Headset

2. Choice of Ear Buds

(multiple sizes)

3. Choice of Ear Hooks

(multiple sizes)

4. USB Charging Cable

5. Quick-Start Guide*

6. Warranty and Compliance Insert*

*Not pictured.

Images are not shown to scale.

VXi BlueParrott®PointTM User Guide PAGE 3

IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your hearing. To avoid

injury, set the volume to the lowest comfortable level. If you experience ringing in your ears, or voices sound

muffled, stop using the headset. Avoid turning up the volume to block noisy surroundings. It’s possible for

your ears to adapt to volume that is too high, and this could result in permanent hearing damage without

any noticeable discomfort.

• Check with local and state laws regarding cell phone/headset usage while operating a motor vehicle.

• Do not immerse any part of this product in water.

• Plastic bags and small parts may cause choking if ingested. Keep them away from small children and pets.

• Use only the power cords included with this product.

• Avoid temperatures exceeding 140° F (will cause equipment failure).

SAFETY INFORMATION

VXi BlueParrott®PointTM User Guide PAGE 4

PACKAGE CONTENTS

1. BlueParrott®PointTM Headset

2. Choice of Ear Buds

(multiple sizes)

3. Choice of Ear Hooks

(multiple sizes)

4. USB Charging Cable

5. Quick-Start Guide*

6. Warranty and Compliance Insert*

*Not pictured.

Images are not shown to scale.

VXi BlueParrott®PointTM User Guide PAGE 5

GLOSSARY OF TERMS

• On: Headset is on, but there is no connection to the phone (red light will flash).

• MFB: Abbreviation for “Multifunction Button.”

• Multipoint Mode: Multipoint Mode allows you to connect and switch between two Bluetooth devices.

• Paired: Two Bluetooth devices agree to communicate with one another.

• Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call

(blue light will flash).

• Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call

(blue light will flash).

VXi BlueParrott®PointTM User Guide PAGE 6

HEADSET OVERVIEW

A. Volume Up/Mute

B. Volume Down

C. Microphone Boom

D. On/Off Switch

E. Indicator Lights

F. Multifunction Button (MFB)

G. NFC Zone (pictured below)

NFC Zone

VXi BlueParrott®PointTM User Guide PAGE 5

GLOSSARY OF TERMS

• On: Headset is on, but there is no connection to the phone (red light will flash).

• MFB: Abbreviation for “Multifunction Button.”

• Multipoint Mode: Multipoint Mode allows you to connect and switch between two Bluetooth devices.

• Paired: Two Bluetooth devices agree to communicate with one another.

• Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call

(blue light will flash).

• Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call

(blue light will flash).

VXi BlueParrott®PointTM User Guide PAGE 6

HEADSET OVERVIEW

A. Volume Up/Mute

B. Volume Down

C. Microphone Boom

D. On/Off Switch

E. Indicator Lights

F. Multifunction Button (MFB)

G. NFC Zone (pictured below)

NFC Zone

VXi BlueParrott®PointTM User Guide PAGE 7

CHARGING THE HEADSET

Connect the USB charger cord into the headset’s

USB charging port. If the headset is not fully

charged, the indicator will turn red. When the

indicator turns blue and stays blue, the unit is

fully charged. A fully discharged battery will

need approximately 1.5 hours to achieve a

complete charge.

Battery Power Indicators

While charging, the indicator light shows

the level of battery power on your Point

as follows:

Blue light: Fully charged. Over 6 hours’

talk time.

Red light: Less than a full charge.

For best performance, keep charging

the headset when not in use.

NFC Zone

Headset Charging Port

Indicator Light Location

VXi BlueParrott®PointTM User Guide PAGE 8

CHARGING THE HEADSET (continued)

Operation While Using the Charger/Adapter

The Point headset should be operated from battery power only. If you connect the headset to a charger

while it is turned on, it will reset and shut off. To turn it back on again, first unplug the headset from the USB

charging cord, slide the switch to the “off” position (if not already done), then back to the “on” position.

NOTE: Do not attach the charger mid-call. This will cause the headset to reset, and the call will be sent back

to the phone.

VXi BlueParrott®PointTM User Guide PAGE 7

CHARGING THE HEADSET

Connect the USB charger cord into the headset’s

USB charging port. If the headset is not fully

charged, the indicator will turn red. When the

indicator turns blue and stays blue, the unit is

fully charged. A fully discharged battery will

need approximately 1.5 hours to achieve a

complete charge.

Battery Power Indicators

While charging, the indicator light shows

the level of battery power on your Point

as follows:

Blue light: Fully charged. Over 6 hours’

talk time.

Red light: Less than a full charge.

For best performance, keep charging

the headset when not in use.

NFC Zone

Headset Charging Port

Indicator Light Location

VXi BlueParrott®PointTM User Guide PAGE 8

CHARGING THE HEADSET (continued)

Operation While Using the Charger/Adapter

The Point headset should be operated from battery power only. If you connect the headset to a charger

while it is turned on, it will reset and shut off. To turn it back on again, first unplug the headset from the USB

charging cord, slide the switch to the “off” position (if not already done), then back to the “on” position.

NOTE: Do not attach the charger mid-call. This will cause the headset to reset, and the call will be sent back

to the phone.

VXi BlueParrott®PointTM User Guide PAGE 9

GETTING STARTED

On/Off/Standby

Turn Headset On: Slide the switch down towards the boom to expose a green bar in the switch cavity.

The LED will flash blue three times and you will hear a voice prompt, “Power on.”

Turn Headset Off (conserves battery power): Slide the switch up towards the back of the headset to

expose a red bar in the switch cavity. The LED will flash red four times and you will hear a voice prompt,

“Power off.”

Standby Mode: Once the headset is turned on (after the initial pairing), it will attempt to connect to the

last device that it was paired with, putting itself into Standby Mode.

Pairing with a Phone

NFC (One-Touch) Pairing

1. Confirm that your cell phone is NFC-capable.

2. Make sure that NFC is enabled on your cell phone.

3. Turn the headset on.

4. Place the NFC zone of your cell phone against the NFC zone

of the headset and hold together while your cell phone

registers the headset.

5. Follow the prompts on your cell phone until it confirms pairing is successful.

Note: NFC and One-Touch Pairing are dependent on your cell phone. The size and sensitivity of your

phone’s NFC zone and how to connect the headset may vary between devices.

NFC Zone

VXi BlueParrott®PointTM User Guide PAGE 10

GETTING STARTED (continued)

Manual Pairing

Placing Headset into Pairing Mode

When you turn the headset on for the first time, or if its pairing memory has been wiped clear, it will go

into pairing mode automatically. If the headset has already been paired with another device, you will need

to manually put it into pairing mode if you are not going to use NFC Pairing.

Power on the headset, then press and hold the MFB for approximately 6 seconds until you hear the audio

prompt “Discovering.” The headset will be visible for pairing to devices for 120 seconds.

Pairing to a Cell Phone

1. Make sure that other Bluetooth devices are turned off or out of range.

2. Place the headset into pairing mode.

3. Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions.

4. Select “VXi Point” to pair. (Passcode is “0000” if needed.)

5. When connected, the headset will give you the voice prompt, “Your headset is connected” and the

indicator light will flash blue.

VXi BlueParrott®PointTM User Guide PAGE 9

GETTING STARTED

On/Off/Standby

Turn Headset On: Slide the switch down towards the boom to expose a green bar in the switch cavity.

The LED will flash blue three times and you will hear a voice prompt, “Power on.”

Turn Headset Off (conserves battery power): Slide the switch up towards the back of the headset to

expose a red bar in the switch cavity. The LED will flash red four times and you will hear a voice prompt,

“Power off.”

Standby Mode: Once the headset is turned on (after the initial pairing), it will attempt to connect to the

last device that it was paired with, putting itself into Standby Mode.

