Black Box IC650A Manuel utilisateur

User’s Manual

USB 2.0 4-Port Hub

Table of Contents

Introduction…………………………………………..…………………………….…1

Package Contents….………………………………………..…………..………...…1

Safety Instructions….……………………………………………………...…..……1

Features…………...….………………………………..…………………….…..… …2

Specification…………………………………………….………………..………..…2

System Requirements…………………………….………..……………..……..….3

Hardware Installation……………………….………………..………..…….…..….3

Installation Verification……………...…………………..……..……..…….…..….4

Over-Current Status Figure……...……………………...………..……………..…7

Certificate……………………….…………………………………….……………….8

Disclaimer……………………..…………..………………………..…………...…….9

Introduction

Thank you for purchasing our USB 2.0 4-port hub that allows you to add multiple

high performance USB 2.0 peripheral devices to your PC. The USB 2.0 hub is

fully compliant with the USB 1.1 specification, i.e. your previous USB 1.1 devices

can continue to function as usual. This convenient device allows you to connect

up to a maximum of 127 USB devices to your PC through daisy chain.

Package Content

●USB 2.0 4-port Hub

●Power Adapter (optional)

●User’s Manual

●USB Cable (optional)

Safety Instructions

1. Always read the safety instructions carefully.

2. Keep the User’s Manual for reference.

3. Keep the equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. If any of the following situations arises, please contact a service technician

for diagnostics:

?? The equipment has been exposed to moisture.

?? The equipment has been dropped or damaged.

?? If the equipment has obvious sign of breakage.

?? The equipment has not been working well or it is still not functioning after

you follow the User’s Manual.

Features

??Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate

1.5/12/480 Mbps)

??Connectsup to 127 USB Devices

??Bus-power and self-power mode used

??Plug-and-playfunction

??1 upstream and 4 downstream USB ports included

??Over-current detection and protection

??1 red LED as power-on indicator (In some models, there is a green LED

indicator for each downstream port apart from the red LED.)

Specification

Function Specification

Ports 1upstream port and4downstream ports

Compliance FCC regulations for home or office use CE emissions

Bus-Power: 5V 500mA

Self-Power: 5V 2.5A

Power

Adapter

Input: 100~240v 50Hz-60Hz

Output:5V 2.5A

Storage Temperature -10~85 ℃

Working Temperature

0~40 ℃

System Requirements

●Desktop or notebook computer with USB port

●One of the following operating systems (no driver needed):

?? Windows®98/SE

?? Windows®ME

?? Windows®2000

?? Windows®XP

?? MacTM X

Hardware Installation

Upstream: Connects to PC or MAC

Type B Receptacle

Type A Plug

Downstream: Connectto Devices

X 4

Type A Receptacle (The arrangement can be different)

Power Jack: Connects to Power Adapter

5V / 2.5A

Installation Verification

After you connecting this hub to PC by a USB cable, the system will detect the

device and install the required drivers automatically. After installation finished,

you can go toDevice Manager to verify the completed installation*.

* According to previous description, the driver is based on host system. The following

image is based on USB 1.1 hub installed. The device name maybe varied on your host

driver.

Windows 98SE:

Windows ME:

Windows 2000:

Windows XP:

Remark:

If your operating system is Windows ME, which will has a green question mark shown in

Device Manager. It is all right because Windows ME cannot identify the USB Hub's brand

but it won’t have any impact on its function.

Over-Current Status Figure

?? When the

excessive current

happen, the over protection will

disconnect power from the related

port, which green LED goes off.

?? If there is a pop-up window, “

USB

Hub Current Limit Exceeded

“,

please click Reset

to resume work

or you can reset the hub by

unplugging

the USB cable and

plugging it back.

Mac OS:

After installation finished, please go to “Apple System Profiler\Devices and

Volumes\USB” to verify the installation completed.

Certificate

FCC

This equipment has been tested and found to comply with Part 15 of the FCC

Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received. Including interference

that may cause undesired operation.

CE –Certificate

This equipment is in compliance with the requirements of the following

regulations: EN 55 022: CLASS B

Disclaimer

Information in this document is subject to change without notice. The

manufacturer does not make any representations or warranties (implied or

otherwise) regarding the accuracy and completeness of this document and shall

in no event be liable for any loss of profit or any commercial damage, including

but not limited to special, incidental, consequential, or other damage. No part of

this document may be reproduced or transmitted in any form by any means,

electronic or mechanical, including photocopying, recording or information

recording and retrieval systems without the express written permission of the

manufacturer.

Table des matières

Autres manuels Black Box Changer

Black Box

Black Box MT760A Manuel utilisateur

Black Box

Black Box SERVSWITCH ACU1006DRA Manuel utilisateur

Black Box

Black Box ServSwitch 4site Manuel utilisateur

Black Box

Black Box ServSelect II KV2016A Instructions d'installation et d'entretien

Black Box

Black Box LBH100A-PD-ST-24 Manuel utilisateur

Black Box

Black Box LB8405A-R3 Manuel utilisateur

Black Box

Black Box ServSwitch ACXCWDM4 Manuel utilisateur

Black Box

Black Box SW421A-R2 Manuel utilisateur

Black Box

Black Box LGB1126A-R2 Manuel utilisateur

Black Box

Black Box LGB524A Manuel utilisateur

Black Box

Black Box LIG1014A Manuel utilisateur

Black Box

Black Box KV7012A Manuel utilisateur

Black Box

Black Box SS2P-SH-HDMI-U Manuel utilisateur

Black Box

Black Box LGB1005A Manuel utilisateur

Black Box

Black Box SW056A Manuel utilisateur

Black Box

Black Box PS/2 Manuel utilisateur

Black Box

Black Box ServSwitch ACR9000A Manuel utilisateur

Black Box

Black Box ClassWork Junior Manuel utilisateur

Black Box

Black Box SW281A-R2 Manuel utilisateur

Black Box

Black Box ServSwitch Wizard DVI KV1002A Manuel utilisateur

Black Box

Black Box PSE518SA Manuel utilisateur

Black Box

Black Box LGB1108A Manuel utilisateur

Black Box

Black Box EMERALD EMD200DP-T Manuel utilisateur

Black Box

Black Box KV162A Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur