Blue Tiger Black Box Manuel utilisateur
Blue Tiger USA | www.bluetigerusa.com
1
Thank You!
Thank you for purchasing the Black Box™ by Blue Tiger®. This dash or windshield
mountable camera is your first line of defense in traffic incident litigation protection.
With a full 1080p HD camera, photograph capability, high-quality night recording,
motion detection, voice record and external SD memory, the Black Box™ produces
great picture quality and a reliable user experience.
Please take a few moments to review the contents of this manual in order to ensure
the best user experience.
Blue Tiger USA | www.bluetigerusa.com
2
Get to know the Black Box™:
Blue Tiger USA | www.bluetigerusa.com
3
1. Record /Camera (OK) button
2. Bracket hole
3. Front camera
4. Night vision/Photo flash
5. Bracket screw hole
6. GPS module port
7. Reset button
8. USB Slot
9. SD card port
10. Up/LED light on-off
11. Power / Mode Button
12. Down/front, LCD screen contrast
13. Microphone
14. Working indicator (Blue) / Charging
indicator (Red)
15. Menu key
16. 2.7 inch LCD display
17. GPS Module (available as an add on
from www.bluetigerusa.com and select
retailers)
Blue Tiger USA | www.bluetigerusa.com
4
Basic Usage Instructions:
Before turning on your Black Box™, insert a compatible microSD card into the memory
card slot on the side of the camera under the plastic guard to the right of the menu
controls. Blue Tiger recommends using at least a Class 4 microSD HC name brand
memory card in order to get the best performance from your camera. The memory
card included with your Black Box™ is a Class 10 SanDisk Ultra HC.
After the microSD has been installed, turn the camera on using the Power/Mode
button on the right side of the menu controls.
Once the camera has been turned on it will automatically enter record mode.
IMPORTANT NOTE: Never remove the microSD card while the camera is on. Doing so
may damage the memory card or the Black Box™DVR Dash Camera.
Blue Tiger USA | www.bluetigerusa.com
5
Safe Operating Temperatures:
The Black Box™ is designed for operating use within the temperature range of 30° and
90° Fahrenheit. Operating or leaving the camera in environments outside of this “safe
zone” may cause permanent damage to your camera and will not be covered by
warranty.
For instance, leaving your camera mounted on your windshield while your vehicle is
parked and the temperature outside the vehicle is 85° F could cause permanent
damage to your camera. It is recommended that you remove the camera from the
windshield and place it somewhere that is not in direct sunlight in circumstances like
these.
Power Modes:
Use built-in Polymer battery
The built in lithium polymer battery allows the camera to operate without being
Blue Tiger USA | www.bluetigerusa.com
6
hooked up to a power source for 2 to 4 hours when fully charged and not using the
LCD preview screen.
Use included car charger
When the vehicle is started, the Black Box™ will automatically come on and begin
recording will also enter charging mode. You may turn the camera off after charging
has begun. While charging, the LED light will light up red. Once charged, the battery
icon on the screen will show fully charged.
Note: This device can only use a power source output of 5V.
Blue Tiger USA | www.bluetigerusa.com
7
Setting up the Date and Time:
In order to set up the date and time, press the menu button and scroll down to “Date
and Time”, then press the camera/ok button on the top of the Black Box.
In this menu, the month will be selected. Use the up and down keys to change the
month and press the camera/ok button to confirm. Once confirmed, the day field will
be automatically selected. Repeat this procedure until all fields have been updated,
then exit the Date and Time screen.
Installation Instructions:
1. Find a clear and secure place to mount the camera. Use a clean and soft cloth to
wipe off the surface that you are mounting the camera to and remove the adhesive
cover that is stuck to the bracket pad. Install the camera with bracket pad and secure
on the windshield or dashboard.
2. Connect camera’s USB terminal and car cigarette lighter to the power source.
Blue Tiger USA | www.bluetigerusa.com
8
3. Adjust the camera position to attain the best view.
Make sure the lens perpendicular to the ground 90°.
4. Check to see if the device has installed correctly.
Operation Instructions:
Record Mode
Press and hold the “POWER” button to turn on the device. Then press the “OK” button
to enter record mode. The device will begin recording. (Note: be sure to insert the SD
card before attempting to record) While recording, the blue LED light will flash
indicating that the device is recording. Press the “OK” button again to stop recording.
Still Photo Camera Mode
Press the “MODE” button once to enter still photo camera mode.
Blue Tiger USA | www.bluetigerusa.com
9
Playback Mode
Press the “MODE” button twice to enter preview/playback mode. Press OK to confirm.
Use the UP/Down button to select the file directory that you want to browse. Files are
sorted by year, month, and day. Select the file you would like to view and press the
OK button to begin playback. Press the OK button again to pause playback.
Setting Record Options in the Recording Menu
To access the recording options, turn on the camera and enter recording mode, then
press the MENU button to enter the camera settings interface. Press the UP/DOWN
button to select the setting from the list that you would like to modify and press OK.
You may then press the UP/DOWN button to change the parameters of each selection
and confirm your change by pressing the OK button again.
Recording Options
1. Recording Resolution: 640x480 (lowest picture quality), 1280x720,
1920x1080(best picture quality)
2. Sound recording: open/close
3. Volume Level
Autres manuels pour Black Box
1
Table des matières
Autres manuels Blue Tiger Caméra embarquée