Pairing with a Phone

NFC (One-Touch) Pairing

1. Confirm that your cell phone is NFC-capable.

2. Make sure that NFC is enabled on your cell phone.

3. Turn the headset on.

4. Place the NFC zone of your cell phone against the NFC zone

of the headset and hold together while your cell phone

registers the headset.

5. Follow the prompts on your cell phone until it confirms pairing is successful.

Note: NFC and One-Touch Pairing are dependent on your cell phone. The size and sensitivity of your

phone’s NFC zone and how to connect the headset may vary between devices.

NFC Zone

VXi BlueParrott®PointTM User Guide PAGE 10

GETTING STARTED (continued)

Manual Pairing

Placing Headset into Pairing Mode

When you turn the headset on for the first time, or if its pairing memory has been wiped clear, it will go

into pairing mode automatically. If the headset has already been paired with another device, you will need

to manually put it into pairing mode if you are not going to use NFC Pairing.

Power on the headset, then press and hold the MFB for approximately 6 seconds until you hear the audio

prompt “Discovering.” The headset will be visible for pairing to devices for 120 seconds.

Pairing to a Cell Phone

1. Make sure that other Bluetooth devices are turned off or out of range.

2. Place the headset into pairing mode.

3. Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions.

4. Select “VXi Point” to pair. (Passcode is “0000” if needed.)

5. When connected, the headset will give you the voice prompt, “Your headset is connected” and the

indicator light will flash blue.

VXi BlueParrott®PointTM User Guide PAGE 11

GETTING STARTED (continued)

Wearing and Adjusting the Point

The headset is provided with the medium-loop ear bud

already attached. If you need to change it, peel it off

and replace with the ear bud of your choice.

Choose the ear bud and ear hook (if desired) that best

fits your ear.

The headset can be worn on either ear, with or without

the ear hook. The ear hooks are left and right specific

and are marked with an “L” for left or “R” for right to

show which side they are for.

To attach an ear hook, clip the “C” of the hook over the

neck of the receiver.

VXi BlueParrott®PointTM User Guide PAGE 12

GETTING STARTED (continued)

When wearing your Point, adjust the fit by rotating the

ear bud so that the stabilizer loop (if applicable) presses

against the back curve of your ear. Make sure that the

boom is pointing towards the corner of your mouth.

To get the best performance from our noise-canceling

technology, angle the microphone boom towards the

corner of your mouth. Positioning is important; small

adjustments in microphone placement can improve

performance.

Table des matières

Autres manuels BlueParrott casque

BlueParrott

BlueParrott M300-XT SE Manuel utilisateur

BlueParrott

BlueParrott B250-XT Manuel utilisateur

BlueParrott

BlueParrott B450-XT MS Fiche technique

BlueParrott

BlueParrott B550-XT Manuel utilisateur

BlueParrott

BlueParrott C300-XT Manuel utilisateur

BlueParrott

BlueParrott B250-XT Manuel utilisateur

BlueParrott

BlueParrott S450-XT Fiche technique

BlueParrott

BlueParrott C400-XT Manuel utilisateur

BlueParrott

BlueParrott S650-XT Fiche technique

BlueParrott

BlueParrott M300-XT Manuel utilisateur

BlueParrott

BlueParrott B550-XT Manuel utilisateur

BlueParrott

BlueParrott VXI REVEAL PRO Manuel utilisateur

BlueParrott

BlueParrott VXi Reveal Manuel utilisateur

BlueParrott

BlueParrott CP110 Manuel utilisateur

BlueParrott

BlueParrott C300-XT Fiche technique

BlueParrott

BlueParrott B250-XT Manuel utilisateur

BlueParrott

BlueParrott B350-XT Manuel utilisateur

BlueParrott

BlueParrott B350-XT Manuel utilisateur

BlueParrott

BlueParrott C400-XT Manuel utilisateur

BlueParrott

BlueParrott B450-XT Fiche technique

BlueParrott

BlueParrott M300-XT Manuel utilisateur

BlueParrott

BlueParrott B250-XT Manuel utilisateur

BlueParrott

BlueParrott B650-XT Manuel utilisateur

BlueParrott

BlueParrott B350-XT Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur