BlazeVideo A350 Manuel utilisateur
TRAIL CAMERA
MODEL#: A350
INSTRUCTION MANUAL
V1.0
TABLE OF CONTENT (English)
1. IN THE BOX................................................................... 1
2. IMPORTANT NOTE.......................................................1
3. INTRODUCTION............................................................1
3.1. ABOUT THE CAMERA....................................... 1
3.2. MAIN FEATURES............................................... 2
3.3. APPLICATIONS.................................................. 3
4. PARTS AND CONTROLS..............................................3
5. INSTALLING THE BATTERIES AND SD CARD.......6
5.1. LOADING BATTERIES....................................... 6
5.2. INSERTING THE SD CARD............................... 7
6. USING THE CAMERA...................................................8
7. THE OFF, ON, AND SURVEILLANCE MODES......... 9
7.1. OFF MODE.........................................................9
7.2. ON MODE........................................................... 9
7.3. SURVEILLANCE MODE...................................10
8. ADVANCED SETTINGS..............................................10
9. MOUNTING AND POSITIONING.............................. 15
9.1. MOUNTING...................................................... 15
9.2. SENSING ANGLE AND DISTANCE TEST....... 16
9.3. STARTING......................................................... 17
10. REVIEW PHOTOS OR VIDEOS................................18
11. TECHNICAL SPECIFICATIONS.............................. 19
12. TROUBLESHOOTING...............................................21
13. WARRANTY...............................................................22
INHALTSVERZEICHNIS (German)
1. INHALT DER BOX.......................................................23
2. WICHTIGE ANMERKUNG......................................... 23
3. EINFÜHRUNG..............................................................24
3.1. ÜBER DIE KAMERA.........................................24
3.2. HAUPTMERKMALE......................................... 24
3.3. ANWENDUNGEN............................................. 25
4. KOMPONENTEN UND KONTROLLEN....................25
5. BATTERIEN UND SD-KARTE EINLEGEN.............. 29
5.1. BATTERIEN EINLEGEN...................................29
5.2. SD-KARTE EINSTECKEN................................ 30
6. VERWENDUNG DER KAMERA................................31
7. ON-, OFF- UND ÜBERWACHUNGS-MODUS..........32
7.1. OFF-MODUS.................................................... 32
7.2. ON-MODUS...................................................... 32
7.3. ÜBERWACHUNGS-MODUS............................33
8. ERWEITERTE EINSTELLUNGEN............................. 34
9. MONTAGE UND POSITIONIERUNG........................40
9.1. MONTAGE........................................................ 40
9.2. TEST VON ABTASTWINKEL UND ABSTAND 41
9.3. BEGINNEN........................................................43
10. FOTOS ODER VIDEOS ANSEHEN..........................43
11. DIE TECHNISCHEN DATEN....................................44
12. FEHLERBESEITIGUNG............................................ 46
13. GARANTIE................................................................. 47
1
1. IN THE BOX
1 x Camera, 1 x Mount Strap,
1 x Instruction Manual, 1 x Mini USB Cord
Note: Memory card and batteries are not included (user supplied).
2. IMPORTANT NOTE
Require eight (8) 1.5V AA Alkaline or Lithium batteries. We
recommend the use of Energizer AA Lithium batteries in this
camera to obtain maximum battery life.
Do not mix old and new batteries.
Do not mix battery type.
Rechargeable NiMH AA batteries are NOT recommended as
the lower voltage (generally 1.2V) they produce can cause
operational issues.
Remove batteries when the camera is NOT in use.
Require a regular SD memory card (max capacity 512GB,
Class 10). We recommend using SanDisk 32GB
SDHC/Class10 memory cards in the camera to obtain the best
cost-performance.
Before use, please gently remove the protective films on the
front of the camera to get the best performance, format your
SD card in the camera.
3. INTRODUCTION
3.1. ABOUT THE CAMERA
The A350 trail camera is a new generation of digital scouting
camera, it can be triggered by any movement of game in a
2
location, detected by a highly sensitive Passive Infra-Red (PIR)
motion sensor, and then take high quality pictures (up to
32MP still photos), or 1296P H.264 video clips with audio.
The camera features the all new innovative and ultra-clear
imaging technology. The camera encompasses all-new
software innovations, smart illumination technology, blur
reduction technology, auto noise reduction and dynamic
exposure technology to deliver high resolution image quality.
3.2. MAIN FEATURES
High quality pictures (up to 32MP still photos), 1296P
20fps or 1080P 30fps H.264 video clips with audio
Clear night vision, flash range 100ft. The camera is
equipped with 36pcs high-performance infrared no glow
940nm LEDs that function as a flash, invisible to eyes
Wide view angle - 70°
Easy to use with well-designed operation buttons and
built-in 2.4-inch color screen, easy to program, review
pictures and videos on the screen
Two working modes - Motion detection and Time lapse
Fast trigger time approx. 0.1~0.6 seconds (pre-activated
technology with 3 PIR sensors designed), Fast recovery
time of less than 0.5 second, Long trigger distance up to
90ft.
