Black BLK-HDC20 Manuel utilisateur
BLK-HDC20 2 Megapixel Full-HD C-mount
Box Camera User Manual
Please read this manual before using your camera, and always follow the instructions
for safety and proper use. Save this manual for future reference.
BLK-HDC20_CM
ii
WARNING
!Changes or modications not expressly approved by the manufacturer could void the user’s authority to operate the
equipment.
CAUTION
To prevent electric shock and risk of re hazards, use a power source that is within specication only.
Do NOT expose this appliance to rain or moisture.
REGULATORY NOTICE
This equipment may generate or use radio frequency energy. Changes or modications to this equipment may
cause harmful interference unless the modications are expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an unauthorized change or modication is made.
REGULATORY INFORMATION : FCC Part 15
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
LEGAL NOTICE
Observint Technologies (Observint) products are designed to meet safety and performance standards with the use
of specic Observint authorized accessories. Observint disclaims liability associated with the use of non-Observint
authorized accessories.
The recording, transmission, or broadcast of any person’s voice without their consent or a court order is strictly
prohibited by law.
Observint makes no representations concerning the legality of certain product applications such as the making,
transmission, or recording of video and/or audio signals of others without their knowledge and/or consent. We
encourage you to check and comply with all applicable local, state, and federal laws and regulations before
engaging in any form of surveillance or any transmission of radio frequencies.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks
and names or their products. Observint disclaims any proprietary interest in trademarks and trade names other than
its own.
No part of this document may be reproduced or distributed in any form or by any means without the express written
permission of Observint.
© 2012 by Observint, Inc. All Rights Reserved.
11000 N. Mopac Expressway, Building 300, Austin, TX 78759
For Sales and Support, please contact your distributor.
iii2 Megapixel Full-HD C-Mount Box Camera User Manual
PRECAUTIONS
WARNING - Do not install this equipment in a conned space such as a bookcase or similar unit.
WARNING - Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.
WARNING - This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
WARNING - To reduce a risk of re or electric shock, do not expose this product to rain or moisture.
CAUTION - Installation should be performed by a qualied service person and should conform to all local codes.
CAUTION - To avoid electrical shock, do not open the camera enclosure. Refer servicing to qualied personnel only.
CAUTION - This camera should not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases,
should be placed on it.
CAUTION - Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by
the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end use.
Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with bushings.
DISPOSAL OF YOUR OLD APPLIANCES
1. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated
collection facilities appointed by the government or local authorities.
2. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human
health.
3. For more detailed information about disposal of your old appliance, please contact your city oce, waste disposal service or
the shop where you purchased the product. To disconnect power from the mains, pull out the mains cord plug. When install
the product, ensure that the plug is easily accessible.
iv
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions - All these safety and operating instructions should be read before the product is operated.
2. Keep these instructions - The safety, operating and user instructions should be retained for future reference.
3. Heed all warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow all instructions - All operating and user instructions should be followed.
5. Do not use this apparatus near water - For example : near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet
basement; near a swimming pool; etc.
6. Clean only with dry cloth - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. - Slots and openings in
the cabinet are provided for ventilation, to ensure reliable operation of the product, and to protect it from overheating. The
openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s
instructions have been adhered to.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
v2 Megapixel Full-HD C-Mount Box Camera User Manual
TABLE OF CONTENTS
Table of Contents
PRECAUTIONS ...........................................................................iii
DISPOSAL OF YOUR OLD APPLIANCES ........................................................iii
IMPORTANT SAFETY INSTRUCTIONS ......................................................... iv
SECTION 1 Introduction .......................................................................1
1.1 Camera components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.2 What you need ......................................................................3
SECTION 2 Installation ........................................................................4
2.1 Install the camera mounting bracket ....................................................4
2.2 Attach the lens ......................................................................4
SECTION 3 Conguration Setup .................................................................7
3.1 Menu operation .....................................................................7
3.2 MODEL .............................................................................8
3.3 EXPOSURE ..........................................................................8
3.4 WHITE BALANCE .....................................................................9
3.5 IMAGE .............................................................................10
3.6 INTELLIGENCE ......................................................................11
3.7 SPECIAL FUNCTION ..................................................................12
3.8 DISPLAY ...........................................................................13
SECTION 4 Specications .....................................................................14
APPENDIX A Troubleshooting ...................................................................16
APPENDIX B Camera Dimensions ................................................................17
vi
12 Megapixel Full-HD C-Mount Box Camera User Manual
SECTION 1: INTRODUCTION
SECTION 1
Introduction
This high denition indoor C/CS mount camera features 2.2 megapixel imaging with 1920 x 1080 resolution along with
3-dimensional Noise Reduction (3D-NR). 3D-NR automatically provides a more accurate noise reduction. This is based on twice the
visual information than conventional eld-based types. The video noise is reduced by 30 % in low light for a 2 dB improvement in
the signal-to-noise ratio. The result is a brighter picture with less noise, even in low light.
