Blu Stream MX44KVM Manuel utilisateur

MX44KVM

User Manual

RevA0_MX44KVM_User_Manual_210830

1111222233334444

DEVICE 1

4x4 USB KVM Matrix

DEVICE 2 DEVICE 3 DEVICE 4

SELECT SELECT SELECT SELECT

USB HOST RS-232 1IR CTRLTCP/IPUSB DEVICES RS-232 2

1234

24V 1.25A

TX RX TX RX 1 2 34

GPIO

MX44KVM

1234

MX44KVM USER MANUAL

www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk02

Surge Protection Device

Recommended

This product contains sensitive

electrical components that may be

damaged by electrical spikes, surges,

electric shock, lightning strikes, etc.

Use of surge protection systems is

highly recommended in order to

protect and extend the life of your

equipment.

Contents

Thank you for purchasing

this product.

For optimum performance and safety,

please read these instructions care-

fully before connecting, operating or

adjusting this product. Please keep this

manual for future reference.

Introduction 03

Features 03

Front Panel Description 04

Rear Panel Description 04

Infrared (IR) Control 05

Web GUI Control 05 - 11

Remote Control Description 12

IR Commands 12 - 13

Specifications 14

Package Contents 14

Maintenance 14

RS-232 Config & Telnet Commands 15 - 16

Web-GUI Firmware Update 17 - 18

Example Schematic 19

Certifications 20

MX44KVM USER MANUAL

Contact: support@blustream.com.au |support@blustream-us.com |support@blustream.co.uk 03

Our 4x4 USB 3.0 KVM Matrix oers unprecedented performance and value for the custom

and commercial installation market. The MX44KVM is a USB 3.0 Matrix package allowing 4x

USB peripheral devices to be shared between 4x host devices, supporting plug-and-play

capabliities, and USB data transfer rates up to 5Gbps.

The Matrix provides advanced features including cascading of multiple MX44KVM units,

GPIO functionality for 3rd party product triggers, an in-built web browser interface

module for control and configuration of the Matrix, along with RS-232 for seamless control

integration. An RS-232 loop-through connection allows for the MX44KVM to be intrinsically

linked to any Blustream video matrix product for the addition of KVM support to our

video-only switching products.

Introduction

FEATURES:

• 4x4 USB KVM Matrix allowing up to 4x USB peripheral devices to be shared between 4x host devices

• USB 3.0 conectivity with data transfer rates up to 5Gbps

• Backwards compatible with USB 2.0 and 1.1

• Plug-and-play with no drivers, downloads, or soware required

• USB-A connections provide 5V 900mA

• Features 4x configurable GPIO ports for integration with 3rd party products

• Features RS-232 loop-through for repetition of incoming RS-232 commands to additional Blustream products

• Assignable inputs and outputs allowing automated switching when used with existing Blustream Matrix products

• Web interface module for control and configuration of the MX44KVM

• Control via front panel, IR, RS-232, and TCP/IP

MX44KVM USER MANUAL

www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk04

Front Panel Description

Rear Panel Description

2 3

1Power LED - Illuminates blue when the device is powered on. Illuminates red when the device is powered o

2Selection LED – The illuminated number correspnds to the USB Host the selected USB Device is routed to

3Select Button - Press to cycle the selected USB Device through each USB Host output

1111222233334444

DEVICE 1

4x4 USB KVM Matrix

DEVICE 2 DEVICE 3 DEVICE 4

SELECT SELECT SELECT SELECT

USB HOST RS-232 1IR CTRLTCP/IPUSB DEVICES RS-232 2

1234

24V 1.25A

TX RX TX RX 1 2 34

GPIO

MX44KVM

1234

1USB Host - Connects to USB port of Host device

2USB Device - Connects to USB Devices or peripherals

3TCP/IP - RJ45 connector for TCP/IP and Web-GUI control of the Matrix

4IR Control Input - 3.5mm stereo connector to connect to Blustream IR receiver for IR control of the Matrix

5RS-232 Port 1 - 3-pin Phoenix connector for direct RS-232 control of the Matrix

6RS-232 Port 2 - 3-pin Phoenix connector for RS-232 pass-through to cascaded MX44KVM or a Blustream HDMI/

HDBaseT Matrix

7GPIO Port - 5-pin Phoenix connector for input sense/output relay/contact closure control of 3rd party devices

