Black Box 38892-R2 Manuel utilisateur

Support up to 4, 8, or 16 channels over

fiber optic cable in limited-distance applications.

Support up to 4, 8, or 16 channels over

fiber optic cable in limited-distance applications.

4-, 8-, and 16-Port Fiber Optic Muxes

FREE 24-hour Tech Support: 724-746-5500

blackbox.com

2 of 3

6/7/2007

#22505

724-746-5500 blackbox.com

FEATURES

• Fiber optic multiplexor and line driver

in one compact unit.

• Ideal for limited-distance applications.

• Easy to install—no option switches to

set.

• Transparent to speed and protocol.

• Operates at distances up to 10,000 feet

(3048 m) over duplex multimode fiber

optic cable.

• Supports software (X-ON/X-OFF)

flow control.

Use the multimode fiber optic cable in your small-to-medium-sized campus

to connect 16 PCs to an async host up to 10,000 ft. (3048 m) away

with the 16-Port Fiber Optic Mux.

OVERVIEW

Why buy a mux and a line driver separately when you can

get both in one convenient package. If you have fiber optic

cable installed in your small-to-medium-sized campus,

consider our 4-, 8-, or 16-Port Async Local Fiber Optic RS-232

Muxes.

These async time-division multiplexors support up to 4,

8, or 16 channels at speeds up to 19.2 kbps (38890-R2 or

38892-R2) or 64 kbps (38888-R2). And the integral line driver

for duplex multimode fiber gives you point-to-point

communications over short distances (up to 10,000 feet

[3048 m]).

Compared to statistical multiplexors and leased-line

modems, the TDM (Time-Division Multiplexor) and line-driver

combination offers a couple of advantages for limited-

distance applications:

• Although SPM (Statistical Packet Multiplexing) is very

efficient, it’s also much more expensive than TDM.

If you have limited distances to carry data, the fixed

bandwidth used by TDMs gets you more for your money.

• Leased-line modems are not used between devices in

the same building or close to each other. To send data

a short distance over private, point-to-point fiber optic

cable systems, you’d typically use a line driver.

Synchronization between Asynchronous Local RS-232

Muxes is maintained continuously with no operator control

required. A Sync Loss indicator on the front of the unit alerts

you if loss of sync occurs.

These muxes automatically adapt port speeds to the rates

of the individual terminals, without requiring a clock source.

All ports operate at maximum throughput levels with virtually

no multiplexing delay. As DTE speeds vary, high-speed

data sampling on each port makes the unit transparent to

error control, EIA signal propagation, or flow control.

16-Port Fiber Optic Mux

(38892-R2)

Async Host

PCs

16-Port Fiber Optic Mux

(38892-R2)

PCs

3 of 3

6/7/2007

#22505

724-746-5500 blackbox.com

TECH SPECS

Maximum Distance — 10,000 ft. (3048 m) over duplex multimode fiber

Multiplexing Technique — Time-division

Operation — Full duplex

Protocol — Async

Speed — 38892-R2, 38890-R2: 19.2 kbps;

38888-R2: 64 kbps

Interface — Channel: RS-232;

Composite: Dual ST®

Connectors — Composite: All: (2) ST;

Channel: 38888-R2: (4) RJ-45;

38890-R2: (8) RJ-45;

38892-R2: (16) RJ-45

Indicators — (3) LEDs: Power, Composite Data, Sync Loss

Power — 115-VAC, 60-Hz external power supply

Size — 38888-R2, 38890-R2: 1.7"H x 7"W x 5.3"D (4.3 x 17.8 x 13.5 cm);

38892-R2: 2.2"H x 7"W x 5.3"D (5.6 x 17.8 x 13.5 cm)

Weight — 38888-R2, 38890-R2: 2 lb. (0.9 kg);

38892-R2: 2.5 lb. (1.1 kg)

Item Code

Async Local Fiber Optic RS-232 Multiplexor

4-Port 38888-R2

8-Port 38890-R2

16-Port 38892-R2

Optional accessories include…

Telephone Bulk Cable EL08A

Fiber Optic Duplex Bulk Cable EXN062A

Modular Adapters

DB25 Male/RJ-45 for DTE 523951

DB9 Female/RJ-45 for DTE 523953

DB25 Female/RJ-45 for DTE 523954

DB25 Male/RJ-45 for DCE 523952

Time-division multiplexing.

TDM operates by dividing the available bandwidth into

fixed-duration segments. Each segment or channel is assigned

to a user and is given its own time slot to access the network.

First, information from Channel A is transmitted, then

information from Channel B, and so on in a regular sequence,

continually cycling back to Channel A. Bandwidth allocation is

static: Each channel receives a fixed amount of bandwidth,

preset by the network administrator.

TDM is a relatively inexpensive multiplexing technique and

is simple to implement, so it has typically been the first

multiplexing technique applied to any new high-speed

bandwidth service at first offerings. TDM introduces very little

signal delay, so it’s well suited to transport data, voice, and

video traffic, provided enough bandwidth is available.

The figure on page 2 shows a mux merging 16 data

channels over dual fiber optic cable. Each data channel can

achieve speeds of up to 19.2 kbps with the 38892-R2 or 38890-

R2, 64 kbps with the 38888-R2.

Technically Speaking

38892-R2

Why choose fiber?

Fiber optic cable offers several clear advantages over

twisted-pair:

• Using fiber completely eliminates the potential for

ground loops and electrical problems like crosstalk

(interference from an adjacent communication

channel).

• With fiber you also get more bandwidth and speed, as

well as longer distances, which means more data goes

farther faster.

Technically Speaking

Ce manuel convient aux modèles suivants

Autres manuels Black Box Matériel réseau

Black Box

Black Box AC1003A Manuel utilisateur

Black Box

Black Box 5000 series Manuel utilisateur

Black Box

Black Box Pow-R-Boot 5+ Manuel utilisateur

Black Box

Black Box LT2060A Manuel utilisateur

Black Box

Black Box FX6412NA Manuel utilisateur

Black Box

Black Box RADIAN 1000 Series Manuel utilisateur

Black Box

Black Box MT190A Manuel utilisateur

Black Box

Black Box ServSwitch KV1081A Manuel utilisateur

Black Box

Black Box Veri-NAC LVN5600A Manuel utilisateur

Black Box

Black Box EncrypTight ET0010A Manuel utilisateur

Black Box

Black Box ETHERLINK IV Manuel utilisateur

Black Box

Black Box MX325A-HS Manuel utilisateur

Black Box

Black Box Balun G.703 Manuel utilisateur

Black Box

Black Box LES1208A-R2 Manuel utilisateur

Black Box

Black Box LB300A-R3 Manuel utilisateur

Black Box

Black Box ACR2005A Manuel utilisateur

Black Box

Black Box MT1050A Manuel utilisateur

Black Box

Black Box MC144A Manuel utilisateur

Black Box

Black Box KV1308C Manuel utilisateur

Black Box

Black Box ACU5100A Manuel utilisateur

Black Box

Black Box Lineshare Pro AC FX150A Manuel utilisateur

Black Box

Black Box ME0005A-10BT Manuel utilisateur

Black Box

Black Box IC448A Manuel utilisateur

Black Box

Black Box COE-8I Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur