Blue Technix Argos3D - P100 Manuel utilisateur
Argos3D - P100
Quick Start Guide
Version 1.6
Bluetechnix
Waidhausenstraße 3/19
A-1140 Vienna
AUSTRIA
office@bluetechnix.com
www.bluetechnix.com
Argos3D - P100 - Quick Start Guide
Document No.: 900-308 / A
Publication date: July 10, 20144
Applicable to: plugins release ≥0.3
Subject to change without notice. Errors excepted.
This document is protected by copyright. All rights reserved. No part of this document may be reproduced or
transmitted for any purpose in any form or by any means, electronically or mechanically, without expressly
written permission by Bluetechnix GmbH.
Windows is a registered trademark of Microsoft.
©Bluetechnix 2014
Table of Contents
1Unboxing .......................................................................................................................................... 5
1.1 In the box .................................................................................................................................. 5
1.2 Connecting your Argos3D-P100................................................................................................. 5
1.2.1 Connector Overview .......................................................................................................... 5
1.2.2 Connecting the power supply............................................................................................ 6
1.2.3 Connecting USB2.0 cable ................................................................................................. 6
2Evaluation Package.......................................................................................................................... 7
2.1 Support website ........................................................................................................................ 7
2.2 Login Screen ............................................................................................................................. 8
2.3 Register as new customer ........................................................................................................ 8
3Install Argos3D - P100 Drivers ......................................................................................................... 11
4Start using your Argos3D - P100 with ‘‘Visualizer’’ .......................................................................... 18
4.1 Working with ‘‘Visualizer’’........................................................................................................ 19
4.1.1 Connection (1).................................................................................................................. 19
4.1.2 Applying source- and process-commands (2) ................................................................ 19
4.1.3 Changing the color range (3) ........................................................................................... 19
4.1.4 Statistics (4) ..................................................................................................................... 20
4.1.5 Status Information (5)....................................................................................................... 20
4.1.6 Changing the integration time (6) .................................................................................... 20
4.1.7 Changing the frame rate (7) ............................................................................................. 20
4.1.8 Generic register read/write (8) ......................................................................................... 20
5System Requirements & Support................................................................................................... 21
5.1 Visualizer ................................................................................................................................. 21
5.2 LightVis.................................................................................................................................... 21
5.3 Support ................................................................................................................................... 21
6Index............................................................................................................................................... 22
©Bluetechnix 2014
© Bluetechnix 2014
All Rights Reserved.
The information herein is given to describe certain components and shall not be considered as a guarantee
of characteristics.
Terms of delivery and rights of technical change reserved.
We hereby disclaim any warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Bluetechnix makes and you receive no warranties or conditions, express, implied, statutory or in any
communication with you. Bluetechnix specifically disclaims any implied warranty of merchantability or fitness
for a particular purpose.
Bluetechnix takes no liability for any damages and errors causing of the usage of this board. The user of this
board is responsible by himself for the functionality of his application. He is allowed to use the board only if
he has the qualification. More information is found in the General Terms and Conditions (AGB).
Information
For further information on technology, delivery terms and conditions and prices please contact Bluetechnix
(http://www.bluetechnix.com).
Warning
Due to technical requirements components may contain dangerous substances.
©Bluetechnix 2014
Quick Start Guide - Argos3D - P100
1Unboxing
1.1 In the box
•Argos3D - P100
•Micro USB Cable
•5VDC/3A Power Supply
•Tripod
•Quick Start Guide
•Argos3D - P100 Support CD including SDK, Visualizer, manuals etc.
•Argos3D - P100 ADAF Basic CD
1.2 Connecting your Argos3D-P100
1.2.1 Connector Overview
The Argos3D - P100 features three connectors. A 5VDC@2.5A connection, Micro USB2.0 and an external sync
interface.
a b
c
Figure 1-1: Connector Overview
a. Modulation Light Interface
b. Micro USB 2.0 Interface
c. Power Connector
NOTE: Please follow the next steps in the right order to get your ‘P100’ up and running correctly.
© Bluetechnix 2014 Page 5 | 22
Quick Start Guide - Argos3D - P100
1.2.2 Connecting the power supply
To ensure, that your Argos3D - P100 works correctly, plug in the power supply and wait for approximately 10
seconds until the camera boots up.
Figure 1-2: Connecting Power Supply
1.2.3 Connecting USB2.0 cable
After boot up, plug in the micro USB2.0 cable and connect your Argos3D - P100 to a free USB port of your
PC.
Figure 1-3: Connecting USB2.0 cable
© Bluetechnix 2014 Page 6 | 22
Quick Start Guide - Argos3D - P100
2Evaluation Package
The Argos3D - P100 Evaluation Package containing of the SDK, Visualizer, documentation etc. can be found
on the enclosed Support CD. For updates register on our support website at
https://support.bluetechnix.com/ and download the latest version of the Evaluation Package for your
Argos3D - -- P100.
‘‘ADAF Basic’’ is included on a separate CD.
2.1 Support website
Figure 2-1: Download Evaluation Package
© Bluetechnix 2014 Page 7 | 22
Quick Start Guide - Argos3D - P100
Figure 2-3: Registration form
© Bluetechnix 2014 Page 9 | 22
Quick Start Guide - Argos3D - P100
Once you downloaded the evaluation package extract the .zip file on your hard drive to e.g.
C:\Argos3D-P100\and read the Readme.txt first.
Figure 2-4: Unzipped Evaluation Package
© Bluetechnix 2014 Page 10 | 22
Autres manuels pour Argos3D - P100
2
Table des matières
Autres manuels Blue Technix Caméra 3D
Manuels Caméra 3D populaires d'autres marques
KANDA
KANDA Obsidian S Manuel utilisateur
TeraBee
TeraBee TB-3DCAM-8060-USB Manuel utilisateur
SICK
SICK Ranger3 Manuel utilisateur
Radio Engineering Industries
Radio Engineering Industries SV-360HD Manuel de l'opérateur
Intel
Intel RealSense D400 Series Manuel utilisateur
Reality Technologies
Reality Technologies Madshot Manuel de la liste des pièces