824V/1.25A DC power input 4-pin DIN connector

1111222233334444

DEVICE 1

4x4 USB KVM Matrix

DEVICE 2 DEVICE 3 DEVICE 4

SELECT SELECT SELECT SELECT

USB HOST RS-232 1IR CTRLTCP/IPUSB DEVICES RS-232 2

1234

24V 1.25A

TX RX TX RX 1 2 34

GPIO

MX44KVM

1234

2 4 5 6 7 8

MX44KVM USER MANUAL

Contact: support@blustream.com.au |support@blustream-us.com |support@blustream.co.uk 05

This following pages outlines the operation of the Matrix Web-GUI. Connect the TCP/IP RJ45 socket to the local

network in order to access the products Web-GUI, or connect a PC directly to the TCP/IP port for initial configuration.

By default the Matrix is set to DHCP, however if a DHCP server (eg: network router) is not installed the matrix IP address

will revert to the below details:

Default IP Address: 192.168.0.200 Default Username: blustream Default Password: 1234

The Web-GUI supports multiple users along with multiple user permissions as follows:

Guest Account - This account does not require a user to login. The Guest account can only change sources for each

zone. Guest access can be changed by the Admin, limiting inputs or outputs as necessary.

User Accounts - 7x User accounts can be utilised, each with individual login details. User accounts can be assigned

permissions to specific areas and functions. A User must log in to make use of these functions.

Admin Account - This account allows full access to all functions of the Matrix, as well as assigning users with individual

permissions.

Web-GUI Control

The Blustream range of matrix products include Matrix control via IR.

IMPORTANT: Blustream Infrared products are all 5V and NOT compatible with alternative manufacturers

Infrared solutions. When using third party 12V IR control solutions please use the Blustream IRCAB cable for IR

conversion.

IR Receiver - IRR

Blustream 5V IR receiver to receive

an IR signal for control of the matrix.

IR Control Cable - IRCAB (supplied)

Blustream IR Control cable 3.5mm Mono to

3.5mm Stereo for linking third party control

solutions to Blustream products.

Compatible with 12V IR 3 party products.

Please Note: cable is directional as

indicated.

IR Receiver - Stereo 3.5mm

Infrared (IR) Control

Signal

Ground

MX44KVM USER MANUAL

www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk06

The Login Page allows a User or Admin to login and access additional functionality.

This page displays the current firmware version of both the Matrix and Web-GUI.

Guest Control Page

The Guest Control Page allows a guest to change inputs for each zone without needing to be logged into the matrix.

Simply select the square that corresponds with the input and zone needing to be changed.

There is also a power button on the lower right corner to turn the Matrix on or o.

MX44KVM USER MANUAL

Contact: support@blustream.com.au |support@blustream-us.com |support@blustream.co.uk 07

User Control Page

A logged in User, or Admin Control page allows a User to change inputs and/or presets for each Host. To change inputs,

select the square that corresponds with the input and zone output needing to be changed. On the right, a preset can

be recalled, or save the current input/output configuration into a specified preset slot.

There is also a power button on the lower right corner to turn the Matrix on or o.

Host Configuration Page

The Host Configuration page allows each of the USB Host inputs to be assigned an ID assosciated with an input into

a Blustream AV Matrix, as well as a name. This is particularly useful when being used in conjunction with a Blustream

AV Matrix. The MX44KVM can be cascaded with multiple MX44KVM units, with each USB Host assigned a specific ID

number to switch with the associated inputs on additional MX44KVM, or AV Matrix products.

MX44KVM USER MANUAL

www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk08

Device Configuration Page

The Device Configuration page allows each of the USB Device peripherals to be assigned an ID assosciated with an

input into a Blustream AV Matrix, as well as a name. This is particularly useful when being used in conjunction with a

Blustream AV Matrix. The MX44KVM can be cascaded with multiple MX44KVM units, with each USB Device assigned a

specific ID number to switch with the assosciated output on additional MX44KVM, or AV Matrix products.

Preset Configuration Page

The Preset Configuration Page allows a User to change the naming of the presets on the Control Page of the Matrix for

simpler navigation by additonal users.

MX44KVM USER MANUAL

Contact: support@blustream.com.au |support@blustream-us.com |support@blustream.co.uk 09

GPIO Page

The GPIO (General Purpose Input / Output) page allows for the configuration of the functionality of the GPIO ports on

the MX44KVM.