High denition video – HDcctv security cameras deliver true 1080p or 720p HD video, true HDTV-quality video in live and recorded
view modes.
A lens is not included
Features
• 1/3” Panasonic CMOS sensor
• Full HD Resolution
• HDMI output
• HD SDI output (SMPTE 292M)
• Composite video out (BNC)
• DAY & NIGHT
• WDR (Wide Dynamic Range)
• Defog, privacy mask functions
• On Screen Display
• Intelligent motion detection
• Multi Protocol (PELCO-D, PELCO-P)
1.1 Camera components
Camera holder hole
(upper side and underside)
Lens
(not provided)
Lens iris output
connector
Flange-back set screw
2
SECTION 1: INTRODUCTION
NOTES:
• Lens: The camera accommodates a standard C or CS mount lens.
• Camera holder hole: Provided on the upper side and underside of the camera housing.
• Flange back (back focus) set screw: Used to lock the ange back. The adjustment is required only when a lens without
focus-adjusting mechanism is mounted, or when a lens with adjusting mechanism is mounted and more accurate focus that
is needed.
• Lens iris output connector: 4-pin connector used to send the Iris control signal and power supply to an auto-iris type lens.
NOTE: Use only direct-drive or DC-drive lenses with this connector.
4
2
3
1Pin DC -type lenses
1 Damping -
2 Damping +
3 Drive +
4 Drive -
1.1.1 Camera back panel
Joystick
OSD controls
Power LED
Main cable
terminal
HDMI out
connector
HD-SDI video
out terminal
BLK-HDC10 back connectors
NOTES:
• HD-SDI video out terminal BNC terminal for HD-SDI video signal output
• Joystick, OSD controls: Used to navigate the OSD menus See “3.1 Menu operation” on page 7 for more information.
32 Megapixel Full-HD C-Mount Box Camera User Manual
SECTION 1: INTRODUCTION
• HDMI out connector: HDMI terminal for HD-SDI video signal output.
• Main cable terminal: 6 pin main cable connector. See below
Power connector
C video output
RS-485 leads
—Power connector: 12 Vdc (center +)
—C video output: analog video output or C-Video
—RS-485 leads: Signal port for RS-485 communication (yellow +/ green -)
• Power LED - LED lights when the power is applied to the camera.
1.2 What you need
To install the camera you will need:
• C- or CS-type lens
• 12 Vdc 1 A power source
• Mounting bracket
• Tools for mounting the camera
4
SECTION 2: INSTALLATION
SECTION 2
Installation
2.1 Install the camera mounting bracket
The camera can be attached to a mounting bracket on the upper side or the underside of the camera. Always follow the
manufacture’s guidelines when installing the mounting bracket.
2.2 Attach the lens
The camera will accommodate a DC-drive or direct-drive C- or CS-type lens. To attach the lens, do the following:
1. Remove the lens mounting cap from the lens mounting ring.
Cap
2. Carefully screw the lens assembly clockwise onto the lens mounting ring until it is fully seated. Tighten until snug.
Lens
Lens mounting ring
Table des matières
Autres manuels Black Appareil photo numérique