Info strip on each capture: Date, Time, Temperature &
Moon phase
Operation hours, Loop recording, Password protected
Built for any climate - IP66 Waterproof designed for
outdoor use and resistant against rain and snow. Operation
Temperature: -4~140°F
3
Support SD/SDHC/SDXC memory card, max capacity
512GB (user supplied)
Extremely long in-field battery life up to 8 months in a
stand-by state with 8 AA 1.5V batteries (user supplied)
3.3. APPLICATIONS
The camera can be used as follows:
For hunting and tracking animals’ trace or habits
For wildlife observing and researching, captures pictures
and videos of wild animals
As a sports camera, for riding, driving, camping or
exploring
As a motion-triggered security camera, for home, farm,
office and community
All other indoor & outdoor surveillance where invasion
evidence needed
4. PARTS AND CONTROLS
The camera is equipped with 36pcs high efficiency infrared
LEDs, LED Indicators, Lens, PIR Sensors, Lock Holes in
front view (Figure 1).
TIP: During use, if the black PIR Lens are dirty, it does not
affect the performance. If you must clean it, please try to blow
it off or pick out the dirt very lightly. Do not try to wipe it,
which may cause more scratches. Due to the reliability design
of the PIR lens, scratches do not reduce the PIR detection
performance.
4
Figure 1: Front View
The camera provides the following connections for external
devices: Mini USB port and SD card slot etc. (Figure 2).
Figure 2: Bottom View
The camera has one security cable hole and two strap holes on
the back. The strap can be put through the strap holes and
Tripod Base
1/4" - 20
SD Card
Holder
DC 12V/1A
Plug 5.5x2.1mm
Mini USB Port
Microphone
IR LEDs
Lock Hole
Side PIR
Motion Sensor
Optical
Lens
Center PIR
Motion Sensor
Side PIR
Motion Sensor
Light
Sensor
Indicator
5
fastened securely around the tree trunk by pulling the end of
the strap firmly (Figure 3).
Figure 3: Right / Back View
The camera has a 2.4-inch built-in LCD screen, which can be
used for reviewing pictures or videos and menu displaying,
and exclusive keypad design for easy program and operation,
8 AA batteries slot supported (Figure 4).
Figure 4: Inside View
Strap
Hole
Lock
Buckle
Color
Screen
Battery
Compartment
and Cover
Operation
Buttons
Security
Cable Hole
6
Figure 5: Operation Buttons
A power switch is used to power on (ON mode) or off the
camera (OFF mode). A START button is used to quickly
make the camera into the surveillance mode (motion detection
or time lapse per your settings (Figure 5). When the camera is
in the surveillance mode, press the START button to wake up
the camera.
5. INSTALLING THE BATTERIES AND SD CARD
Before you begin learning how to use your camera, you will
first need to install a set of batteries and insert an SD card.
Although that may only take you a minute, there are some
important notes about both batteries and SD cards you should
be aware of, so please take the time to read the following
directions and cautions:
5.1. LOADING BATTERIES
After opening the cover of the battery compartment, you will
see that the camera has eight battery slots (Figure 6). A full
eight batteries must be installed for the camera to operate. Be
sure to insert each battery with correct polarity (negative or
"flat" end against the long spring of each battery slot).
Power
Switch
Surveillance
Mode
7
In the ON mode when battery power level gets low, the
message "Low Battery" will show on the screen, please
replace the batteries. If the battery indicator shows in RED,
this does mean the batteries are not able to drive IR LEDs
flash at night, however the batteries still work at daytime until
"Low Battery". If you want to continue night vision, please
replace the batteries.
Figure 6: Loading the Batteries
5.2. INSERTING THE SD CARD
Insert the SD card (with the camera powered off), before
beginning to operate the camera. Don't insert or remove the
SD card when the camera is powered on or in the surveillance
mode. (Figure 7).
Figure 7: Inserting the SD Card
+
一
Table des matières
Langues :
Autres manuels BlazeVideo Caméra de repérage
BlazeVideo
BlazeVideo A390G Manuel utilisateur
BlazeVideo
BlazeVideo A323 Manuel utilisateur
BlazeVideo
BlazeVideo A252 Manuel utilisateur
BlazeVideo
BlazeVideo A323 Manuel utilisateur
BlazeVideo
BlazeVideo A350W Manuel utilisateur
BlazeVideo
BlazeVideo T326 Manuel utilisateur
BlazeVideo
BlazeVideo A323 Manuel utilisateur
BlazeVideo
BlazeVideo A280W Manuel utilisateur
BlazeVideo
BlazeVideo A252 Manuel utilisateur
BlazeVideo
BlazeVideo A262 Manuel utilisateur