Each of the MX44KVM’s four I/O ports can be configured as either Inputs or Outputs, and have the following

independent options available:

Input Triggers:

The MX44KVM can be triggered to carry out an action when a voltage is sensed from one of the GPIO’s set to Input.

Trigger Conditions: Low Level (0-6V), or High Level (6-12V)

Trigger Event: Activate Standby, or Activate Auto Switching

Output Triggers:

The MX44KVM’s outputs can be used as either a contact closure, or to output a 5V or 12V trigger for a set period of

time.

Output type: 5V 50mA, 12V 50mA, or contact closure

Output duraction: 1min to 60mins, or always on

MX44KVM USER MANUAL

www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk10

RS-232 Page

The RS-232 page allows for commands to be sent out of the local RS-232 port on the Matrix.

Baud rate and terminator command, as well as Hex or ASCII can be selected.

Sending an RS-232 command out via the Matrix can be useful in assisting with debugging and fault finding an RS-232

device connected to the Matrix.

Network Page

The Network page allows the ability to specify the TCP/IP network port settings. Static IP or DHCP, can be selected

as well as specification of a fixed IP Address, Subnet Mask and Gateway. The Telnet port can also be adjusted for

individual control systems as required.

Autres manuels pour MX44KVM

Table des matières

Autres manuels Blu Stream Commutateur matriciel

Blu Stream

Blu Stream Contractor CMX88AB Manuel utilisateur

Blu Stream

Blu Stream HMXL44-KIT V2 Manuel utilisateur

Blu Stream

Blu Stream MX44AB-V2 Manuel utilisateur

Blu Stream

Blu Stream C88CS Manuel utilisateur

Blu Stream

Blu Stream C88 Manuel utilisateur

Blu Stream

Blu Stream HMXL88ARC Manuel utilisateur

Blu Stream

Blu Stream Essential HMXL42ARC-KIT Manuel utilisateur

Blu Stream

Blu Stream Custom Pro Matrix Series Manuel utilisateur

Blu Stream

Blu Stream C66CS Manuel utilisateur

Blu Stream

Blu Stream PLA88CS Manuel utilisateur

Blu Stream

Blu Stream HMXL88 Manuel utilisateur

Blu Stream

Blu Stream C44-KIT Manuel utilisateur

Blu Stream

Blu Stream HMXL44AB Manuel utilisateur

Blu Stream

Blu Stream C44-KIT Manuel utilisateur

Blu Stream

Blu Stream MX44KVM Manuel utilisateur

Blu Stream

Blu Stream HMXL44AB Manuel utilisateur

Blu Stream

Blu Stream CMX44AB Manuel utilisateur

Blu Stream

Blu Stream MX42AB Manuel utilisateur

Blu Stream

Blu Stream HMXL88 V2 Manuel utilisateur

Blu Stream

Blu Stream HMXL66 Manuel utilisateur

Blu Stream

Blu Stream Contractor CMX44CS Manuel utilisateur

Blu Stream

Blu Stream C66CS Manuel utilisateur

Blu Stream

Blu Stream HMXL44CS-KIT Manuel utilisateur

Manuels Commutateur matriciel populaires d'autres marques

Broadcast Tools

Broadcast Tools SS 8.2 Manuel utilisateur

Altimium

Altimium MATF32 Manuel utilisateur

ALFAtron

ALFAtron ALF-MUK44N Manuel utilisateur

Monoprice

Monoprice Blackbird 15377 Manuel utilisateur

Kramer

Kramer XL 3216VS Manuel utilisateur

PTN

PTN FMX12 Manuel utilisateur

CYP

CYP nT15GX01 Manuel utilisateur

Kramer

Kramer VP-2x2 Manuel utilisateur

Kramer

Kramer Sierra Video 6432V5xl Manuel utilisateur

TESmart

TESmart HMA0402A40 Manuel utilisateur

Octava

Octava HD4XSTPMX Manuel utilisateur

Intelix

Intelix FLX-88 Mode d'emploi

Kramer

Kramer LASSEN XL 3232S Manuel utilisateur

Roland

Roland XS-1HD Manuel utilisateur

Kramer

Kramer VS-66HDCPxl Manuel utilisateur

Atlona

Atlona AT-HDMI-22M Manuel utilisateur

Link

Link HD8X8 Manuel utilisateur

AMX

AMX AVS-OP-2020-117 Instructions et recettes